External Dental Implant Catalog - BioHorizons

More documents

Recommendations

Info

The Surgical Drills included in the External Surgical Kit are externally irrigated and designed to be used at speeds of 850-2,500 rpm 9 with steady sterile irrigation. Reduced drill speed may be desired in softer bone or as drill diameter increases. The depth marks are consistent throughout the Starter Drill, Depth Drills and Width Increasing Drills. The thick bands are each one millimeter wide. Thin lines are used to mark 7mm and 11mm. Peri-operative oral rinses with a 0.12% Chlorhexidine Digluconate solution have been shown to significantly lower the incidence of post-implantation infectious complications. 10 A preoperative 30-second rinse is recommended, followed by twice daily rinses for two weeks following surgery. Drilling must be done under a constant stream of sterile irrigation. A pumping motion should be employed to prevent overheating the bone. Surgical drills and taps should be replaced when they are worn, dull, corroded or in any way compromised. BioHorizons recommends the replacement of drills after 12 to 20 osteotomies. 11 A Drill-usage Tracking Chart is available from BioHorizons to aid offices in archiving this important information. There is a risk of injury to the mandibular nerve associated with surgical drilling in lower posterior regions. To minimize the risk of nerve injury, it is imperative the clinician understand the drill depth markings in order to correlate implant length with the actual drilling depth to produce the desired vertical placement of the implant. products products shown shown not to scale scale 14mm 12mm 10mm Drilling Considerations 30 SURGICAL DRILLS 15mm 13mm 11mm 9mm 7mm
OSTEOTOMY INITIALIZATION 2.0mm Starter Drill Purpose: Initiates osteotomy. • Chisel-tip design eliminates “skating” on osseous crest • Initiates osteotomy to desired depth • Prepares site for Paralleling Pins Purpose: Sets osteotomy depth following use of the 2.0mm Starter Drill. • Fixed circular ring acts as a definitive drill stop • One drill length for each implant length • 1mm laser-etched line guides supracrestal implant placement • BioHorizons Surgical Kit includes spare slots for Depth Drills with Stops • Please call for availability 2.5 x 12mm Depth Stop Drill 12mm long External Implant 31 2.5mm Depth Drill Purpose: Sets osteotomy depth following use of the 2.0mm Starter Drill. • Efficient cutting drill design collects bone for autografting 2.5mm Depth Drill with Stop 2.5mm Depth Drill without Stop products shown not to scale
Page 1 and 2: uncompromised strength, proven succ
Page 3 and 4: Table of Contents Product Catalog S
Page 5 and 6: Crestal bone maintenance leads to s
Page 7 and 8: HEALING ABUTMENTS & COVER SCREWS Us
Page 9 and 10: SURGICAL KIT COMPONENTS 133-100 145
Page 11 and 12: ANCILLARY SURGICAL INSTRUMENTS 122-
Page 13 and 14: W&H MOTORS AND ACCESSORIES Motor Ki
Page 15 and 16: INDIVIDUAL ABUTMENTS 233-410 234-41
Page 17 and 18: INDIVIDUAL ABUTMENTS 273-000 274-00
Page 19 and 20: IMPRESSION COMPONENTS 243-320 244-3
Page 21 and 22: LOCATOR ABUTMENT COMPONENTS LIC Loc
Page 23 and 24: BALL ABUTMENT COMPONENTS BCAS Ball
Page 25 and 26: ABUTMENT FOR SCREW COMPONENTS PXHA
Page 27 and 28: ANCILLARY PROSTHETIC INSTRUMENTATIO
Page 29 and 30: SURGICAL PROTOCOLS Two-stage Protoc
Page 31: SURGICAL KIT LAYOUT The External Su
Page 35 and 36: CRESTAL BONE DRILLS & BONE TAPS Pur
Page 37 and 38: IMPLANT PICK-UP • Premounted 3inO
Page 39 and 40: COVER SCREWS & HEALING ABUTMENTS Pu
Page 41 and 42: APPENDIX 39 Post-operative Consider
Page 43 and 44: ORDERING & WARRANTY INFORMATION Pro

External Dental Implant Catalog - BioHorizons

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?