44 (0)20 8337 7543 • Fax: + 44 (0 - Sillette-Sonic Ltd.

Suppliers & Manufacturers of OVER
• Propellers
• Sterngear
• Couplings
• Bearings
• Shafts
• Seals
2013
Marine
Propulsion
Systems
MARINE
PROPULSION
Tel: +44 (0)20 8337 7543 • Fax: +44 (0)20 8330 9014
Email: sales@sillette.co.uk
www.sillette.co.uk
2,000
PROPELLERS
IN STOCK

INDEX
Anodes 12
Brass Key Material 12
Brass Tube 12
Couplings R & D 15
Cuttless Bearings 4
Engine Mounts R & D 15
Fasteners & Fixings Misc. 13
Gori Propellers - see propellers 10 & 11
GRP Tube 12
Inboard Bearing Flexible glands 5
Inboard Bearing Rigid glands 5
Inboard Flange for PSS/Tides Seal etc. 5
Other Products 22
Outboard Bearing Water Scoop 5
P Brackets - Radice 5
Plant list 24
Prop Protector, Rope and Weed Cutter 18
Propeller Shafts 1
Propeller Sizing & Order Form 23
Propellers Fixed Blade Bronze - Radice 6 & 7
Propellers Folding 2 & 3 Blade - Gori 10 & 11
Propellers Folding 2 Blade - Radice 9
Propellers Saildrive 2 & 3 Blade Aluminium - Radice 8
Propellers Stern Drives 3 Blade Aluminium - Radice 8
P.S.S. Shaft Seals 17
R and D Marine Products 15
Radice Propellers - see propellers
Page No.
6 & 7 & 8 & 9
Rudders - Radice 14
Shaft Couplings 15
Shaft Logs - Radice 14
Shaft Nuts 13
Shaft Seal PSS 17
Shaft Seal - RMTA Radice 16
Shaft Seals - Tides Marine "Series One" 16
Steering Wheels 20 & 21
Stern Gland Lubricators 13
Stern Gland Packing 13
Stern Tube Complete Assemblies 2 & 3
Stern Tube Components 5
Teleflex Morse Controls 19
Tides Marine Shaft Seals 16
Yanmar Sail Drive Propeller Fastenings 13
Engineering Facilities 24
How to Contact Us
Inside Back Cover
How to Find Us
Back Cover
Payment Details
Inside Back Cover
Plant list 24
Terms and Conditions - Key points Inside Back Cover
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

Propeller Shafts
Our propeller shafts are manufactured from bright ground 316 grade stainless steel and can be supplied in
any metric or imperial size up to 3" or 50mm diameter. These shafts can be machined with either 1:10,
1:12 or 1:16 tapers. They are supplied with key, nut and split pin ready for installation. We can also
supply shafts in 304 grade stainless steel, and Duplex. 'The prices are for 316 grade shafts: 1:14 and 1:20
tapers are available with £20 net surcharge. Specify diameter 'd' overall length 'L' and taper requirements
when ordering.
IMPERIAL SHAFTS: Based on 3ft/ 914 mm overall length 'L', includes Key, BSF, Nut & Split Pin:
SHAFT Dimensions in inches
SINGLE EXTRA PER EXTRA FOR
dia 'd'
TAPER 6 Inches/152mm DOUBLE
1 IN 12 UP TO 10 ft O/A
TAPER
h i k
3/4" 1 3/4" 1" .188
£115.00
£8.50
£70.00
7/8" 1 7/8" 1" .188
£125.00
£11.00
£70.00
1" 2 1/8" 1 1/4" .250
£140.00
£17.00
£70.00
1 1/8" 2 3/8" 1 1/4" .250
£169.00
£19.00
£75.00
1 1/4" 3" 1 1/4" .313
£185.00
£23.00
£85.00
1 1/2" 3 1/8" 1 3/8" .375
£248.00
£33.00
£105.00
1 3/4" 4 1/4" 1 7/8" .438
£317.00
£46.00
£120.00
2" 4 7/8" 2 3/4" .500
£380.00
£60.00
£130.00
2 1/4" 5 1/4" 2 3/8" .625
£472.00
£75.00
£150.00
2 1/2" 5 3/4" 2 3/4" .625
£POA
£POA
£POA
2 3/4" 6 3/4" 2 3/4" .750
£POA
£POA
£POA
3" 7 3/4" 2 3/4" .750
£POA
£POA
£POA
METRIC SHAFTS: Based on 1000 mm overall length'L'. Includes Key, Metric Nut and Split Pin
SHAFT Dimensions in mm
SINGLE EXTRA PER EXTRA FOR
dia 'd'
TAPER 15O mm DOUBLE
h i k
1 IN 10
TAPER
20mm 45 25 6
£120.00
£10.00
£70.00
22mm 47 25 6
£135.00
£14.00
£70.00
25mm 55 25 6
£143.00
£15.00
£70.00
30mm 75 30 8
£182.00
£21.00
£85.00
35mm 85 35 10
£215.00
£29.00
£100.00
40mm 95 35 12
£256.00
£37.00
£110.00
45mm 105 40 14
£320.00
£50.00
£120.00
50mm 115 45 14
£370.00
£60.00
£130.00
Cost of keying parallel shaft and supply parallel key 3/4"/20mm to 1 1/2"/35mm. Shaft dia - extra £35.00
Fitting a 1/2 coupling is extra.
1 3/4"/40mm to 2"/50mm. Shaft dia - extra £50.00
The above prices are for shafts up to 3 mtrs/10 ft: Longer lengths subject to individual quotation, as are,
different tapers and special requirements. Sizes and specifications may vary, surcharges may apply,
check when ordering.
DUPLEX STAINLESS is also available giving 30% increase in tensile strength over 316,
Available in 1", 1 1/4", 1 1/2", 1 3/4" & 2" diameter, add 15% to above prices.
Metric sizes may be available check when ordering.
Enables smaller sterngear to be fitted,
in some cases, with cost
saving overall.
Boxes can be supplied for transit/export on request.
Mild steel intermediate shafts are available to customer specifications.
Note All above prices are based on current costs, these may be amended in the case of escalating
material prices, please check before ordering.
POA = Price on application.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
1

2
HOW TO ORDER YOUR STERN TUBE ASSEMBLY
1. Select the stern tube assembly from types 1, 3, 4 & 5.
2. Specify shaft diameter ‘d’.
3. Specify length ‘B’.
4. Specify length ‘A’ if different to standard, see table on page 3.
5. Specify PSS seal, Tides Marine seal or traditional type gland as drawn below.
Please note dimensions C, C1 and C2 are for guidance only and relate to traditional type gland.
See page 17 for PSS seal dimensions.
TYPE 1
Water scoop outboard bearing,
brass tube, fixed flange inboard,
nut type traditional gland.
(Stud type over 1 3/8” 135mm)
TYPE 3
Water scoop outboard
bearing, brass tube, inboard
mounting flange, flexible inboard
bearing, nut type traditional gland.
PSS seal or Tides Marine seal
(Stud type over 1 3/8” 135mm)
TYPE 4
Plain Epoxy Glass tube & flexible
nut type traditional gland or PSS
seal or Tides Marine seal.
(Stud type over 1 3/8” 135mm)
‘P’ Strut and cutless bearing
(see separate listing for further
detail) can be used with ‘A’
bracket etc.
TYPE 5
Epoxy Glass tube with cutless
bearing outboard, flexible inboard
bearing and nut type traditional
gland or PSS seal or Tides
Marine seal.
(Stud type over 1 3/8” 35mm)
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

