String Book - Logan Oil Tools
String Book - Logan Oil Tools
String Book - Logan Oil Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Snub<br />
Line<br />
proper pLacement of torQUe inDicatorS<br />
Step : Look up the minimum recommended<br />
torque required.<br />
Step : Divide this torque value by the effective<br />
tong length.<br />
Step : Divide this by 3 and multiply by 2. This<br />
will be the pounds pull reading for the line-pull<br />
indicator when in this position.<br />
Snub<br />
Line<br />
90°<br />
90°<br />
Torque Indicator<br />
Torque Indicator<br />
Snub Line<br />
The amount of cathead<br />
pull will be 1/2 of the<br />
line-pull reading on<br />
the Torque Indicator.<br />
Snub Line<br />
The amount of cathead<br />
pull will be 1/2 of the<br />
line-pull reading on<br />
the Torque Indicator.<br />
Step : Look up the minimum recommended<br />
torque required.<br />
Step : Divide this torque value by the effective<br />
tong length.<br />
Step : Divide this by 5 and multiply by 4. This<br />
will be the pounds pull reading for the line-pull<br />
indicator when in this position.<br />
Snub Line<br />
Torque Indicator<br />
The amount of cathead<br />
pull will be 1/5 of the<br />
line-pull reading on<br />
the Torque Indicator.<br />
Step : Look up the minimum recommended<br />
torque required.<br />
Step : Divide this torque value by the effective<br />
tong length.<br />
The answer is pounds pull reading for the linepull<br />
indicator when in this position.<br />
Multiple line hookups can provide many times<br />
the normal make-up line-pull. Great care should<br />
be taken to see that the lines do not become<br />
crossed, twisted, or fouled. When it comes time<br />
for the “big pull,” be sure everyone is in the clear.<br />
Caution: Know the tong’s rating before the<br />
pull is attempted.<br />
The slack in the tong snub line should be sufficient<br />
for the tongs to obtain full benefit of the pull<br />
from the cathead, but short enough to pre-vent<br />
complete rotation of the tongs.<br />
NOTE: The rotary must be unlocked when the Torque Indicator is in the snub line.<br />
90°<br />
Snub Line<br />
5