SURGICAL INSTRUMENTS - Holmed Corporation

HAND-HELD 

SURGICAL INSTRUMENTS 

FOR GENERAL ORTHOPEDICS AND SPINE 

TESTED 

TO HIGHER 

STANDARDS 

HOLMED CORPORATION 

Worldwide Provider - Quality Products - Personalized Service 

JANUARY 

2011 

PRODUCT 

CATALOG

HOLMED 

APPRO ED 

MIS 

1-15 

CUTTING DEVICES 

16-25 

TORQUE PRODUCTS 

26-29 

SCREWDRIVERS 

30-40 

RODHOLDERS 

& VISE GRIPS 

41-43 

COMPRESSORS 

& DISTRACTORS 

44-48 

RETRACTORS 

49-54 

TRAUMA 

55-57 

MISCELLANEOUS 

58-68 

INDEX 

69-71 

NEW! 

We have added many 

new products to this 

years catalog! 


When it comes to Quality, we provide the type of service that you need and 

expect. Holmed Corporation is FDA registered, ISO 9001:2000 and ISO 

13485:2003 certified, and continues to work toward higher standards 

than required by our customers. Some of our customers have recognized 

our success by placing us on their: "Dock to Stock" programs. Our goal is to 

achieve 100% Customer Satisfaction. 

Our team is committed to high standards right from the start of the job 

with first piece and in-process inspections. All assemblies are rigorously 

tested for function before any product is shipped to ensure customer 

satisfaction. It is no wonder why people choose Holmed Corporation as 

their first and only choice! 

For ordering or questions: 

1-508-238-3351 

Sales-CustomerSupport@holmed.net 

www.holmed.net

Welcome to Holmed 

Product Development and Manufacturing 

Hand in hand, our product development team will work with you to create 

designs, generate documentation, and perform verification/validation testing. 

Our development team utilizes 3D modeling and Rapid (SLA) Prototyping 

to produce quality products on schedule. We partner with your team from 

device conception through production. Holmed has over 30 years experience 

producing quality products on time. We encourage you to share your design 

needs with our team no matter how small or large the project. 

Contact: engineering@holmed.net 

1-508-238-3351 www.holmed.net

HOLMED 

APPRO ED 

TESTED TO HIGHER STANDARDS 

At Holmed, we design and test our products to higher standards which translate into 

higher revenue and lower costs for our customers. Our products are tested to perform 

accurately and reliably under testing criteria that is significantly higher than industry 

standards. For many of our products this translates to double the level of testing from 

other product on the market. 

Designing and testing our products to rigorous standards translates into higher revenue 

for our customers. They can perform more surgeries and safer surgeries with our 

instruments, because the instruments need less maintenance and repair. Our customers 

also enjoy lower costs because the instruments last longer and require less maintenance. 

Holmed Products are More Reliable 

Our products are 

tested for longer 

durations 

Holmed 

Others 

1-508-238-3351 www.holmed.net 

Torque Limiter Values 

Our products are 

tested at higher 

values

INNOVATORS OF SPINAL 

MIS PROCEDURES 

* Provides intuitive, easy-to-use, safe and effective MIS system 

* Provides excellent visualization and working space through 

a large adjustable viewing width at the spine level 

* The comprehensive, reusable system is priced competitively 

and less expensive than "bundled" and "disposable" alternatives 

* Offers a flexible system which can be used with most pedicle 

screw and implant systems 

* Eliminates muscle creep 

THE SWIVEL PORT SYSTEM OFFERS: 

* The lowest cost on the market providing the opportunity to acquire multiple sets ts 

for efficient processing and quick Operating Room turn over 

* The greatest ratio of flexible distal visualization to proximal incision on the market ket today 

* The opportunity to standardize your approach across numerous implant vendors ors as 

well as a standardized retraction system for both instrumented and non-instrumented umented procedures 

* A great transitional system to get you from "open" procedures to a truly easy to set 

up and use MIS system, preserving the visualization you need and the stability you require 


MIS 

1

MIS 

2 

SWIVEL STANDARD LUMBAR 27 SYSTEM 

The "Standard Disc Prep Port Set" 

is used for " Posterior Lumbar 

Spinal Procedures" including: 

Pedicle screw placement 

Cage insertion 

Discectomy 

Laminectomy 

Hemilaminectomy 

Facetectomy 


Product No. 130421 













Patented Product 

Standard Lateral Port Set 

Product No. 97-1140 

Lateral Equal Length Blades Short 

Lateral Equal Length Blades Medium 

Lateral Equal Length Blades Long 

Lateral Offset Blades Short (midline) 

Lateral Offset Blades Medium (midline) 

