External Dental Implant Catalog - BioHorizons

Extended Shank Drills (not included in Surgical Kit)
Extended Shank Drills are 8mm longer than our standard drills. They provide an
intermediary increase in length between the standard drills used alone, or with the Drill
Extender (ref. 122-100), which adds 16mm of length. The depth marks and cutting
geometry are identical to our standard drills.
Ratchet & Hand Wrench Extender
Surgical Driver
products shown not to scale
ANCILLARY SURGICAL INSTRUMENTS
122-403
122-42507
122-42509
122-425105
122-42512
122-42515
122-425
122-430
122-432
122-437
122-442
122-447
122-452
300-205
150-000 Surgical Driver
8
2.0mm Starter Drill, Extended Shank
2.5 x 7mm Depth Drill, Extended Shank
2.5 x 9mm Depth Drill, Extended Shank
2.5 x 10.5mm Depth Drill, Extended Shank
2.5 x 12mm Depth Drill, Extended Shank
2.5 x 15mm Depth Drill, Extended Shank
2.5mm Depth Drill, Extended Shank
3.0mm Width Increasing Drill, Extended Shank
3.4mm Width Increasing Drill, Extended Shank
3.9mm Width Increasing Drill, Extended Shank
4.4mm Width Increasing Drill, Extended Shank
4.9mm Width Increasing Drill, Extended Shank
5.4mm Width Increasing Drill, Extended Shank
Ratchet & Hand Wrench Extender
Can be used with Bone Taps (page 7).
Use to drive implants into the osteotomy, particularly in the anterior region.
The driver holds the Abutment-level Driver, Ratchet which interfaces with the
3inOne Abutment. Also interfaces with the .050” (1.25mm) Hex Drivers as
well as Bone Taps and the Implant-level Drivers, Ratchet.