AT+i Programmer's Manual - SE Spezial-Electronic AG
AT+i Programmer's Manual - SE Spezial-Electronic AG
AT+i Programmer's Manual - SE Spezial-Electronic AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
33 Nonvolatile Parameter Database<br />
33.1 Parameter Descriptions<br />
Nonvolatile Parameter Database<br />
Parameter Type Range Default Description<br />
Operational<br />
XRC Byte 0..4 4 Extended Return Code. Same as ATXn<br />
DMD Byte 0..2 0 Modem Dial Mode: ATD<br />
MIS String 126<br />
chars<br />
―AT&FE0V<br />
1X4Q0&D2<br />
M1L3\r‖<br />
m: Tone (0); Pulse (1); None (2)<br />
Modem initialization string. May<br />
contain several consecutive AT<br />
commands.<br />
MTYP Byte 0..11 0 Modem Type Designator<br />
WTC Byte 0..255 45 Wait Time Constant. Initialization<br />
constant for modem‘s S7 register.<br />
Defines a timeout constant for a variety<br />
of modem activities.<br />
TTO INT 0..3600 0 TCP Timeout. Number of seconds to<br />
wait before returning a timeout error on<br />
PGT Unsigned<br />
INT<br />
0-65535 0 [mSec]<br />
a TCP transaction.<br />
Timeout to resend a PING request.<br />
MPS Byte 0..3 0 (1500) Max PPP Packet Size.<br />
TTR INT 1000.. 3000 [mSec] Timeout to resend an unacknowledged<br />
65535<br />
TCP packet over PPP, in milliseconds.<br />
BDRF Byte 3..9|‗a‘| ‗a‘ (Auto) Sets the iChipHost to a fixed baud<br />
‗h‘<br />
rate.<br />
BDRM Byte 3..9|‗a‘| ‗a‘ (Auto) Sets the iChipmodem baud rate to a<br />
‗h‘<br />
fixed baud.<br />
AWS Byte 0..3 0 Sets flag to define web server<br />
activation. 0 (web server disabled),<br />
1 | 2 | 3(web server enabled).<br />
LATI INT 0-65535 0 (Disabled) Remote <strong>AT+i</strong> Service, port number.<br />
FLW Byte 0..7 0 (S/W) Flow Control Mode<br />
CPF Byte 0..1 1 (LAN) Sets Communication Platform:<br />
Modem (0); LAN (1).<br />
P<strong>SE</strong> Byte 0..255 0 (Disabled) Sets Power Save Mode:<br />
Disabled(0); idle time in seconds<br />
before activating Power Save mode<br />
(1..255)<br />
SDM Byte 0..7 0 (All Service Disable Bitmap<br />
Enabled)<br />
DF Byte 0..1 0 IP Protocol Don‘t Fragment Bit<br />
CKSM Byte 0..1 0 (Disabled) Sets checksum mode