AT+i Programmer's Manual - SE Spezial-Electronic AG

33.9.2 +iRAU — Define RAS Login User Name
Nonvolatile Parameter Database
Syntax: AT+iRAU=user Permanently sets RAS login user name.
Parameters: user = User Name to be used for authentication
when accepting a call from a PPP client connecting
to iChip‘s internal RAS.
Command Options:
user='' Empty: iChip‘s internal RAS is effectively
disabled.
user = user-name will be used to establish login rights
of a remote PPP client connection to iChip‘s
internal RAS.
user =‖*‖ A user-name will not be required to authenticate
a remote PPP client connection to iChip‘s
internal RAS, effectively unrestricting remote
access.
Default: Empty. iChip‘s internal RAS is effectively disabled.
Result code:
I/OK If user is an empty or a legal login User Name.
I/ERROR Otherwise.
AT+iRAU~user Temporarily set the RAS login User Name to user.
The permanent value will be restored after
completing the next session, whether the session
was successful or not.
AT+iRAU? Report the current RAS login User Name. If the
User Name does not exist, only will be
returned. The reply is followed by I/OK.
AT+iRAU=? Returns the message ‗String‘.
The reply is followed by I/OK.