Lateral Offset Blades Long (midline) 

Lateral Short Expander Blades 

Lateral Medium Expander Blades 

Lateral Long Expander Blades 

Lateral Handle 

Lateral Rotating Ring 

Blunt Dissector 

Lateral Screwdriver

18 MINI POSTERIOR PORTS 

The "Mini Posterior Port Set" is used 

for "Posterior Lumbar and Cervical 

Procedures" including: 

Microdiscectomy 


Foraminotomy 


Mini Posterior Port Set 















Posterior Short Swivel Port 58mm Blade 

Posterior Medium Swivel Port 71mm Blade 

Posterior Short Long Port 84mm Blade 

Posterior X-Long Swivel Port 97mm Blade 

Posterior Short Expander Blade 

Posterior Medium Expander Blade 

Posterior Long Expander Blade 

Posterior X-Long Expander Blade 

Posterior Rotating Ring 

Posterior Cobb Elevator W/ Handle 

Short Blue Handle 

Short Screw Insert 

Posterior Handle 


MIS 

3

MIS 

4 

360° BEVEL SWIVEL PORT 

Now Available with 360° Bevel and Optional Side Pins 

For improved instrument angulation 

SWIVEL PORT SIDE PIN OPTION 

Optional Side Pins for additional utility 


NEW! 

NEW!

Product No. 97-3500-50 

Product No. 97-3500-60 

Product No. 97-3500-70 

Product No. 97-3500-80 

Product No. 97-3501-50 

Product No. 97-3501-60 

Product No. 97-3501-70 

Product No. 97-3501-80 

Product No. 97-3502-50 

Product No. 97-3502-60 

Product No. 97-3502-70 

Product No. 97-3502-80 

NEW! 

SWIVEL OVOID PORT 

Port with Handle 

50mm Equal Blade 




50mm Offset Blade 




Swivel Standard OVOID Lumbar Tray Set 


50mm Expander Blade 




Distal width is adjustable by the surgeon. 

Wider width of 35mm in superior/inferior 

plane of proximal working aperture for 

surgeons doing multi-level procedures. 


MIS 

5

MIS 

6 

MINI BAYONETS 

Lightweight and bayoneted instruments assist the surgeon with freeing up the 

nerve roots and decompression of the lumbar spine. 

Curved Cu Tip Ball Probe 

1.7mm 1. dia 

Product Pr No. 97-1822 

90° Ball Probe 

1.7mm dia. X 8.4mm Length 



Mini Bayonet Set Product No. No 97-1144 

Penfi Penfield 

Probe 

3mm Narrow 

Product Prod No. 97-1821 

20° 20 Oval End Cut Gouge 

3mm 3m x 5mm 

Product Pro No. 97-1819 

Up CCutting 

Straight 

3mm x 5mm 


10° Backward Bend Oval 

3mm 3mm x 5mm 


Down Dow Cutting Straight 

3mm x 5mm 

Product Prod No. 97-1820

STANDARD DISC 

PREP BAYONETS 

These disc prep instruments are small and bayoneted 

for great visibility in small working channels. The size 

allows for use with most standard “MIS” dilation and 

retractor sets. 

Penfi Penfield 

Probe 

6.6mm 6.6m Wide 


Penfi Pe eld Probe 

3.5mm 3.5 Narrow 


Curved Ball Probe 

2.5mm dia Tip 


90° Ball Probe 

2.5mm dia. Tip x 10mm Length 


10° Backwards Bend 

3.8mm 3.8 x 6mm 


Straight Stra 

3.8mm 3.8 x 6mm 


Standard Lateral Bayonet Set 


Angled A Forward Cutting 

3.8mm x 6mm 


Angled A Forward 

Cutting Gouge 

5mm x 8mm 


Straight Left 

Cutting Teardrop 

7.75mm Wide 


Straight Right 

Cutting Teardrop 

7.75mm Wide 


Up Fenestrated 

Left Cutting Teardrop 

7.75mm Wide 


Up Fenestrated 

Right Cutting Teardrop 

7.75mm Wide 



MIS 

7

MIS 

8 

FORCEPS 

These small light-duty decompression instruments are 

unique as they may be taken apart for cleaning where 

standard products fail. 

Call for more information and available sizes 


2mm Up-Biting Disc Forceps 


2mm Straight Disc Forceps 


BAYONET BLADE HOLDER 

Disposable Bayonet Surgical Blade Holder 


Call for more information and available sizes


PIVOT TIPPED ROD FORCEP 

Very simple and easy to use. The articulating end makes this a very unique 

and patented product a “must-have” for placing rods in single or two level 

pedicle screw constructs. 