STERN TUBE ASSEMBLIES
Lake stern tube assemblies are available to suit shafts from 7/8"/22mm to 1 3/4"/45mm diameter, listed below
are sizes to 1 3/4"/45mm. Larger sizes quoted against specific enquiry. Stern and gland bearing housings are
cast in gunmetal to ensure good corrosion resistance; and come complete with cutless bearings and gland
packing. Length 'B' to suit your requirements. We also list options with PSS seal and Tides Marine Seal (further
detail within the catalogue) instead of the traditional style flexi stuffing gland inboard. Dimensions given below
are for guidance only and may vary. Confirm when ordering any critical dimension on your installation.
Customised sterngear quoted on receipt of detail.
TYPE 1
With traditional
type stuffing
'B' Dimension
gland
Extra
for Shaft 'B' Dimension at
per
diameter 'd' A C D E 12" - 305mm 12" - 305mm
7/8" 22 mm 4 1/2" 114 3 1/4" 84 1 1/2" 38 4" 102 £480.00
£30.00
1" 25 mm 5" 125 3 1/4" 84 1 1/2" 38 4" 102 £490.00
£30.00
1 1/8" 5 1/4" 135 3 1/4" 84 1 3/4" 45 4" 102 £510.00
£35.00
1 1/4". 1 3/8" 30/35 mm 6"/6 1/4" 150 3 1/2" 90 1 3/4" 45 4 1/2" 114 £540.00
£35.00
1 1/2" 40 mm 7 1/2" 188 3 1/2" 90 2" 51 5" 127 £730.00
£40.00
1 3/4" 45 mm 7 1/2" 188 3 1/2" 90 2 1/2" 64 5" 127 £770.00
£60.00
TYPE 3
With traditional PSS Tides
type stuffing Seal Marine 'B' Dimension
gland Option Seal Extra
for Shaft 'B' Dimension at 'B' Dimension
per
diameter 'd' A C2 D E 12" - 305mm 12" - 305 mm 12" - 305mm
7/8" 22 mm 4 1/2" 114 6 1/2" 165 1 1/2" 38 4" 102 £570.00 £610.00 £565.00 £30.00
1" 25 mm 5" 125 6 1/2" 165 1 1/2" 38 4" 102 £580.00 £615.00 £580.00 £30.00
1 1/8" 5 1/4" 135 6 1/2" 165 1 3/4" 45 4" 102 £595.00 £625.00 £590.00 £35.00
1 1/4". 1 3/8" 30/35 mm 6"/6 1/4" 150 7 1/2" 190 1 3/4"/2" 45 4 1/2" 114 £665.00 £695.00 £625.00 £35.00
1 1/2" 40 mm 7 1/2" 188 7 1/2" 190 2" 51 5" 127 £880.00 £870.00 £925.00 £40.00
1 3/4" 45 mm 7 1/2" 188 7 1/2" 190 2 1/2" 64 5" 127 £930.00 £910.00 £950.00 £60.00
TYPE 4
B Dim'n With traditional PSS Tides
Extra for type stuffing Seal Marine
25 to 48" gland Option Seal
for Shaft 611 to Dim'n 'B' up to 'B' Dimension 'P' Bracket
diameter 'd' C1 D F 1220 mm 24" - 610 mm up to 24" - 610 mm & cutless
7/8" 22 mm 4" 102 1 3/4" 44 10" 254 £30.00 £225.00 £270.00 £220.00 £215.00
1" 25 mm 4" 102 1 3/4" 44 15 3/4" 400 £30.00 £225.00 £270.00 £220.00 £220.00
1 1/8" 4" 102 2" 51 15 3/4" 400 £30.00 £245.00 £290.00 £240.00 £225.00
1 1/4" 30 mm 4 3/4" 122 2 1/4" 57 15 3/4" 400 £55.00 £300.00 £330.00 £260.00 £300.00
1 3/8" 35 mm 4 3/4" 122 2 1/2" 64 17 3/4" 450 £55.00 £320.00 £360.00 £450.00 £400.00
1 1/2" 40 mm 5 1/4" 135 2 1/2" 64 17 3/4" 450 £60.00 £450.00 £480.00 £480.00 £480.00
1 3/4" 45 mm 5 1/4" 135 3" 76 21 3/4" 450 £70.00 £490.00 £510.00 £520.00 £720.00
TYPE 5
B Dim'n With traditional PSS Tides
Extra for type stuffing Seal Marine
25 to 48" gland Option Seal
for Shaft 611 to Dim'n 'B' up to 'B' Dimension
diameter 'd' C1 D 1220 mm 24" - 610 mm up to 24" - 610 mm
7/8" 22 mm 4" 102 1 3/4" 44 £30.00 £290.00 £330.00 £275.00
1" 25 mm 4" 102 1 3/4" 44 £30.00 £290.00 £330.00 £275.00
1 1/8" 4" 102 2" 51 £30.00 £320.00 £350.00 £295.00
1 1/4" 30 mm 4 3/4" 122 2 1/4" 57 £55.00 £350.00 £390.00 £320.00
1 3/8" 35 mm 4 3/4" 122 2 1/2" 64 £55.00 £380.00 £420.00 £520.00
1 1/2" 40 mm 5 1/4" 135 2 1/2" 64 £60.00 £520.00 £495.00 £550.00
1 3/4" 45 mm 5 1/4" 135 3" 76 £70.00 £570.00 £520.00 £590.00
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
3

4
Marine Cutless Bearings
Imperial Sizes Metric Sizes
Shaft Shell Length Brass Non Metalic Shaft Shell Length Brass Non Metalic
Diameter Diameter Price Price Diameter Diameter Price Price
3/4" 1 1/4" 3" £30.00 £19.00 20mm 35mm 80mm £36.00 £23.00
7/8" 1 1/4" 3 1/2" £34.00 £22.00 22mm 35mm 88mm £36.00 £23.00
7/8" 1 3/8" 3 1/2" £36.00 £23.00 25mm 40mm 100mm £30.00 £21.00
7/8" 1 1/2" 3 1/2" £45.00 £24.00 30mm 40mm 120mm £39.00 £25.00
1" 1 1/4" 4" £30.00 £20.00 30mm 45mm 128mm £37.00 £32.00
1" 1 3/8" 4" £36.00 £23.00 35mm 50mm 140mm £42.00 £35.00
1" 1 1/2" 4" £31.00 £26.00 40mm 55mm 160mm £52.00 £39.00
1" 1 7/8" 4" - £33.00 45mm 65mm 180mm £71.00 £42.00
1 1/8" 1 1/2" 4 1/2" £46.00 £26.00 50mm 70mm 200mm £82.00 £61.00
1 1/8" 1 5/8" 4 1/2" £38.00 £24.00 55mm 75mm 220mm £97.00 £48.00
1 1/8" 1 3/4" 4 1/2" £44.00 £27.00 60mm 80mm 240mm £116.00 £54.00
1 1/8" 1 7/8" 4 1/2" - £44.00 65mm 85mm 260mm £133.00 £53.00
1 1/4" 1 3/4" 5" £36.00 £24.00 70mm 90mm 280mm £130.00 £80.00
1 1/4" 2" 5" £43.00 £25.00 75mm 95mm 300mm £165.00 £90.00
1 3/8" 1 7/8" 5 1/2" £47.00 £28.00
1 1/2" 2" 6" £47.00 £34.00
1 1/2" 2 1/8" 6" £60.00 £40.00
1 1/2" 2 3/8" 6" £73.00 £34.00
1 5/8" 2 1/8" 6 1/2" £72.00 £47.00
1 3/4" 2 3/8" 7" £69.00 £55.00
1 3/4" 2 5/8" 7" £72.00 £43.00
2" 2 5/8" 8" £75.00 £60.00
2" 2 3/4" 8" £100.00 £53.00
2" 3" 8" £96.00 £44.00
2 1/4" 3" 9" £98.00 £69.00
2 1/4" 3 1/8" 8" £117.00 £53.00
2 1/2" 3 1/8" 10" £120.00 £60.00
2 1/2" 3 1/4" 10" £120.00 £79.00
2 3/4" 3 1/2" 11" £136.00 £60.00
3" 3 3/4" 12" £171.00 £65.00
3" 4" 12" £188.00 £87.00
Metric shaft diameter, Imperial shell diameter Headed all rubber bearings
Shaft Shell Length Brass Non Metalic Shaft Housing Length Price
Diameter Diameter Price Price Diameter Diameter
20mm 1 1/4" 76mm £28.00 £20.00 22mm 29mm 75mm £20.00
22mm 1 1/4" 88mm £28.00 - 22mm 36mm 75mm £21.00
22mm 1 3/8" 88mm £40.00 £32.00 25mm 34mm 95mm £21.00
25mm 1 1/4" 100mm £34.00 £23.00 25mm 36mm 100mm £22.00
25mm 1 3/8" 100mm £36.00 £24.00 25mm 40mm 100mm £23.00
25mm 1 1/2" 100mm £30.00 £20.00 25mm 40mm 120mm £24.00
30mm 1 3/4" 120mm £36.00 £24.00 30mm 40mm 100mm £25.00
35mm 1 7/8" 140mm £39.00 £24.00 30mm 40mm 120mm £26.00
40mm 2 1/8" 165mm £53.00 £29.00 Shrimper, brass shell options - WM
45mm 2 3/8" 178mm £69.00 £42.00 Shaft Shell Length Price
50mm 2 5/8" 203mm £74.00 £44.00 Diameter Diameter
25mm 34mm 60mm £31.00
1" 34mm 60mm £31.00
Other sizes are available both in imperial and metric.
Detail and price on request.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

