AT+i Programmer's Manual - SE Spezial-Electronic AG

Nonvolatile Parameter Database
33.13.13 +iSPN — SerialNET Server Phone Number
Syntax: AT+iSPN=number Permanently sets the SerialNET phone number to
use to wake up a remote SerialNET server.
Parameters: number = Telephone number to use to dial up a
remote SerialNET server in order to wake it up and
activate its preprogrammed Ring-Response
procedures. The SerialNET client will attempt
RDL redials. During each dial-up attempt it will
wait for SDT seconds before hanging up.
Command Options:
number = Telephone number string, composed of
digits, ‗,‘, '-', 'W', 'w', '*', '#', '!' or ' '. See
description of the standard ATD command 1 .
Default: Empty. Do not attempt to wake up a remote SerialNET
server.
Result code:
I/OK If number is a legal phone number string.
I/ERROR Otherwise
AT+iSPN? Report the current SerialNET wakeup telephone
number.
The reply is followed by I/OK.
AT+iSPN=? Returns the message ―Phone #".
The reply is followed by I/OK.
Note: If a character that is defined as a Delimiter is used within the dial string, the string
must be entered between apostrophes.