AT+i Programmer's Manual - SE Spezial-Electronic AG

Nonvolatile Parameter Database
33.12.2 +iRRSV — IP Registration Host Server Name
Syntax: AT+iRRSV=server_name:port
Permanently sets the IP registration server name
or IP and port number to be used in an IP
registration procedure .
Parameters: server_name = A server name or IP address.
Server names must be resolvable by the primary
or alternate DNS.
port = 0..65535
Command Options:
server_name='' Empty: No IP registration server name defined.
server_name=
ip_registration_server will be used to locate
and establish a connection after iChip
establishes an Internet session connection as a
result of an explicit AT+i command or as a
result of automated Internet session
establishment procedures. The dynamically
assigned IP address will be sent to the server
in ASCII form, after which the socket will be
closed. See Socket IP Registration.
port=
It is assumed that the host server is "listening"
on port number.
Default: Empty. No server defined.
Result code:
I/OK If ip_registration_server is an empty or legal
server name and port is within limits.
I/ERROR Otherwise.
AT+iRRSV? Report the current IP registration server name and
port number. If a server name does not exist, only will
be returned.
The reply is followed by I/OK.
AT+iRRSV=? Returns the message ‗Name/IP:Port‘.
The reply is followed by I/OK.