INBOARD FLANGE FOR PSS/TIDES SEAL ETC. To order, advise "d" and any special requirements
RIGID INBOARD GLAND
shaft range "d" inside dia. "C" as std. std. tube dia. "D" "E" std. bolt Std. Price
of your hose thread 12 t.p.i centres
7/8" to 1 1/8" 1 1/4" to 1 3/4" 3 3/8" 1 1/2" 4" £145.00
22mm to 28mm
1 1/4" to 1 1/8" 1 3/4" to 2 1/4" 3 1/2" 1 3/4" 4 1/2" £185.00
30mm to 35mm
1 1/2" to 1 3/4" 2 1/2 to 3 1/8" 2 5/8" 2" or 2 1/4" 4 holes 4 1/2" PCD £160.00
40mm to 45mm flat back round flange
To Order: for shaft "C" as std. std. tube dia. "D" "E" std. bolt Std. Price
Select shaft dia. dia. "d" thread 12 t.p.i centres
and any
non-standard 7/8" to 1" 3 1/4" 1 1/2" 4" £230.00
requirements 22mm to 25mm
1 1/8" to 1 3/8" 3 1/2" 1 3/4" 4" to 4 1/2" £270.00
28mm to 35mm
1 1/2" & 40mm 3 1/2" 2" 4 holes 4 1/2" PCD £350.00
round flange
1 3/4" & 45mm 3 1/2" 2 1/2" 4 holes 4 1/2" PCD £390.00
round flange
FLEXIBLE INBOARD GLAND with nut type gland (stud type over 1 3/8" / 35mm)
WATER SCOOP OUTBOARD BEARING (Cutless fitted)
GLASS-IN "P" BRACKETS
To Order for shaft approx "C" standard "D" Price
specify "d" dia. "d"
shaft dia. and
confirm "D" 3/4" / 20 5" / 127 1 1/4" / 32 - 2" / 51 £195.00
7/8" / 22 5" / 127 1 1/2" / 38 - 2" / 51 £195.00
1" / 25 5" / 127 1 1/2" / 38 - 2" / 51 £195.00
1 1/8" / 28 5" / 127 1 1/2" / 38 - 2" / 51 £205.00
1 1/4" / 30 1 3/8" /35 6" / 125 1 3/4" / 43 - 2 1/4" / 58 £245.00
1 1/2" / 40 7" / 178 2" / 51 - 2 1/2" / 64 £390.00
1 5/8" or 1 3/4" / 45 7" / 178 2" / 51 - 2 1/2" / 64 £450.00
special requirements can usually be accommodated
To Order for shaft standard std. tube dia. "D" "E" std. bolt Std. Price
specify "d" dia. "d" length "A" thread 12 t.p.i centres
shaft dia. and
see NOTE* 7/8" / 22 4 1/2" / 144 1 1/2" / 38 4" / 102 £240.00
1" / 25 5" / 125 1 1/2" / 38 4" / 102 £240.00
1 1/8" / 28 5 1/4" / 135 1 3/4" / 45 4" / 102 £250.00
1 1/4" / 30 - 1 3/8" 35 6" / 150 1 3/4" / 45 4 1/2" / 114 £260.00
1 1/2" / 40 7" / 178 22 / 51 5" / 127 £370.00
1 5/8" or 1 3/4" / 45 7 1/2" 188 2 1/4" / 57 5" / 127 £390.00
Stuart copy casting option - used as inboard flange £145.00 / used as outboard bearing housing with cutless £220.00
NOTE* Please advise us of any non-standard requirements which we will endeavour to accomodate
for shaft length "J" Price
dia. "d"
3/4" / 20 10" / 250 £200.00
7/8" / 22 16" / 400 £215.00
1" / 25 16" / 400 £220.00
1 1/8" / 28 16" / 400 £225.00
1 1/4" / 30 16" / 400 £300.00
1 3/8" / 35 18" / 450 £400.00
1 1/2" / 40 18" / 450 £480.00
1 3/4" / 45 22" / 550 £720.00
2" / 50 22" / 550 £840.00
Note: All prices are based on current costs, these may be ammended in the case of escalating material prices, please check before ordering.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
5

6
H = 0.376 of Prop. Dia.
Propellers
E13 - 3 blade
B7 - 4 blade
H = 0.611 of Prop. Dia.
Propellers
D10 - 3 blade
RADICE BLADE PROFILES
ELICHE RADICE S.p.A.
complete Range
To calculate Blade Width where “D” is Diameter and “H” is Blade Width
H = D x factor shown against each blade type & propeller model
H = 0.311 of Prop. Dia.
Propellers
E12 - 3 blade
B6 - 4 blade
A3 - 5 blade
H = 0.423 of Prop. Dia.
Propellers
S8 - 4 blade
H = 0.436 of Prop. Dia.
Propellers
C7 - 3 blade
C8 - 4 blade
C9 - 5 blade
H = 0.352 of Prop. Dia.
Propellers
K3/50 - 3 blade
K4/67 - 4 blade
H = 0.376 of Prop. Dia.
Propellers
K11 - 2 blade
H = 0.306 of Prop. Dia.
Propellers
K3/42 - 3 blade
K4/56 - 4 blade
H = 0.430 of Prop. Dia.
Propellers
S9 - 5 blade
H = 0.250 of Prop. Dia.
Propellers
M12 - 2 blade
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

ELICHE RADICE S.p.A.
2 & 3 Blade Bronze Propellers
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
Diameter 2 BLADE SAILING 2 BLADE TURBINE 3 BLADE, FINE 3 BLADE STANDARD 3 BLADE EQUIPOISE
TYPE M12:0.23 TYPE K11:0.34 TYPE E12:0.43 TYPE E13:0.52 TYPE C7:0.55
10" 254mm - - - £215.00 -
11" 279mm - - - £215.00 -
12" 305mm £215.00 £215.00 £215.00 £225.00 -
13" 330mm £220.00 £220.00 £245.00 £265.00 -
14" 356mm £230.00 £230.00 £260.00 £275.00 -
15" 381mm £235.00 £235.00 £270.00 £280.00 -
16" 406mm £275.00 £275.00 £290.00 £310.00 £360.00
17" 432mm - £290.00 £310.00 £335.00 £380.00
18" 457mm - £315.00 £325.00 £360.00 £465.00
19" 483mm - - - £405.00 -
20" 508mm - - - £440.00 £550.00
21" 533mm - - - £545.00 -
22" 559mm - - - £680.00 £725.00
Propeller
Blade
Style
Prices include standard taper boring & keyslot 1 in 10, 1 in 12 & 1 in 16 only 1 in 14 & 1 in 20 £20 net surcharge.
Availalable in left & right hand & full range of popular pitches (pilot bore less £50 up to 17" and £60 above 17").
Sillette stock range M12 - 12" to 16" Dia: K11 - 12" to 18" Dia: E12 - 12" to 18" Dia in righthand
E13 - 10" to 22" Dia, C7 - 16" to 22" Dia: *Propellers may not be of Radice origin or specification.
Propeller material ot/man, specially formulated for Eliche Radice
It has good strength charactaristic and a good resistance to corrosion.
Copper 53/56% Manganese 1.8/2.4% Nickel 1.5/2.0%
Mechanical restistance R > 535 N/mm², yield strength > 220N/mm², elongation > 25%
In most cases it is not necessary to specify mibral (Nickel Aluminium Bronze) which would add 30% to above prices.
When ordering please specify following dimensions for bore & keyslot and confirm if they relate to propeller hub or shaft
for folding propellers also specify thread ie.¾" BSF - M16 x 1.5 pitch etc
Propellers correctly supplied to your order are not returnable.
The Radice Company, established in 1919 has always been one of the most advanced in designing and
manufacturing any type of propeller, from small outboard propellers to ship's propellers up to 4 mtr in diameter.
Due to their policy of continuous development, specification may change without prior notice, please check
when ordering. Prices subject to change without notice.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
7