5.50mm Pivot Tipped Rod Forcep 


Also Available 




4.75mm 4 75mm Pivot Tipped Rod Forcep 






MIS 

9

MIS 

10 

DISC SPREADERS 

Available in both straight or angled shafts, 

spreaders are designed to properly size the 

vertebral disc spacer after decompression 

and before cage/bone insertion. 

Disc Spreader 9mm Straight 









Disc Spreader 11mm Angled 







Product No. 707209

TRACK DILATORS 

Very simple and easy to use. Assists with initial 

entry/placement of MIS ports. 










#1 Dilator 

#2 Dilator 

#3 Dilator 

#4 Dilator 

DILATION 

Dilation Tray Sets 

Standard 19 track dilator set with tray 

includes dilators: 1,2,3,4,19,4/track 


Standard 27 track dilator set with tray 

includes dilators: 1,2,3,4,5,6,6/track 


Mini 18 track dilator set with tray 

includes dilators: 1,2,3,4 


Mini 15 track dilator set with tray 

includes dilators: 1,2,3,4 


#4-19mm Dilator 

#4-19mm Track Dilator 

#5 Dilator 

#6 Dilator 

#6-27mm Track Dilator 


MIS 

11

MIS 

12 

FLEX ARM 

When mounted to any standard bed rail or Jackson table, 

the arm may be attached to most available retractor 

systems. Once the retractor is in place, the arm may be 

tightened to keep retractors secure from moving. 

Flex Arm Product No. 97-1156 

JACKSON TABLE ADAPTOR 


Jackson Table Adaptor Product No. 910000 

Adaptor required for use with standard 

Flex Arm and Jackson tables.

MIS COMPRESSOR 

This new and innovative compressor is designed specifically 

to work with the SSI Standard Port system. It is small enough 

to pass through the aperture and yet opens up to compress 

across most screw construct designs. 

MIS DISTRACTOR 

MIS Compressor Product No. 829000 

Distraction becomes easy with this new instrument. 

Designed specifically for the SSI Standard Port 

system, it fits easily through the center aperture 

and works with numerous pedicle screw 

systems. It's smooth sleek design allows 

for visualization for the surgeon 

while distracting the 

disc space. 

MIS Distractor Product No. 829200 

Patent Pending 


MIS 

13

MIS 

14 

TAMPS 

Available in both straight and bayonet versions, the thin diameter shafts allow 

for excellent visibility when tamping bone grafts into the disc space. 

8mm Round 

Bayonet Tamp 

25cm overall length 


8mm x 16mm 

Straight Oval Tamp 


8mm x 16mm 

Bayonet Oval Tamp 




Round Straight Tamp 


OSTEOTOMES 

The small 6mm size makes these great for 

removing osteophites or bone grafts from 

the iliac crest. 

6mm Wide Straight Osteotome 


6mm Wide Curved Osteotome 

Product No. 812100

FORCEPS 

Used where standard bipolar forceps are 

too short, these extended versions work with 

most tubular and “MIS” retractor systems. 

Disposable Bipolar Forceps 



LIGHT SOURCES 

Light Sources for use 

with "Standard" Ports 


Light Sources for use 

with "Mini" Ports 


RE-USABLE 

Bipolar Forcep 


BAYONET SCISSORS 

Bayonet Scissors 



Extended length for MIS applications 

STERILIZATION TRAY 

Great for all those “loose” instruments. The deep 2” ” 

tray will hold most standard instruments. 



MIS 

15

CUTTING TTING DEVICES 

RATCHETING ROD CUTTERS 

The patented ratchet cutting technology allows rods 

to be cut cleanly and without flying across the room. 

Additionally the smaller designed sizes will fit into most 

standard sterile tray systems. 

Available in sizes for: 

Ø4.75mm 

Ø5.0mm 

Ø5.5mm 

Ø6.0mm 

Ø6.35mm 

Call for additional sizes 

3.5mm Ratcheting Lightweight 

Handheld Rod Cutter 



4.00mm Ratchet 


5.50mm Table-Top Ratcheting Rod Cutter Product No. 158000 

16 1-508-238-3351 www.holmed.net 

5.5mm Ratcheting Rod Cutter 


NEW! 

2.5mm Non-Ratcheting Handheld Rod Cutter 


These sleek and lightweight rod cutters are 

perfect for small rods and “K” wires. By simply 

squeezing the handles, rods and pins are sheared 

easily leaving a smooth cut and no wires flying 

across the room. 


2.0mm Non-Ratcheting Handheld Rod Cutter 

Product No. 147900

PLATE & ROD CUTTERS 

Plate and Rod Cutter 3.5mm Rods 


Designed to cut Ø3.5mm cervical rods and 

customized for various posterior cervical plating 

systems, all with one instrument. 

