String Book - Logan Oil Tools
String Book - Logan Oil Tools String Book - Logan Oil Tools
6 tUBing maKe-Up torQUe nL AtLAS BRADFoRD FL- S MInIMuM MAkE-up toRQuE * o.D. Weight grade — torque (ft/lb) (in) (lb/ft) J-55 & k-55 C-75, n-80, & p- 05 4.70 & 5.95 400 500 2.375 6.65 500 600 6.50 & 7.90 600 800 2.875 8.70 & 10.40 700 900 7.70, 9.30 & 10.30 1,400 1,600 3.500 12.70, 12.95 & 15.50 1,500 1,700 9.50 2,000 2,300 4.000 11.00 & 11.60 2,200 2,500 14.00 2,400 2,700 9.50 & 10.50 2,500 11.60 & 12.60 2,700 3,200 4.500 13.50 & 15.10 3,000 3,500 16.90 & 18.80 3,200 3,700 * Data reprinted from 1983 NL Atlas Bradford Tubular Products Catalog.
tUBing maKe-Up torQUe ARMCo IJ nu-LoCk tuBIng RECoMMEnDED MAkE-up toRouE * o.D. torque (ft-Ib) (in) Minimum optimum Maximum 2-3/8 1,000 1,500 2,000 2-7/8 1,500 2,000 2,500 3-1/2 2,000 2,500 3,000 Note: IJ Nu-Lock tubing is designed to make up to the external shoulder. Torque values given above are intended to be used as a guideline only and apply to all weights and grades for the listed sizes. * Data reprinted from Armco Bulletin No. 664, June 1982. ARMCo t&C nu-LoCk tuBIng RECoMMEnDED MAkE-up toRQuE * o.D. torque (ft-Ib) (in) Minimum optimum Maximum 2-3/8 1,000 1,200 2,000 2-7/8 1,500 1,800 2,500 3-1/2 2,000 2,500 1,300 Note: External shoulder contact is nominal make-up for T&C Nu-Lock tubing. Torque values given above apply to all weights and grades for the listed sizes. * Data reprinted from Armco Bulletin No. 664, June 1982. 65
- Page 15 and 16: Logan SerieS 150 reLeaSing & circUL
- Page 17 and 18: Logan SerieS 150 reLeaSing & circUL
- Page 19 and 20: Logan SUperior energizerS Mandrel t
- Page 21 and 22: Logan LUBricateD fiShing BUmper SUB
- Page 23 and 24: api regULar — Union tooL regULar
- Page 25 and 26: api internaL fLUSh — hUgheS anD r
- Page 27 and 28: A pac .38 G D J C B E Diameter of s
- Page 29 and 30: hughES SLIM hoLE Size A B C D E F g
- Page 31 and 32: .1000 .0461 1/8 R 45° .015R A hUgh
- Page 33 and 34: 30° G A hyDriL jointS H - Threads
- Page 35 and 36: SeamLeSS DriLL pipe performance pro
- Page 37 and 38: api DriLL coLLar anD joint SizeS ±
- Page 39 and 40: DriLL coLLar torQUe recommenDationS
- Page 41 and 42: DriLL coLLar torQUe recommenDationS
- Page 43 and 44: DriLL coLLar torQUe recommenDationS
- Page 45 and 46: DriLL coLLar WeightS — poUnDS per
- Page 47 and 48: 20" +2 / -0 DriLL coLLar grooveS fo
- Page 49 and 50: WeB WiLSon ® forgeD LinKS A (Lengt
- Page 51 and 52: WeLD-on type tooL jointS maKe-Up to
- Page 53 and 54: WeLD-on type tooL jointS maKe-Up to
- Page 55 and 56: WeLD-on type tooL jointS maKe-Up to
- Page 57 and 58: tUBing maKe-Up torQUe non-upSEt REC
- Page 59 and 60: tUBing maKe-Up torQUe EXtERnAL upSE
- Page 61 and 62: tUBing maKe-Up torQUe nL AtLAS BRAD
- Page 63 and 64: tUBing maKe-Up torQUe nL AtLAS BRAD
- Page 65: tUBing maKe-Up torQUe nL AtLAS BRAD
- Page 69 and 70: tUBing maKe-Up torQUe hyDRIL CS AnD
- Page 71 and 72: tUBing maKe-Up torQUe hyDRIL FJ tuB
- Page 73 and 74: tUBing maKe-Up torQUe MAnnESMAnn tD
- Page 75 and 76: tUBing maKe-Up torQUe VALLouREC VAM
- Page 77 and 78: atLaS BraDforD tUBing jointS A Size
- Page 79 and 80: tUBing preSSUre rating Internal yie
- Page 81 and 82: StanDarD SteeL pipe SizeS Standard
- Page 83 and 84: threaDeD anD coUpLeD-type caSing Si
- Page 85 and 86: threaDeD anD coUpLeD-type caSing Si
- Page 87 and 88: caSing maKe-Up torQUe — Short thr
- Page 89 and 90: caSing maKe-Up torQUe — Long thre
- Page 91 and 92: caSing maKe-Up torQUe — Long thre
- Page 93 and 94: caSing maKe-Up torQUe — Long thre
- Page 95 and 96: caSing Bit SizeS anD cLearanceS ApI
- Page 97 and 98: caSing Bit SizeS anD cLearanceS nAt
- Page 99 and 100: caSing Bit SizeS anD cLearanceS pIt
- Page 101 and 102: caSing Bit SizeS anD cLearanceS SpA
- Page 103 and 104: 120° KeLLy croSS-Section DimenSion
- Page 105 and 106: BUoyancy factor for SteeL pipe Flui
- Page 107 and 108: fLange DimenSionS StuDS, nutS, AnD
- Page 109 and 110: BrineLL harDneSS taBLe BRInELL ( ,0
- Page 111 and 112: Fraction Decimal (in) Millimeter 1/
- Page 113 and 114: torQUe oUtpUt With manUaL tongS LIn
- Page 115 and 116: proper pLacement of torQUe inDicato
tUBing maKe-Up torQUe<br />
ARMCo IJ nu-LoCk tuBIng RECoMMEnDED MAkE-up toRouE *<br />
o.D. torque (ft-Ib)<br />
(in) Minimum optimum Maximum<br />
2-3/8 1,000 1,500 2,000<br />
2-7/8 1,500 2,000 2,500<br />
3-1/2 2,000 2,500 3,000<br />
Note: IJ Nu-Lock tubing is designed to make up to the external shoulder.<br />
Torque values given above are intended to be used as a guideline<br />
only and apply to all weights and grades for the listed sizes.<br />
* Data reprinted from Armco Bulletin No. 664, June 1982.<br />
ARMCo t&C nu-LoCk tuBIng RECoMMEnDED MAkE-up toRQuE *<br />
o.D. torque (ft-Ib)<br />
(in) Minimum optimum Maximum<br />
2-3/8 1,000 1,200 2,000<br />
2-7/8 1,500 1,800 2,500<br />
3-1/2 2,000 2,500 1,300<br />
Note: External shoulder contact is nominal make-up for T&C Nu-Lock tubing.<br />
Torque values given above apply to all weights and grades for the listed sizes.<br />
* Data reprinted from Armco Bulletin No. 664, June 1982.<br />
65