AT+i Programmer's Manual - SE Spezial-Electronic AG

Nonvolatile Parameter Database
Parameter Type Range Default
SerialNET Mode
Description
HSRV or String 64 chars NULL Set the remote host server name/IP and
HSRn
port.
HSS String 3 chars NULL Switches among three possible HSRV
parameters.
DSTR String 8 chars NULL Set the disconnection string template.
LPRT Unsigned
INT
0-65535 0 Set the SerialNET mode listen socket.
MBTB INT 0-2048 0 Max bytes to buffer while iChip is
establishing a connection.
MTTF Unsigned 0-65535 0 (None) Max inactivity timeout in milliseconds
INT
before flushing the SerialNET socket.
FCHR Byte 1 char 0 (None) Flush character. When received,
SerialNET socket will be flushed.
MCBF INT 0-1460 0 (None) Max. characters before flushing the
SerialNET socket.
IATO INT 0-32768 0 (None) Inactivity timeout in seconds before
closing the SerialNET connection.
SNSI String 9 chars ―5,8,N,1,0‖ SerialNET mode Serial interface
configuration. Defines baud, bits, parity,
stop and flow control.
STYP Byte 0..1 0 (TCP) Set the SerialNET mode socket type.
0 (TCP) or 1 (UDP).
SNRD INT 0..3600 0 (No Delay time in seconds before re-
Delay) enabling SerialNET mode after a failed
connection.
SPN String 96 chars NULL SerialNET Phone Number to wake-up
SerialNET Server.
SDT Byte 0..255 20 SerialNET Dial Timeout. When waking
up a SerialNET server, iChip will
hangup after SDT seconds have elapsed.
SWT INT 0..65535 600 SerialNET Wake-up Timeout. Number
of seconds to allow for the SerialNET
server wake-up procedure.
PTD INT 0..65535 0 (No Specifies the number of Packets to Drop
Filter) during a SerialNET session.