1/4" Rod Cutter with Depth Gauge 


This all-purpose rod cutter has a “patented guide” 

within the jaws. The guide minimizes any twisting 

of larger rods reducing possible breakage. 

NEW! 

3.5mm In-Situ Rod Cutter 


Designed for in-situ cutting of titanium cervical rods. 

The simple shear action cuts rods cleanly and far 

superior to standard pin or wire cutting devices. 

NEW! 



Designed to cut Ø3.2mm (.125”) CoCr 

implant grade rods 

NEW! 



Designed to cut Ø3.5mm (.135”) CoCr 

implant grade rods 

UNIVERSAL ROTARY ROD CUTTER 

Simple leverage technology cuts rods cleanly and easily. 

When multiple rod sizes are available, simply change 

out the Rod Cutter Cartridge for cost savings. 

Universal Rotary Rod Cutter 

Product No. 97-1060 CUTTIN 

Rod cutter cartridges 

P/N 97-1045 

P/N 97-1046 

P/N 97-1044 

P/N 97-1048 

P/N 97-1049 

3.3mm Rod Cutter Cartridge 

5mm Rod Cutter Cartridge 

5.5mm Rod Cutter Cartridge 



1-508-238-3351 1-508-238-335 www.holmed.net 


17


HANDHELD 

ROD DEBURRER 

Easily remove sharp edges from cut rods 

with either hand-held deburring tool or 

"quick connect" styles for screwdrivers 

or power tool devices. 

Handheld Rod Deburrer 


OSTEOTOMES 

The small 6mm size makes these great for removing 

osteophites or bone grafts from the iliac crest. 

18 1-508-238-3351 www.holmed.net 

QUICK CONNECT 

ROD DEBURRERS 

1/4" Square Quick Connect 


6mm Wide Straight Osteotome 


6mm Wide Curved Osteotome 


"Zimmer " Style" Quick Connect 

Product P 

No. 658300 

"Hudson Style" Quick Connect 

Product No. 658200

KERRISONS 

The narrow footprint allows for access to the posterior disc 

space for both cervical and lumbar applications. Available in 

straight 2mm and curved 3mm versions. 

FORCEPS 

3mm Curved Tip Kerrison 


These small light-duty decompression instruments are 

unique as they may be taken apart for cleaning where 

standard products fail. 



2mm Narrow Kerrison - Straight 

Product No. No 691410 

2mm Up-Biting Disc Forceps 


1-508-238-3351 1 

www.holmed.net 


19


MINI BAYONETS 

For use with "Mini Swivel Port" systems for: 

Microdiscectomy 


Foraminotomy 

Mini Bayonet Set Product No. 97-1144 

STANDARD DISC PREP BAYONETS 



Product No. 97-1639 NEW! 



20 1-508-238-3351 www.holmed.net 





Product P No. 97-1823 





Product Proo 

No. 97-1822 



Pro Product No. 97-1804 


Product 

No. 97-1806 

Pro Product No. 97-1807 

For a complete 

product description 

see page 4 

Product Prod P No. 97-1820 

For a complete 

product description 

see page 5 

Product PProduct 

No. 97-1805 

Standard Disc Prep Bayonet Set Product No. 97-1143

TLIF SET 

Curette set is specifically designed for "TLIF" and "PLIF" 

type procedures. The handles have a unique easy on/ 

easy off patented design allowing for flexibility to change 

handles during a procedure. Each set comes with a set 

of 6 handles. 

25mm Cobb Elevator 

19mm Cobb Elevator 

9mm x 11mm 

Straight Osteotome 

9mm x 10mm 

Angled Osteotome 

Angled Double 

Sided Rasp 

#1 Oval End 

Cutting Curette 

Straight Fenestrated 

Cup Curette 

30° 30 Left Serrated 

#1 # Cup Curette 

30° Right Fenestrated 

Cup Curette 

30° Left Fenestrated Cup Curette 

TLIF Set 


10" Green Molded Light Weight 

Modular Handle 

30° Right Serrated 

#1 Cup Curette 

Straight Serrated 

#1 Cup Curette 



21


STANDARD MODULAR CURETTES 

SHOWN ACTUAL SIZE 


22 1-508-238-3351 www.holmed.net 

#000 6" Straight Cup Curette 

















Product No. 97-1440

SHOWN WITH TIPS ACTUAL SIZE, 

ALL IN STANDARD 6" LENGTH 

These curettes are designed for flexibility and cost savings. 

Each item may be purchased in standard lengths of 6" or 9" 

versions. These simple and patented products mount easily 

on a number of silicone molded handles available in a variety 

of handle sizes and colors found on the following pages. 

