String Book - Logan Oil Tools

More documents

Recommendations

Info

Snub Line proper pLacement of torQUe inDicatorS Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 2. This will be the pounds pull reading for the line-pull indicator when in this position. Snub Line Snub Line 90° Torque Indicator The amount of cathead pull will be the same as the line-pull reading on the Torque Indicator. 90° Snub Line Torque Indicator The amount of cathead pull will be the same as the line-pull reading on the Torque Indicator. Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 2. This will be the pounds pull reading for the line-pull indicator when in this position. Snub Line The amount of cathead pull will be 2/3 of the line-pull reading on the Torque Indicator. \Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 2. This will be the pounds pull reading for the line-pull indicator when in this position. Torque Indicator Snub Line The amount of cathead pull will be the same as the line-pull reading on the Torque Indicator. Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 3. This will be the pounds pull reading for the line-pull indicator when in this position. NOTE: The rotary must be unlocked when the Torque Indicator is in the snub line. 90° Snub Line 90° Torque Indicator Snub Line
Snub Line proper pLacement of torQUe inDicatorS Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 3 and multiply by 2. This will be the pounds pull reading for the line-pull indicator when in this position. Snub Line 90° 90° Torque Indicator Torque Indicator Snub Line The amount of cathead pull will be 1/2 of the line-pull reading on the Torque Indicator. Snub Line The amount of cathead pull will be 1/2 of the line-pull reading on the Torque Indicator. Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. Step : Divide this by 5 and multiply by 4. This will be the pounds pull reading for the line-pull indicator when in this position. Snub Line Torque Indicator The amount of cathead pull will be 1/5 of the line-pull reading on the Torque Indicator. Step : Look up the minimum recommended torque required. Step : Divide this torque value by the effective tong length. The answer is pounds pull reading for the linepull indicator when in this position. Multiple line hookups can provide many times the normal make-up line-pull. Great care should be taken to see that the lines do not become crossed, twisted, or fouled. When it comes time for the “big pull,” be sure everyone is in the clear. Caution: Know the tong’s rating before the pull is attempted. The slack in the tong snub line should be sufficient for the tongs to obtain full benefit of the pull from the cathead, but short enough to pre-vent complete rotation of the tongs. NOTE: The rotary must be unlocked when the Torque Indicator is in the snub line. 90° Snub Line 5
Page 1 and 2:
String Book Keep Your String Togeth
Page 3 and 4:
DISCLAIMER Logan Oil Tools has publ
Page 5 and 6:
contentS CASIng DAtA - BIt SIzES An
Page 7 and 8:
Logan SerieS 10 SUcKer roD overShot
Page 9 and 10:
SerieS 20 Short catch SUcKer roD ov
Page 11 and 12:
Logan SerieS 70 Short catch overSho
Page 13 and 14:
Logan SerieS 150 reLeaSing & circUL
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Logan SUperior energizerS Mandrel t
Page 21 and 22:
Logan LUBricateD fiShing BUmper SUB
Page 23 and 24:
api regULar — Union tooL regULar
Page 25 and 26:
api internaL fLUSh — hUgheS anD r
Page 27 and 28:
A pac .38 G D J C B E Diameter of s
Page 29 and 30:
hughES SLIM hoLE Size A B C D E F g
Page 31 and 32:
.1000 .0461 1/8 R 45° .015R A hUgh
Page 33 and 34:
30° G A hyDriL jointS H - Threads
Page 35 and 36:
SeamLeSS DriLL pipe performance pro
Page 37 and 38:
api DriLL coLLar anD joint SizeS ±
Page 39 and 40:
DriLL coLLar torQUe recommenDationS
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
DriLL coLLar WeightS — poUnDS per
Page 47 and 48:
20" +2 / -0 DriLL coLLar grooveS fo
Page 49 and 50:
WeB WiLSon ® forgeD LinKS A (Lengt
Page 51 and 52:
WeLD-on type tooL jointS maKe-Up to
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
tUBing maKe-Up torQUe non-upSEt REC
Page 59 and 60:
tUBing maKe-Up torQUe EXtERnAL upSE
Page 61 and 62:
tUBing maKe-Up torQUe nL AtLAS BRAD
Page 63 and 64:
tUBing maKe-Up torQUe nL AtLAS BRAD
Page 65 and 66: tUBing maKe-Up torQUe nL AtLAS BRAD
Page 67 and 68: tUBing maKe-Up torQUe ARMCo IJ nu-L
Page 69 and 70: tUBing maKe-Up torQUe hyDRIL CS AnD
Page 71 and 72: tUBing maKe-Up torQUe hyDRIL FJ tuB
Page 73 and 74: tUBing maKe-Up torQUe MAnnESMAnn tD
Page 75 and 76: tUBing maKe-Up torQUe VALLouREC VAM
Page 77 and 78: atLaS BraDforD tUBing jointS A Size
Page 79 and 80: tUBing preSSUre rating Internal yie
Page 81 and 82: StanDarD SteeL pipe SizeS Standard
Page 83 and 84: threaDeD anD coUpLeD-type caSing Si
Page 85 and 86: threaDeD anD coUpLeD-type caSing Si
Page 87 and 88: caSing maKe-Up torQUe — Short thr
Page 89 and 90: caSing maKe-Up torQUe — Long thre
Page 95 and 96: caSing Bit SizeS anD cLearanceS ApI
Page 97 and 98: caSing Bit SizeS anD cLearanceS nAt
Page 99 and 100: caSing Bit SizeS anD cLearanceS pIt
Page 101 and 102: caSing Bit SizeS anD cLearanceS SpA
Page 103 and 104: 120° KeLLy croSS-Section DimenSion
Page 105 and 106: BUoyancy factor for SteeL pipe Flui
Page 107 and 108: fLange DimenSionS StuDS, nutS, AnD
Page 109 and 110: BrineLL harDneSS taBLe BRInELL ( ,0
Page 111 and 112: Fraction Decimal (in) Millimeter 1/
Page 113 and 114: torQUe oUtpUt With manUaL tongS LIn
Page 115: proper pLacement of torQUe inDicato
Page 119 and 120: eLevator anD tooL joint inSpection
Page 121: Baash-Ross, Web Wilson, Hillman-Kel
show all

String Book - Logan Oil Tools

Create successful ePaper yourself

Delete template?

Save as template?