8
For, ENFIELD 130, SONIC, PERKINS, TRANSADRIVE,
& VOLVO 80.88. Sterndrives
Stern Drive Propellers
Sail Drive Propellers
13" Dia x 8" PITCH, L OR R £140.00 14" Dia x 9" PITCH, L OR R £140.00
13" Dia x 9" PITCH, L OR R £140.00 14" Dia x 10" PITCH, L OR R £140.00
13" Dia x 10" PITCH, L OR R £140.00 14" Dia x 11" PITCH, L OR R £140.00
13" Dia x 11" PITCH, L OR R £140.00 14" Dia x 12" PITCH, L OR R £140.00
13" Dia x 12" PITCH, L OR R £140.00 14" Dia x 13" PITCH, L OR R £140.00
13" Dia x 13" PITCH, L OR R £140.00 14" Dia x 14" PITCH, L OR R £140.00
13" Dia x 14" PITCH, L OR R £140.00
All 3 blade Aluminium for .80"/20.5mm Dia 12 Spline involute prop shaft.
RETAINING CONE, TAB WASHER AND SPACER FOR ABOVE set £40
For, VOLVO AQUAMATIC 100 - 110 - Pin drive
14" DIAMETER, PITCHES 10", 11", 12", 13" & 14" L or R £175.00
For, ENFIELD 200, SONIC 250, TRANSADRIVE 220,
& VOLVO AQUAMATIC 200.250.270.280.
14" DIAMETER, PITCHES 9" TO 17" left or right hand rotation £185.00
15" DIAMETER, PITCHES 9" TO 17" left or right hand rotation £190.00
16" DIAMETER, PITCHES 12", 14", 16" & 18" left or right hand rotation £200.00
All 3 blade Aluminium for 1.100"/28mm Dia 17 Spline involute prop shaft, standard hub length
Retaining cone and Tab washer for above - Sillette type £40.00
Adaptor to convert 12 Spline Shafts to 17 Spline £70.00
For, BUKH, YANMAR, NANNI, VOLVO & SONIC.
Sail Drives, 2 Blade. 17 Spline. 28mm Shaft
14" DIAMETER, PITCHES 7", 8", 9" & 10" left hand rotation £180.00
15" DIAMETER, PITCHES 10", 11" & 13" left hand rotation £190.00
16" DIAMETER, PITCHES 11", 12" & 13" left hand rotation £195.00
17" DIAMETER, PITCHES 12" & 14" (15" subject to £15 surcharge) left hand rotation £210.00
18" DIAMETER, PITCH 10" & 12" left hand rotation £260.00
Sail Drives, 3 Blade. 17 Spline. 28mm Shaft
12" DIAMETER, PITCH 8" (BUKH DVIOLSME- 6 spline) right hand rotation £230.00
14" DIAMETER, PITCHES 9", 10", 11" & 12" left hand rotation £225.00
15" DIAMETER, PITCHES 11", 12" & 13" left hand rotation £235.00
16" DIAMETER, PITCHES 10" & 11" left hand rotation £240.00
17" DIAMETER, PITCHES 11", 12", 13", 14", 15" & 16" left hand rotation £265.00
18" DIAMETER, PITCHES 15" & 16" left hand rotation £325.00
LOMBARDINI / SELVA Sail Drive, 3 Blade
ELICHE RADICE S.p.A
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
14" DIAMETER, PITCHES 8", 9", 10", 11" & 12" right hand rotation £260.00
Cone Kit inc, tab washer and spacer for Yanmar, Sillette type, specify M16 or M20 £60.00
Spacer for Yanmar Saildrives, use with Sillette Cone & Tab Washer as spare part £25.00
Cone Kit with centre bolt Volvo type 850396 net only
£78.00
Radice propellers are pitch checked and balanced during manufacture, samples are also subjected to
destructive testing to ensure material consistency and correct functioning of the cushioned hub.
Reference to inch sizes in this price list is for Part No. identification purposes.
Propellers correctly supplied to order are not returnable.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

TAPER FITTING SHAFT PROPELLERS
2 Blade Folding Propellers
2 BLADE
Available for left or right hand rotation FOLDING
Bored & keywayed to standard 1:10, 1:12 or 1:16 tapers. (1:14 and 1:20 £20 net extra)
For use with propeller shaft diameters, 19 to 25 mm - 3/4" to 1"
12" Diameter x pitches 8" or 10" £490.00
13" Diameter x pitches 7", 8", 9" 10" or 11" £435.00
For use with propeller shaft diameters 22 to 25 mm 7/8 to 1"
14" Diameter x pitches 8", 9", 10" or 11" £500.00
15" Diameter x pitches 9", 10", 11", 12" or 13" £515.00
For use with propeller shaft diameters 25 to 35 mm - 1" to 1 3/8"
16" Diameter x pitches 10", 11", 12" or 13" £560.00
17" Diameter x pitches 10", 11", 12", 13" or 14" £615.00
For use with propeller shaft diameters. 30 to 40mm - 1 1/8" to 1 1/2"
18" Diameter x pitches 12", 13" or 14" £690.00
Pilot bored less £60 on above prices
Non standards tapers subject to individual quotation
Pitch availability quoted is for 2 blade.
SPLINE FITTING SAILDRIVE PROPELLERS
For Volvo 110's, Volvo 120's, Yanmar, Bukh, Nanni & Sonic Saildrives
13" Diameter x pitch 7", 8" or 9" Left hand £460.00
14" Diameter x pitch 7", 8", 9" or 10" Left hand £510.00
15" Diameter x pitch 9", 10", 11", 12" or 13" Left hand £525.00
16" Diameter x pitch 10", 11" or 13" Left hand £550.00
17" Diameter x pitch 10" or 13" Left hand £610.00
18" Diameter x pitch 11" or 12" Left hand £670.00
19" Diameter x pitch 12" Left hand £745.00
SPLINE FITTING SAILDRIVE PROPELLERS, for Lombardini-Selva
14" Diameter x pitch 8", 9" or 10" Right hand £520.00
15" Diameter x pitch 9", 10", 11" or 12" Right hand £530.00
16" Diameter x pitch 10", 11", 12" or 13" Right hand £550.00
For pitch and diameter recommendations forward full detail engine, reduction ratio and hull.
All reference to inch sizes on this list is for part identification purposes.
SPARE PARTS
Pivot pin retaining screw M8 x 30 or 35 (Grani Inox 01/4453/2D) £6.00
Nut side locking screw M8 x 16 (Grani Inox 5927) £1.50
Pivot pin L64 D14mm (Perni Inox 01/4497/4) £8.00
Nut, special nyloc SD M16 (Ogiva Fol 01606/078) £7.00
Nut, shaft propellers std type tapped as required £45.00
Nut, new SD type M16 £45.00
Spare blades 60% of propeller costs
Taper Shaft hub including boring £260.00
Yanmar, Volvo, Bukh SailDrive hub £290.00
Propeller extractor for tapered shaft 2BL Small £28.00 Large £37.00
Propellers & spare parts correctly supplied to your order are not returnable.
ELICHE RADICE S.p.A.
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
9

10
Standard Shaft Propellers, 2 Blade folding
Available for left or right hand rotation, except where shown.
Bored and keywayed to standard 1:10, 1:12 or 1:16 - Non standard tapers subject to individual quotation.
QUALITY
FOLDING
PROPELLERS
11 1/2" Diameter x 8" Pitch (9 1/2" Pitch in RH only) £595.00
12 1/2" Diameter x 8" Pitch RH Only £605.00
13" Diameter x 9" Pitch £615.00
14" Diameter x 9 1/2" Pitch £625.00
15" Diameter x 10" Pitch £640.00
15" Diameter x 12" Pitch £640.00
16 1/2" Diameter x 11" Pitch £690.00
16 1/2" Diameter x 13" Pitch £690.00
18" Diameter x 13" Pitch also 15" Pitch £745.00
PILOT BORED - LESS £60 ON ABOVE PRICES.
NON STANDARD TAPERS SUBJECT TO INDIVIDUAL QUOTATION.
CUSTOMISED DIAMETER & PITCH QUOTED ON REQUEST.
Standard Shaft Propellers, 3 Blade folding
SHAFT INSTALLATION
NEW - INTEGRATED HUB ANODE SUPPLIED AT NO EXTRA COST, SUBJECT TO REQUEST WHEN ORDERING
Bored and keywayed 1:10 - 1:12 - 1:16 - Non standard tapers subject to individual quotation.
14" Diameter x 9", 10", 11" or 12" Pitch RH/LH £1,800.00
15" Diameter x 9", 10", 11" or 12" Pitch RH/LH £1,800.00
16 1/2" Diameter x 10", 11", 12" or 13" Pitch RH/LH £1,880.00
18" Diameter x 11", 12", 13" or 14" Pitch RH/LH £2,300.00
20" Diameter x 12", 13", 14", 15" or 16" Pitch RH/LH £2,400.00
22" Diameter x 13", 14", 15", 16" or 17" Pitch RH/LH £3,000.00
24" Diameter x 15", 16", 17", 18" or 19" Pitch RH/LH £3,200.00
26" Diameter x 16", 17", 18", 19", 20" or 21" Pitch RH/LH £3,600.00
28" Diameter x 17", 18", 19", 20", 21" or 22" Pitch RH/LH £6,300.00
30" Diameter x 18", 19", 20", 21", 22", 23" or 24" Pitch RH/LH £6,600.00
Standard Shaft Propellers, 4 Blade folding NEW
SHAFT INSTALLATION
NEW - INTEGRATED HUB ANODE SUPPLIED AT NO EXTRA COST, SUBJECT TO REQUEST WHEN ORDERING
Bored and keywayed 1:10 - 1:12 - 1:16 - 1:20 - Non standard tapers subject to individual quotation.
22" Diameter x 13", 14", 15", 16" or 17" Pitch RH/LH P.O.A.
24" Diameter x 15", 16", 17", 18" or 19" Pitch RH/LH P.O.A.
26" Diameter x 16", 17", 18", 19", 20" or 21" Pitch RH/LH P.O.A.
28" Diameter x 17", 18", 19", 20", 21" or 22" Pitch RH/LH P.O.A.
30" Diameter x 18", 19", 20", 21", 22", 23" or 24" Pitch RH/LH P.O.A.
32" Diameter x 19", 20", 21", 22", 23", 24" or 25" Pitch RH/LH P.O.A.
34" Diameter x 20", 21", 22", 23", 24", 25" or 26" Pitch RH/LH P.O.A.
36" Diameter x 21", 22", 23", 24", 25", 26" or 27" Pitch RH/LH P.O.A.
38" Diameter x 23", 24", 25", 26", 27", 28", 29" or 30" Pitch RH/LH P.O.A.
Racing Series Propellers, 2 Blade folding
FOR HYDRODRIVE, SHAFT FITTING AND SAILDRIVE LH OR RH
375 Diameter for 30-40 ft - 3/4 tonner - 260 Pitch £1,220.00
380 Diameter for 30-40 ft - 3/4 tonner - 265 Pitch (LH only) £1,220.00
425 Diameter for 35-45 ft - 1 tonner - 300 Pitch £1,260.00
475 Diameter for 40-50 ft - 2 tonner - 330 Pitch £1,380.00
530 Diameter for 50 footer and Whitbread 60 - 370 Pitch £1,520.00
750 Diameter for Maxi Raters (also 680mm for Hydrodrive) RH P.O.A.
Actual propeller size depends on boat and engine installation, custom made propellers available.
For pitch and diameter recommendations, enter calculation details on Gori website.
www.gori-propeller.dk or complete, the Sillette order/enquiry form
P.O.A. - Price on application
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