5mm Ring Curette, 9" length 


7mm Ring Curette, 9" length 


#1 Cup Curette, 9" length 


Fenestrated Ring Curette, 

Left, 9" length 


Fenestrated Ring Curette, 

Right, 9" length 


#1 Serrated Cup, Left, 9" length 


#1 Serrated Cup, Straight, 9" length 


#1 Serrated Cup, 

Right, 9" length 


9mm Osteotome, Curved, 9" length 


9mm Osteotome, Straight, 9" 




23


COMBO SET OF DISC SHAVERS 

AND CURETTES ALL IN ONE 

Designed as a basic set with both curette and shaver type instruments, this lower 

cost product duct gets the surgeon what they need quickly and efficiently at an affordable affoordable 

price 

NEW! 

16mm Disc Shaver Product No. 452016 






24 1-508-238-3351 www.holmed.net 

Endplate Disc Prep Set Product No. 750000 

These standard disc shavers come in sizes 6mm to 16mm. Each has a 1/4" Square quick connect 

so the blades may be oriented with the mating handle for each surgeons preferences. The 

titanium nitride coating adds additional longer term use and keeps the cutting edges sharp.

EASY ON/OFF MOLDED HANDLES 

Designed to be modular for cost savings, these well balanced and lightweight 

handles are interchangeable with “Modular Cutting” instruments. The silicone 

grips provide an exceptional non-slip surface, especially when working around 

the spinal canal and nerve roots. 


10" Long Handles 










25

TORQUE 

TORQUE LIMITERS 

All torque products are rigorously tested to standards that 

are higher than the ASTM standard. 

Our Torque Limiting Devices* are Tested to Higher Standards 

Tested Value; 

Number of Clicks: 

Calibration Cycles: 

*Patent Pending 

Holmed Others 

112 in-lbs 

6,000 

12 months 

26 1-508-238-3351 www.holmed.net 

90 in-lbs 

3,000 

6 months 

These new style limit devices provide an excellent solution to always having a reliable and predictable device on 

hand. The accuracy and longevity have been tested to the highest standards in the industry today. We dare you to 

compare! Please specify what torque (-XX), handle color, and connection required. 

IN-LINE TORQUE LIMITER T-HANDLE TORQUE LIMITER 

NEW! NEW! 

In-Line Torque Limiter 

Product No. 459300-XX 

T-Handle Torque Limiter 

Product No. 459500-XX

106 Lbf/in (12Nm) Torque Limit 

Device, 5mm Hex Tip 


"HUDSON STYLE" YLE" QUICK 

CONNECT 

Torque limit devices can be ordered with a variety of 

"Quick Connect" ends and set for your individual specific 

torque requirement. 

Product No. 570000-XXX 

NEW! NEW 

NEW! NEW! 

Product No. 595100-XXX 

TORQUE LIMITERS 

Designed for tightening screw constructs, the thin 

sleek shafts allow for use with most MIS port 

systems and anti-torque devices. 

27 Lbf/in (3Nm) Torque Limit Device, 

3mm Hex Tip Product No. 306000 

71 Lbf/in (8Nm) Torque Limit 

Device, 4mm hex Tip 





TORQUE 

27

TORQUE 

DISPOSABLE MINI 

TORQUE LIMITER 

Product Features 

• Available soon in 3 different sizes to 

accommodate torque requirements 

up 12Nm (106 IN-LBS) 

• Accuracy ±10% up to 100 clicks** 

• Can be designed to accommodate 

different connections** 

• Can be delivered non-sterile 

or delivered packaged/sterile 

• Single Use Only - Cannot be autoclaved 

without resulting in noticeable damage 

** Depending on size and specifications 

NEW! 

DISPOSABLE TORQUE LIMITER INSIDE TRAY 

(STERILE PACKAGING) 

Product Benefits 

• Helps avoid the potential use of an out of spec torque limiter in multiple cases 

• Eliminates the timely & costly process of re-calibration of reusable torque limiters 

• Eliminates the repeated autoclave process for reusable torque limiters 

• Eliminates and/or reduces the chance of infection - Single Use Only 

28 1-508-238-3351 www.holmed.net 

P/N 36600-XX Small 

P/N 366100-XX Medium 

P/N 366200-XX Large 

(XX = torque value required) 

Patent Pending

TORQUE MEASURING DEVICES 

Different from standard “limiting” devices, these measure actual torque 

applied to constructs. Available in a variety of configurations and quick 

connects to suit most applications. 

NEW! 

In-Line Disc Torque Measure Device, 

55 lbf-in, lbf- 1/4" Quick Connect 

Product Produ No. 584000 

4mm Hex Torque 

Indicator Device, 4Nm 




Please specify: XX - Torque 

requirement Tip configuration 

These “Indicator” type products give the surgeon much better control to set 

torque on an individual basis. They eliminate the snap or jarring action associated 

with limiting type devices. 

In-Line Dial Torque Measure Device, 

55 lbf-in, 1/4" Quick Connect 


T-Handle Disc Torque Measure Device, 

120 lbf-in, 1/4" Quick Connect 



TORQUE 

29

SCREWDRIVERS 

PICK THE RIGHT HANDLE IN 3 EASY STEPS 

1.) Choose The Quick 

Connection Desired 

A/O 

Zimmer 

or 

Mini-Zimmer 

Hudson H d 

1/4" Square 

30 1-508-238-3351 www.holmed.net 

2.) Choose Your 

Handle Style/Size 

Palm Handle 

Small Handle 

Medium Handle 

Large Handle 

T- Handle 

3.) Choose Your 

Handle Color 

Green 

Blue 

Black 

Gray 

Light Blue

1/4" SQUARE STYLE 

QUICK CONNECT MOLDED HANDLE SCREWDRIVERS 

Sure grip silicone molded handles provide 

a comfortable grip with solid performance. 

Small Blue Handle, 

1/4" Square Q.C., 

Ratcheting Driver 

P/N 164200 

Medium Blue Handle, 



P/N 164100 

Large rge gee Blue Handle, Handle Handle, e, 

1/4" Squ Square qu q ar are e QQ.C., C 

Ratcheting h Driver 

P/N 164500 

Black T-Handle, 



P/N 256000 

4.5" 

6.6" 

7.1" 

Palm Black Handle, 


Non-Ratcheting Driver 

P/N 259000 

4.5" 

Blue Palm Handle, 



P/N 164300 

NON-RATCHETING 

Palm Blue Handle, 



P/N 259100 




P/N 736000 


1/4" SQUARE 

SCREWDRIVERS 

31

HUDSON 

SCREWDRIVERS 

HUDSON STYLE 




Blue Small Handle, 

Hudson Style Q.C., 


P/N 162200 

Blue Medium Handle, 



P/N 162100 

32 1-508-238-3351 www.holmed.net 

4.5" 




P/N 162300 

Black TT-Handle, 

T-Handle, 

Hudson 

n Style Q.C., 

Ratchetin Ratcheting ng Driver 

P/N 733000 000 

6.6" 7.1" 

Black Large Handle, 



P/N 162500 

4.5" 

Blue Large Handle, 



P/N 162400

NON-RATCHETING MOLDED HANDLE HUDSON QC SCREWDRIVERS 

5.03" 

Light Blue Palm Handle, 



P/N 127200 

Green Palm Pal Palm Handle, Han Handle, 

Hudson son Style tyle Q.C. Q Q.C., C., 

Non-Ratcheting on-Ratcheting ing DDriver 

Driver 

P/N 127000 

5.4" 


Hudson Style tyle Q.C., 

Non-Ratcheting g Driver 

P/N 362200 

Blue lu T-Handle, 

Hudson Hudso Style Q.C., , 

Non-Ratcheting Non-Rat Driver river 

P/N / 36250 362500 

Black Palm 

Handle, 

Hudson Hudso Style Q.C., 

Non-Ratcheting Non 

Driver 

P/N P 127100 




P/N P/N 362600 

6.85" 

Black Medium Handle, 


Non-Ratcheting R Driver 

P/N N 262300 2623 

5.9" 



Non-Ratcheting ng Driver 

P/N 233000 

1-508-238-3351 www.holmed.net med.net 

HUDSON 

SCREWDRIVERS 

EWDRIVERS 

33

ZIMMER 

SCREWDRIVERS 

ZIMMER STYLE 



Zimmer Q.C., 


P/N 166300 


Zimmer Q.C., 


P/N 166200 

34 1-508-238-3351 www.holmed.net 



4.9" 6.6" 


Zimmer Q.C., 


P/N 166100 

6" 7.1" 

Blue Large Hand Handle, 

Zimm Zimmer Q.C., 


P/N 166400

MINI ZIMMER MOLDED HANDLE RATCHETING SCREWDRIVERS 


Mini-Zimmer Q.C., 


P/N 163300 

Small Handle 

Mini-Zimmer er Q.C., 


P/N 163200 

4.9" 6.6" 

Medium Handle 



P/N 163100 

6" 7.1" 

4.9" 


Zimmer Q.C., 


P/N 126000 

Large Handle 



P/N 163400 


MINI ZIMMER 

SCREWDRIVERS 

35

A/O 

SCREWDRIVERS 

A/O STYLE 




Black Palm Handle, 

A/O Q.C., 

Non-Ratcheting Diver 

P/N 135000 


A/O Pull Style Q.C., 

Ratchet Driver 

P/N 165100 


A/O Q.C., 

Non-Ratcheting Diver 

P/N 133000 

Green Medium Handle, 



P/N 165500 

36 1-508-238-3351 www.holmed.net 

Palm Handle, 

A/O Q.C. 