Sail Drive Propellers, 2 Blade folding with cushioned hub
QUALITY
FOLDING
PROPELLERS
11 1/2" Diameter x 8" Pitch RH for Volvo 50S £670.00
11 1/2" Diameter x 8" Pitch RH for BUKH DV8SME £665.00
11 1/2" Diameter x 9 1/2" Pitch RH for BUKH DV10LSME £665.00
12" Diameter x 8" Pitch RH for BUKH DV10LSME £670.00
For VOLVO 110S, VOLVO 120S, YANMAR, BUKH, SONIC & LOMBARDINI - 17 spline.
For VOLVO 100S add £50 to the following prices. Propeller fits with 10-15mm gap.
13" Diameter x 9" Pitch - LH £785.00
14" Diameter x 9 1/2" Pitch - LH £800.00
15" Diameter x 10" Pitch - LH ALSO 11" & 12" Pitch £810.00
16 1/2" Diameter x 11" Pitch - LH ALSO 13" Pitch available £820.00
18" Diameter x 11" Pitch - LH £840.00
18" Diameter x 12" Pitch - LH £840.00
18" Diameter x 14" Pitch - LH £840.00
Sail Drive Propellers, 3 Blade folding with cushion hub
Standard 17 spline fitting with replaceable cushioned hub and anode protection.
For VOLVO, YANMAR, BUKH, SONIC & LOMBARDINI - 17 spline.
15" Diameter x 9", 10", 11" or 12" Pitch LH standard (RH optional) £1,850.00
16 1/2" Diameter x 10", 11", 12" or 13" Pitch LH standard (RH optional) £1,920.00
18" Diameter x 11", 12", 13" or 14" Pitch LH standard (RH optional) £2,350.00
20" Diameter x 12", 13", 14", 15" or 16" Pitch LH standard (RH optional) £2,470.00
Repairs and Spare Part Prices for 2 Blade Folding Propellers
Replacement blades for existing propeller - subject to availability 60% of propeller price
Replacement hub with standard bore - subject to availability 60% of propeller price
Replacement hub for saildrive propellers 60% of propeller price
Revulcanisation of existing saildrive hub (includes carriage to Denmark) £300.00
Pivot pin retaining screws M8 pointed £2.00
Pivot pins (specify size when ordering) (1 pair) £54.00
Split pin for Saildrive prop £2.00
Collar nut for Saildrive prop, new method - M16 or M20 x 2 mm pitch £54.00
Nut, Shaft Propellers Std. Type Tapped as required each £49.00
Nut, Shaft 3 Blade Propeller 18" - 20" £75.00
Propeller extractor from tapered shaft 2 bl Small, £28 Large, £37.00
Spare Part Prices for 3 Blade Folding Propellers - Shaft and saildrive types
Triangular Anode and Stops 15" - 16 1/2" - 3 BLADE £50.00
Triangular Anode and Stops 18" - 20" - 3 BLADE £50.00
Triangular Anode and Stops 22" - 26" - 3 BLADE £50.00
Triangular Anode and Stops 28" - 30" - 3 BLADE £76.00
Triangular Anode 15" - 16 1/2" - 3 BLADE £21.00
Triangular Anode 18" - 20" - 3 BLADE £21.00
Triangular Anode 22" - 26" - 3 BLADE £21.00
Triangular Anode 28" - 30" - 3 BLADE £29.00
Hub Anode 12 1/2" - 18" - 2 BLADE SAILDRIVE PROPELLER £45.00
Hub Anode 15" - 16 1/2" - 3 BLADE Specify saildrive or shaft propeller £45.00
Hub Anode 18" - 20" - 3 BLADE Specify saildrive or shaft propeller £45.00
Hub Anode 22" - 26" - 3 BLADE £58.00
Hub Anode 28" - 30" - 3 BLADE £71.00
All Anodes available in sets of 3, of same type, at stockholder discount price, (pay for 2 & receive 3)
Peek Bushes 15" - 20" - 3 Blade Saildrive Propeller each £40.00
Set Thrust Washers 15" - 26" 3 Blade set £25.00
Cushioned spline centre 15" - 20" - 3 BLADE SAILDRIVE PROPELLER, specify diameter £70.00
Hub extractor tool 15"/16 1/2" £45 18"/20" £55 22"/26" £71 28"/30" £82.00
C. spanner 15"/16 1/2" £26 18"/20" £34 22"/26" £53 28"/30" £71.00
Allen key set metric - ball end long series £18.00
NOTE All reference to inch sizes in the price list and various GORI MARINE brochures, is for part identification purposes,
although in most instances propeller sizes are identified by inch measurement, throughout the world.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
11