P/N 165300 

4.5" 6" 

Small Blue Handle 

A/O Q.C., 

Ratcheting Diver 

P/N 165200 

6.6" 7.1" 

Green Large Handle, 



P/N 165600 

4.5" 




P/N 165400

A/O STYLE QUICK CONNECT MOLDED HANDLE SCREWDRIVERS 

NEW! NEW! 


A/O Q.C., 


P/N 736500 

Blue T-Handle, THandle T-Handle, 

1/4" SSquare QQ.C., C 


P/N 733100 

Blue T-Handle, 

A/O Q.C., 


P/N 733500 

NEW! NEW! 




P/N 733200 


A/O 

SCREWDRIVERS 

37

SCREWDRIVERS 

QUICK CONNECT SCREWDRIVERS 

With most standard quick connections available, these ergonomic T-Handles allow 

for greater leverage than standard in-line type handles. 

1/4" Square Quick Connect 

Push T-Handle 


NEW! 

Extended A/O Style 

Quick Connect T-Handle 


38 1-508-238-3351 www.holmed.net 

Hudson Style Quick Connect 

SS T-Handle 


A/O Quick Connect 

Push T-Handle 

Product No. 562000

SQUARE QC EXTENDER 

Square QC Extender, For obese patients or where standard 

instrumentation need to be longer, this simple product will add 

another 3 inches of length for better access during surgery. 

Square QC Extender 


QUICK CONNECT SCREWDRIVERS 

With most standard quick connections available, these ergonomic T-Handles allow 

for greater leverage than standard in-line type handles. 

Mini Blue Handle A/O Connection 


SQUARE ADAPTER 

Adapt ¼” square drive shaft instruments to fit any 

standard Hudson style screwdriver or power tool. 

NEW! NEW! 

1/4 Square DDrive 

to Hudson Quick Connect Adaptor 

Product No. No 695000 

Brown Phenolic Handle A/O Connection 


(350000 & 352100) For use with small bone and trauma applications. The rotating end cap gives 

the surgeon great rotating control in the palm of their hand. 


SCREWDRIVERS 

39

SCREWDRIVERS 

BEAM RATCHET DRIVER ASSEMBLY 

HEX POLYAXIAL SCREWDRIVER 

The rotating universal joint allows for screw access in both hard to 

reach areas and “MIS” applications. 

3.5mm Hex Polyaxial Screwdriver 


T20 TORX SCREWDRIVER 

T20 Screwdriver 


NEW! 

NEW! 

40 1-508-238-3351 www.holmed.net 

Hudson Style Beam Ratchet Driver Assembly 


1/4" Square Style Beam Ratchet Driver Assembly mbly 



2.50mm Hex Polyaxial Screwdriver 

Product No. 558000

LARGE POWER GRIP 

This heavy duty type vise grip is perfect for larger scoliosis type cases where rods are difficult to place. 

The unique distal end design will grab the rod very securely and allow the surgeon to rotate a rod for 

optimum alignment with the patient’s spine. 

5.50mm Large Power Grip Product No. 546000 

ROD GRIPPER 

A smaller design than the Large Power Grips, these offer better visibility 

and less cost, but still providing an exceptional grip around the spinal rod. 

1/4" Rod Gripper Product No. 499600 

SCHLEIN TYPE ROD HOLDER 

A smaller design than the Large Power Grips, these offer better visibility and 

less cost, but still providing an exceptional grip around the spinal rod. 

Schlein Type Rod Holder 



P/N 200043 

P/N 200043M 

P/N 200048 

P/N 499100 

P/N 499200 

P/N 499300 

P/N 499400 

P/N 499500 

P/N 499800 

ø 4.75mm 

ø 6.0mm 

ø 6.35mm 


4.50mm Rod Gripper 

3/16" Rod Gripper 





BROAD 

NOSE CLAMP 

Broad Nose Clamp 



RODHOLDERS & VISE GRIPS 

41


ROD HOLDERS 

For use where excellent gripping of spinal rods are required 

without leaving any marks or possible fracture points. Available 

for any size rod. Distal ends may be straight or angled for better 

visibility or leverage. 