12
EPOXY GLASS TUBE Unmachined GRP tube in lengths of 4 ft / 1219 or less BRASS TUBE CZ121 or CZ126 depending on availability
Bore dia. Wall thick Price Outside dia. Wall Thickness Price per 300mm
NB. 2 ft lengths 1 1/4" / 32 1/4" / 6.4 £110.00 1 1/2" / 38 1/8" / 32.25 10 SWG £35.00
charged at 1 3/8" / 35 3/16" / 4.8 £95.00 1 3/4" / 45 1/8" / 32.25 10 SWG £40.00
65% of 4 ft 1 1/2" / 38 1/4" / 6.4 £140.00 2" / 51 1/8" / 32.25 10 SWG £50.00
price up to 1 3/4" / 45 1/4" / 6.4 £155.00 2 1/2" / 64 1/8" / 32.25 10 SWG £70.00
1 3/4" bore 2" / 51 1/4" / 6.4 £180.00
2 1/4" / 57 1/4" / 6.4 £195.00 per 1ft / 300mm sawn to length & unmachined
2 1/2" / 64 1/4" / 6.4 £215.00 or with standard thread each end add £45.00
BRASS KEY MATERIAL for propeller shafts, cut lengths
Square Price per 300mm Square Price per 300mm
3/16" £11.00 5mm £13.00
1/4" £13.00 6mm £14.00
5/16" £15.00 8mm £15.00
3/8" £17.00 10mm £20.00
7/16" £20.00 12mm £26.00
1/2" £21.00
For short key with rounded ends to fit tapered portion of propeller shaft take price as for 300mm cut length, and specify length you require.
STERN GLAND HOSE specifically for use with sterngear, oil & grease resistant, wall thickness between 8 and 10mm
Inside dia. Price per 100mm Inside dia. Price per 100mm
Available 1 1/4" / 32 £13.00 2" / 51 £23.00
in 1 3/8" / 35 £14.00 2 1/8" / 54 £24.00
these 1 1/2" / 38 £15.00 2 1/4" / 57 £28.00
sizes 1 5/8" / 41 £19.00 2 3/8" / 60 £30.00
1 3/4" / 45 £21.00 2 1/2" / 64 £31.00
1 7/8" / 48 £22.00 2 3/4" / 70 £36.00
ZINC COLLAR ANODE for limited shaft space STERNDRIVE ANODES - ZINC
Price Price
shaft dia 20mm £10.00
shaft dia 22mm £10.00
shaft dia 25mm £10.00
shaft dia 30mm £12.00
Volvo 250/270/275 £14.00
shaft dia 3/4" £9.00 Volvo 280 £20.00
shaft dia 7/8" £10.00 Enfield 130 Ring Anode £14.00
shaft dia 1" £10.00 Enfield 130 Block Anode £7.00
shaft dia 1 1/8" £12.00 Sonic Sterndrive Ring Anode £12.00
shaft dia 1 1/4" £13.00 Sonic Sterndrive Block Anode £6.00
ZINC SUPER SHAFT ANODES for use adjacent 'P' Brackets MAGNESIUM AND ZINC
shaft dia 3/4" (19mm) £24.00
shaft dia 7/8" (22mm) £24.00
shaft dia 25mm £26.00
shaft dia 1" £26.00
shaft dia 1 1/8" (28mm) £29.00
shaft dia 30mm £30.00
shaft dia 1 1/4" (31.7mm) £26.00
shaft dia 1 3/8" (35mm) £30.00
shaft dia 1 1/2" (38mm) £33.00
shaft dia 40mm £40.00
shaft dia 1 3/4" (44.4mm) £69.00 Cavitation Plate Anode Zinc £15.00
shaft dia 2" (50mm) £70.00 Cavitation Plate Anode Magnesium £15.00
ZINC SHAFT BARREL ANODE for general use SAILDRIVE ANODES - ZINC
shaft dia 3/4" (19mm) £10.00
shaft dia 7/8" (22mm) £10.00
shaft dia 25mm £10.00
shaft dia 1" £10.00
shaft dia 1 1/8" (28mm) £10.00
shaft dia 30mm £10.00
shaft dia 1 1/4" (31.7mm) £10.00
shaft dia 1 3/8" (35mm) £13.00
shaft dia 1 1/2" (38mm) £14.00
shaft dia 40mm £24.00
shaft dia 1 3/4" (44.4mm) £24.00 Volvo 110 Saildrive £18.00
shaft dia 45mm £24.00 Volvo 120 Saildrive £18.00
shaft dia 2" (50mm) £25.00 Yanmar SD20//30/40/50 - Kit £35.00
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

REMOTE SCREW DOWN LUBRICATOR
Screw down type, all brass lubricator for stern tubes, rudder
bearings etc. Suitable for either vertical or horizontal mounting
Capacity 5 fl.oz
Dimensions: Base width 3 1/8" (80mm). Projection 2 3/4" (70mm)
Base height 1" (25mm). Outlet at base front 1/8" BSP threaded
Price
Overall height extended 11" (288mm). Closed 7" (178mm) Lubricator only £49.00
LUBRICATOR KIT (Parts only)
Consisting of 2 x 1/8 BSP connectors, 1 x 1/4 BSP connector
and 3m nylon hose in polythene bag. Kit only £12.00
GREASE CUPS - Stauffors' type grease cups in hot stamped brass.
Type Male B.S.P. O.A. Dia Max Height (approx)
1 1/8" 29mm 40mm £8.00
4 1/4" 40mm 42mm £8.00
GREASE - Water resistant for sterngear etc. 500gm tub £5.00
STERN GLAND PACKING, manufactured from finest quality flax yarn blend.
Square
Price per metre
Available 1/8" / 3 £10.00
in 3/16" / 5 £12.00
these 1/4" / 6.5 £13.00
sizes 5/16" / 8 £15.00
3/8" / 9.5 £17.00
1/2" / 12.5 £20.00
SHAFT NUTS
Shaft nut with anode and tabwasher M16 x 1.5. Shaft size 25mm & 22mm £26.00
Shaft nut with anode and tabwasher M20 x 1.5. Shaft size 30mm £30.00
Shaft nut with anode and tabwasher M24 x 2. Shaft size 35mm £33.00
Shaft nut with anode and tabwasher M24 x 2. Shaft size 40mm £36.00
Shaft nut with anode and tabwasher M30 x 2. Shaft size 45mm £41.00
Shaft nut with anode and tabwasher M36 x 2 Shaft size 50mm £76.00
Spare anode for M16 or M20 nut £10.00
Spare anode for M24 nut. (Specify shaft size) £12.00
Spare anode for M30 nut £15.00 for M36 nut £21.00
Spare tabwasher for M16, M20 & M24 nut £4.00
Spare tabwasher for M30 & M36 nut £6.00
Slotted brass nuts 1/2", 5/8", 3/4" BSF, M16 x 1.5, M20 x 1.5, 7/8" BSF £10.00
Slotted brass nuts M24, 3/4", 1" BSF/WHIT/UNIFIED £15.00
Slotted brass nuts M30, 1 1/8", BSF/WHIT/UNIFIED £32.00
M36, 1 1/4" BSF/WHIT/UNIFIED £42.00
M42, 45, 1 1/2", 1 3/4" BSF/WHIT/UNIFIED £48.00
SPLIT PINS ø1/8" £1.00 ø3/16" £2.50 ø1/4" £3.00
GRUB SCREWS ST STL Socket set screw type
M6 x 6, 12, 16 or 20 long £1.00
M8 x 12, 16, or 25 long £1.00
5/16" unc x 3/8 or 3/4" long £1.00
HT M8 x 12 or 1/4" unc x 3/8 " long £1.50
HI - GRIP HOSE CLIP (Stainless)
ø40 - £2.20 ø50 - £2.50 ø60 - £2.80 ø70 - £3.00 ø80 £3.30
STUD 1/2" WHIT x 3" LONG BRASS - £12.00 1/2" whit brass nut £1.75
COACH SCREWS, Stainless Steel ø8 x 70 £2.00
ø10 x 80 £2.50
YANMAR SAIL DRIVE, propeller fastenings.
Please specify saildrive type ie SD20, SD31, SD31, SD40 or SD50 when ordering
Nose cone, tab washer & 8mm spacer, prefered method for fixed blade props (14mm for SD40 & 50) £60.00
Nose cone kit with centre bolt, optional method for fixed blade props nett £78.00
Yanmar style saildrive nut and locking bolt £45.00
Spare tab washer 17 spline (for prefered nose cone system) £4.00
Spare 8mm spacer (for prefered nose cone system) £25.00
Spare 10mm spacer (Yanmar standard SD20, SD30 or SD31)) £25.00
Spare 16mm spacer (Yanmar standard SD40) or 14 mm for cone system £25.00
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
13

14
®
Type 16/17-S.0° Weight 15 Kg
RUDDERS
ELICHE RADICE S.p.A.
EUROPES LARGEST VOLUME PROPELLER MANUFACTURER
Type 16/17-P Weight 12 Kg
Light Duty
Series Price
12 6 V £430.00
12 6 P £430.00
16 7 P £630.00
16 7 V £630.00
16 7 S 0 £680.00
16 7 S 12 £680.00
14 10 P £690.00
14 10 V £690.00
14 10 V 10 £690.00
14 10 S 0 £745.00
14 10 S 12 £745.00
16 11 P £755.00
16 11 V £755.00
16 11 S 0 £800.00
16 11 S 12 £800.00
25 11 P&V £1050.00
16 13 P £945.00
16 13 V £945.00
16 13 S 0 £995.00
16 13 S 12 £995.00
45 16 P £2400.00
45 16 V £2400.00
45 19 P £2460.00
45 19 V £2460.00
4520 P £2460.00
4520 V £2460.00
5018 P £3860.00
SHAFT LOGS
With flexi inboard gland
A ANGLE B C D E F G H Price
25 - 30 1” - 1 1/4” 9° - 17° 460 90 20 48 77 45 5 £260.00
35 - 40 1 3/8” - 1 1/2” 11° - 17° 500 110 27 60 86 75 5 £370.00
45 - 50 2” 11° - 15° 555 130 35 66 103 75 5 £420.00
55 - 60 10° - 15° 730 190 57 85 230 70 8 £1890.00
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

R and D Flexible Shaft Couplings
Flexible For Gearbox Diameter No. Coupling Price
Coupling Bolts Capacity £
HP/100rpm
910-001 Borg Warner, PRM, Hurth,Technodrive 4" 4 5 £56.00
910-002 Yanmar 4" 4 3 £56.00
910-003 Borg Warner, PRM, MPM, Twin Disc 5 3/4" 6 20 £152.00
910-004 Borg Warner, PRM, Hurth 4" 4 8 £71.00
910-005 Paragon 4" 4 7 £71.00
910-006 Twin Disc, MPM 5 3/4" 6 20 £179.00
910-007 Volvo 4" 4 3 £56.00
910-009 Borg Warner, PRM, Hurth, Volvo 5" 4 13 £106.00
910-012 Yanmar 5" 4 10 £106.00
910-013 Bukh 90mm 4 3 £56.00
910-014 Borg Warner, PRM, Hurth, Technodrive 4" 4 3 £56.00
910-015 Self change 350HD 8 3/4" 6 43 £353.00
910-016 Self change 700HD 10 1/4" 6 65 £532.00
910-017 Twin Disc 7 1/4" 6 40 £364.00
910-018 PRM 7 1/4" 6 40 £364.00
910-019 Volvo 4" 4 3 £56.00
910-020 Volvo 4" 4 5 £56.00
910-021 Enfield, Sonic 4" 2 2.5 £61.00
910-022 Twin Disc 9" 8 65 £532.00
910-024 Twin Disc 10 1/2" 8 85 £667.00
910-025 Borg Warner, PRM, MPM, Twin Disc 5 3/4" 6 28 £204.00
910-026 Twin Disc, MPM 5 3/4" 6 28 £236.00
910-029 Borg Warner, Hurth, Volvo 5" 4 20 £176.00
910-030 120 hp 11 1/2" 8 120 £1,034.00
900-003 Lister 4 3/4" 6 10 £138.00
Shaft Half Coupling
SOLID TYPE - Specify 'd' diameter
4" for B.W. Hurth, PRM Bored & Keyed £94.00
5" for B.W. Hurth, PRM (Taper) Bored & Keyed £147.00
6" for PRM (Taper) Bored & Keyed £210.00
CLAMP ON
SPLIT TYPE - Specify 'd' diameter
4" for B.W. Hurth, PRM, Yanmar Bored, 25mm, 3/4" or 1" £67.00
5" for B.W. Hurth, PRM, Yanmar Bored, 1 1/4" £95.00
4" for B.W. Hurth, PRM, Yanmar Bored other than above £83.00
5" for B.W. Hurth, PRM, Yanmar Bored other than above £115.00
6" for P.R.M. Bored £154.00
4" Volvo type Bored £83.00
4" Yanmar type Bored £83.00
Keyslot above split type extra £23.00 nett
Non standard bores extra £27.00 nett
Earthing Connections, consist of a
silver impregnated rubber strip, which when fitted through
the axis of the coupling between the two failsafe straps
gives electrical continuity.
Part No Size (mm) to suit coupling
103-037 11 x 57 910-001, 002, 007
013, 014, 019 & 020 £15.00
103-039 17 x 57 910-003, 006, 009 £17.00
103-041 23 x 57 910-029 £18.00
Engine Mountings, medium, 800-036
300 lbs/140 kg capacity .04"/1mm deflection £24.00
small 800-040
90 lbs/41 kg capacity .14"/3.5mm deflection £27.00
small 800-041
200 lbs/91 kg capacity .14"/3.5mm deflection £27.00
(All 5/8" stud and 4" bolt down ctrs, 2" to 4" height adjustment)
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
15

"SERIESONE" SHAFT SEAL
The simple, no maintenance, easy to fit shaft seal.
• ELIMINATES GLAND PACKING AND GREASING
• ALL YOU NEED IS A SCREWDRIVER TO FIT AND FORGET
SERIESONE SHAFT SEAL, consists of a convoluted connecting hose, 4 stainless hoseclips and a one
piece composite body with lip seal fitted. All for less than the price of an "old fashioned" packing seal
"SURESEAL" Available for larger shaft diameters
Imperial
Shaft Dia Hose sizes Price
3/4" 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.00
7/8" 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.00
1" 1 5/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2" £142.00
1 1/8" 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4" £156.00
1 1/4"
Metric
1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3" £156.00
Shaft Dia Hose sizes Price
22mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4" £142.00
25mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2" £142.00
30mm 1 1/2", 1 5/8", 1 3/4", 2", 2 1/4", 2 1/2", 2 3/4", 3" £156.00
To order
We need to know the shaft diameter and the outside diameter of the stern tube.
Please discuss the installation with us, when ordering.
OPTIONAL EXTRA
3/8" Raw water hose, clips and Tee Fitting (specify 3/8", 1/2", 5/8" or 3/4" Tee fitting) £28.00
AN ALTERNATIVE TO THE VOLVO SEAL
Grease lubricated and Water fed.
Metric
Shaft Dia. Hose Sizes
25mm
39,42mm
30mm
45,48mm
35mm
48,54mm
40mm
Imperial
54,60mm
1 inch 42mm
1 1/4 inch 45.48mm
16
RMTA SHAFT SEAL ELICHE RADICE S.p.A
Length Price
111mm £56.00
116mm £62.00
123mm £78.00
129mm £103.00
111mm £56.00
116mm £62.00
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

Features:
• Dripless operation
• Maintenance free
• Eliminates shaft wear
• No mess or corrosion
• 3 year guarantee
• ABS approved
• Over 100,000 in successful operation
• Suitable for leisure & commercial craft
• Unaffected by engine movement or
vibration
• Metric & imperial sizes for shafts from
20mm - 3/4” to 100mm - 4”
• The carbon/graphite flanges & rotor should
never need replacing under normal
operating conditions
PSS SHAFT SEALS
The PSS Shaft Seal uses the highest quality materials and
manufacturing procedures to give a drip free performance with zero
wear to the propeller shaft and the capability of operating safely up to
500° F.
They require no lubrication other than the water they are working in.
A fitting is provided on the carbon flange to accept a feed from the
engine’s water exhaust to assist cooling.
Technical Specifications:
High Density Carbon Graphite Flange
Once installed and operational the carbon/graphite face will polish the
stainless steel rotor during the initial first few minutes of operation ensuring a
perfect fit thus eliminating any drips or spray.
The ultra dense carbon/graphite composite has a maximum operating
temperature of 500°F, guarding against failure by over heating as can occur
on rubber and plastic based seals.
Stainless Steel Rotor
The one-piece, 316 grade stainless steel rotor is secured to the propeller
shaft with double set screws.
The twin nitrile ‘O’ rings are stationary and do not wear.
Reinforced Bellows
The heavy reinforced nitrile bellows are resistant to petroleum based
products and retain their preset dimensions.
They provide the best combination of durability, strength and elasticity.
The Principle
The seal is created by contact of the
carbon face against the rotating stainless
steel rotor. A hydrodynamic bead of water
between the carbon seal and rotor
provides lubrication. The carbon seal and
rotor provides lubrication. The carbon
seal and bellows assembly is fitted to the
stern tube by twin stainless hose clamps.
Contact with the rotor is assisted by water
pressure which helps to cool the
assembly. Seal contact is unaffected by
engine laterally or fore and aft.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
17

18
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

Teleflex Morse Controls
from the UK’s Major Stockist
based in London and Poole
For further details refer
to our dedicated
Teleflex Morse Catalogue
Hydraulic Steering
Systems also available
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
Jan 2013
19

20
STEERING WHEELS
SAVORETTI ARMANDO
TRADITIONAL WHEEL WITH BRASS FACING RING TRADITIONAL WHEEL WITH WOODEN RIM
TYPE 1 Sizes cm 37/15" 37/15" £110.00 TYPE 3B Sizes cm 46/18" 46/18" £195.00
cm 42/16" £120.00 cm 55/22" £230.00
cm 52/20" £165.00
cm 60/24" £205.00
TRADITIONAL WOODEN WHEEL CHARACTER WHEEL STAINLESS & WOOD
TYPE 2 Sizes cm 42/16" £100.00 TYPE 11 Sizes cm 50/20" £165.00
cm 52/20" £135.00 cm 60/24" £215.00
cm 60/24" £170.00
TRADITIONAL WHEEL WITH STAINLESS HOOP DISHED WHEEL STAINLESS & WOOD
TYPE 3 Sizes cm 42/16" £200.00 TYPE 9L Sizes cm 35/14" £125.00
cm 52/20" £260.00 cm 40/16" £160.00
cm 60/24" £300.00
DISCOUNT ON RETAIL PRICES WHILE STOCKS LAST
PRICES SUBJECT TO FLUCTUATION
All prices listed are subject to UK VAT. Carriage and packing extra.
Jan 2013
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

STEERING WHEELS
SAVORETTI ARMANDO
STAINLESS STEEL DISHED WHEEL
STAINLESS STEEL SLIGHTLY DISHED WHEEL
TYPE 4 Sizes cm 37/15" £63.00 TYPE 5B Size cm 42/16" £74.00
cm 40/16" £70.00
cm 45/18" £85.00
STAINLESS STEEL DISHED WHEEL (ECONOMY) STAINLESS /POLYURATHANE DISHED WHEELS
TYPE 4B Sizes cm 32/13" £56.00 TYPE 10 (ECONOMY) Sizes cm 34/13" £63.00
cm 35/14" £58.00 TYPE 9 SMALL cm 35/14" £53.00
cm 40/16" £63.00 as illustrated cm 40/16" £63.00
grey or black
STAINLESS STEEL WHEEL, WOOD RIM STAINLESS/POLYURATHANE FLAT WHEEL
TYPE 4C Size cm 35/14" £115.00 TYPE 9 LARGE Sizes cm 45/18" £126.00
grey or 55/22" £145.00
black 70/28" £230.00
STAINLESS STEEL FLAT DESTROYER WHEEL FOLD FLAT HANDLE £42.00
TYPE 5 Sizes cm 50/20" £150.00 FIXED REVOLVING HANDLE £32.00
cm 60/24" £195.00 CLAMP ON HANDLE £63.00
cm 70/28" £225.00
cm 80/32" £310.00
GENERAL
DISCOUNT ON RETAIL PRICES WHILE STOCKS LAST
PRICES SUBJECT TO FLUCTUATION
All wheels have taper bore to suit Morse & Ultra flex helms.
Both wooden traditional wheels overleaf have brass hubs.
Number of spokes varies according to size. Sketches for
guidance only. Size and converted sizes are approximate
only.
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
21

22
OTHER PRODUCTS AND SERVICES
HYDRODRIVE:
Strut drives - for competition racing yachts.
SONIC PROPULSION SYSTEMS:
Sterndrives, Saildrives, Catamaran drives
and Bow Thrusters.
AGENTS FOR ELICHE RADICE S.p.A.
Sterngear manufactured with service in mind.
MARINE DIESEL ENGINES
From 9HP to 400HP plus.
Diesel Outboards, Saildrives and Onboard
generating sets.
MARINE DIESEL ENGINES
From 9HP to 200HP.
Saildrives and Onboard generating sets.
WATER PUMPS
Impellers and spare parts.
ENFIELD Z DRIVE
Spare parts and service.
STERNDRIVE
Spare parts and service.
ENGINE ROOM FITTING OUT EQUIPMENT
Fuel, water, electrical and exhaust systems.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

ORDER / ENQUIRY form for new or replacement propeller
Please remember that any incorrect information you supply is likely to result in an incorrect propeller being
specified, for which we cannot be responsible. Remember to advise us if you have a saildrive.
Any size we advise is an opinion only and subject to trials and developments at the purchasers cost.
Please advise any restrictions to good water flow around the propeller. i.e. behind a wide keel, in an
aperture, shaft to one side of keel, etc. and any factors limiting diameter, by specifying dimension from
centre line of the propeller shaft at the point where the propeller fits, to the under side of the hull, or closest
point of the aperture.
For folding propellers, please advise distance available astern from large end of taper. When rudder is fitted
close to propeller, or in an aperture.
Name: ........................................................................... Telephone: ....................................................
Address: ........................................................................ Fax: ...............................................................
...................................................................................... E-mail: ...........................................................
Type of propeller required: ........................................... Date: .............................................................
Sailboat Displacement Half planing Planing
Waterline length ........................................................ Beam .......................... Draft .....................
Displacement ............................................................ Displacement w/full tanks ...................................
Previously recorded top speed ..............................… Number of engines .............................................
Engine Data:
Manufacturer ............................................................. Type ........................... Year .....................
Horsepower ..............................................................
Reduction in gearbox ...............................................
Max. RPM ...........................................................
Present propeller
Diameter ......................... Pitch ................................ Number of blades ...............................................
Max. RPM with present propeller .............................. Max. Speed ........................................................
Direction of rotation seen from rear. Clockwise Counter clockwise
Shaft details
All measurements should be filled in
ØA .................................. ØD ......................................
Type of thread ..............................................................
S ................................ W ........................
Jan. 2013 All prices listed are subject to UK VAT. Carriage and packing extra.
23

24
Plant List & Facilities
TURNING
WINTEC TC -15 CNC LATHE
COLCHESTER TRIUMPH 2000, CNC - 7½” wing over bed.
(15” dia.), 48” between centres, 2” through headstock. FANUC controls.
COLCHESTER MASTIF - 10½” swing over bed (21” dia.), 48” between centres, 3½” dia. through
headstock, taper turning & Ainjest screw cutting attachment.
COLCHESTER STUDENT - 6½” swing over bed (13” dia.), 24” between centres, 1½” through
headstock, hydraulic copy attachment, and collet set.
With the above turning capacity 3” dia. shafts up to 16’ long can be machined.
MILLING
ADCOCK & SHIPLEY HORIZONTAL MILL - 24” under the spindle 10” x 36” table.
(Cutters & Dividing Head for spline shaft manufacture).
HAYES TURRET MILL - 20” under the spindle 12” x 36” table.
BRIDGEPORT TURRET MILL - 20” under the spindle, 12” x 36” table.
Both machines are complimented by rotary tables dividing heads etc & digital readout on
Turret Mill.
SLOTTING & BROACHING
SLOTTER - 6” stroke with 12” dia. table. 24” maximum dia. in gap.
MARCO PUSH BROACH - Imperial up to 3/8” wide and metric up to 10mm wide for
both straight and taper boxes.
BROACHING MACHINE LA POINT 48” HYDRAULIC PULL BROACH
(various imperial spline and keyway broaches held).
DRILLING
2, MEDDINGS PILLAR DRILLS - up to ½” (13mm) holes.
HERBERT 4 SPINDLE PRODUCTION PILLAR DRILL.
ASSEMBLY
We manufacture under contract marine drive system components and assemblies in house
including testing prior to despatch. We also produce ‘LAKE’ sterngear for the marine market.
Capacity available for sub-contract machining and assembly.
All prices listed are subject to UK VAT. Carriage and packing extra. Jan. 2013

Jan. 2013
Sillette Sonic Ltd.
Unit 2 Beverley Trading Estate
190 - 192 Garth Road
Morden, Surrey
SM4 4LU - UK
tel: +44 (0)20 8337 7543 fax: +44 (0)20 8330 9014
e-mail: sales@sillette.co.uk
website: www.sillette.co.uk
METHODS OF PAYMENT
Personal or company cheque payable to this company and drawn on a UK bank,
(subject to prior clearance for non-account customers).
Bank transfer international or otherwise.
Bank draft international or otherwise payable to this company and drawn on a UK bank.
Please make all cheques payable to Sillette Sonic Ltd.
(Cheques must be in Sterling Pounds and be payable by a bank in the UK)
BANK DETAILS:
Lloyds TSB Bank plc Sort Code 30-98-36 Account No. 02465488
49 High Street
Sutton, Surrey
SM1 1DX
TT / WIRE / SWIFT / & ORDINARY payments from overseas should be in Sterling Pounds and all bank charges
pre-paid (yours & ours).
Alternatively send Sterling Pound bank drafts payable by a UK bank.
For international payments, use the following codes as well.
SWIFT / BIC Code Number LOYD GB 21235
In favour of IBAN GB 66 LOYD 30983602465488
VISA, MASTERCARD, MAESTRO & SWITCH payments are accepted, in person, or by e-mail, mail, telephone
or fax.
For all mail order transaction using a credit/debit card quote the following:
• Cardholder name as it appears on the card.
• Billing address at which the card is registered.
• Card Number and expiry date (for debit card the issue number and commencement date also).
• The address where the goods are to be delivered if different to the billing address.
• The 3 digit security code number on the reverse of the card.
• A telephone, or fax number is also important.
TERMS & CONDITIONS - key points
All prices listed in this catalogue are subject to carriage and UK VAT. Foreign buyers within the EU must notify
their VAT/TVA number if they are registered, so that we can zero rate their invoice, for goods over £300 in net
value.
Prices are subject to fluctuation and should be checked before ordering.
All sizes and specifications are subject to alteration without notice, please check current specification when
ordering.
No goods supplied on approval or on a sale or return basis unless previously agreed, in writing.
All goods correctly supplied are not returnable.
All propeller size advice is an opinion only based on customer information, and may require modification or fine
tuning at customer expense after trials.
All transmission products are sold/specified from customers advised application and power use.
Any variation to this must be agreed and confirmed in writing in advance of use.
All deposits paid are non-refundable.
All invoices rendered are confirmation of your order detail, please check on receipt and advise right away if
not agreed.
All goods are sold on the General Terms and Conditions of the seller. Full detail available on request.
All prices listed are subject to UK VAT. Carriage and packing extra.

MARINE
PROPULSION
Tel: +44 (0)20 8337 7543 • Fax: +44 (0)20 8330 9014
Email: sales@sillette.co.uk
www.sillette.co.uk