3/16" Angled Nose Product No. 100078 

5.5mm Narrow Nose Product No. 608000 


3/16"" Holder Product No. 608100 

1/4" Holder Product No. 608200 

5.50mm Narrow Nose Rodholder with Ratchet 


42 1-508-238-3351 www.holmed.net 

1/4" Straight Nose Product No. 100081S 


3/16" Holder Product No. 100078S 

5.50mm Narrow Nose Non-Ratcheting Rodholder 

Product No. 116000

PIVOT TIPPED ROD FORCEPS 

Perfect for single or two level “MIS” spine fusions. The articulating distal end allows for rod placement 

leaving room for placing setscrews into pedicle screw housings. Visibility is greatly increased over 

conventional c systems and instrumentation. 


NEW! 

5.50mm Pivot Tipped Rod Forcep P/N 655200 

4.5mm Pivot Tipped Angle Rod Forcep 

P/N 655425 


P/N 655600 

P/N 655500 

P/N 655400 

P/N 655300 

P/N 655700 

P/N 655100 

P/N 655000 

P/N 655800 


ROD HOLDING FORCEPS 

For the budget conscious, these low cost alternatives are simple yet effective in placing and holding 

rods for initial tightening of pedicle screws. May also be customized for various screw heads for 

trauma applications where visibility or room constrains the available working channel. 

3.50mm Straight Narrow Nose 

Rod Holding Forcep 

P/N 692200 

5.50mm Rod Holding Forcep 

P/N 692100 









Part of the patented Pivot Tipped Rod 

Forcep product line, this device is 

angled for better visibility and allowing 

for use of other instrumentation in 

difficult to reach areas. 

5.50mm Angled Nose 

Rod Holding Forcep 

P/N 692000 



43

COMPRESSORS & DISTRACTORS 

DISTRACTOR 

(602000) (60 Standard screw distractors are angled on the 

distal en end. Instrument will work with most screw/rod 

systems up to 

6.35mm diameter rods. 

Distractor 


DISTRACTOR 

WITH IN-LINE TIPS 

This in-line version allows for distraction across the 

lamina thus eliminating any pressure or outside force 

applied to the pedicle screw construct. 

Distractor with In-Line Tips 


44 1-508-238-3351 www.holmed.net 

SCREW DISTRACTOR 

This unique instrument will distract a construct directly on 

the screw below the housing without effecting the angulation 

of the screw housing for proper alignment with the rod. 

Screw Distractor 

Product Prod No. 553100 

MIS DISTRACTOR 

Smaller sleeker design for use with most tubular 

or “MIS” retractor systems. 

MIS Distractor 

Product No. 829200

DISTRACTOR WITH 180° ROTATING TIPS 

The adjustable rotating tips allow for creating additional space 

for other instrumentation while distracting the disc space. 


SMALL HOOK DISTRACTOR 

Tips are angled 30° leaving space for other instrumentation. The parallel action 

gives the surgeon better control when distracting against many implant systems. 




45


1/4" ROD COMPRESSORS 

These heavy duty compressors have a parallel action and angled tips 

for better visualization leaving room for additional instrumentation. 

1/4" Rod Compressor 


Small 1/4" Rod Compressor Product No. 604000 

Large 1/4" Rod Compressor Product No. 605000 

46 1-508-238-3351 www.holmed.net


COMPRESSOR 

Simple parallel action with a working range to 54mm. 

Non-Ratcheting Compressor 

Product No. 100062M 

COMPRESSOR WITH 

180° ROTATING TIPS 

The unique rotating tips provide better positioning and 

adjusting for other instrumentation when compressing 

across a pedicle screw construct. 


REVERSE JAW 


COMPRESSOR 

With the jaws reversed, the working 

range is increased to 85mm. 

Reverse Jaw Non-Ratcheting Compressor 


MIS COMPRESSOR 

Created for access through small incisions for single 

and two-level procedures, this small lightweight 

instrument provides stability and yet strong for its size. 



Unique thumb release 



47


RATCHETING ROD COMPRESSORS 

These long thin instruments are designed for 

standard corpectomy procedures. 

48 1-508-238-3351 www.holmed.net 

Small Ratcheting Rod Compressor 


Large Ratcheting Rod Compressor 

Product No.613000 

Medium Ratcheting Rod Compressor 

Product No. 612000

SWIVEL STANDARD 27MM PORT SET 

“MIS” retractor set is designed for fusion type cases of the posterior lumbar spine. The 27mm access port expands 

in a rostral/caudal plane for optimum exposure of the disc space. 

Standard Disc Prep Port Set Product No. 97-1140 

MIS SPINE MINI POSTERIOR PORT SET 

The 18mm “MIS” Port gives simple and effective access to the posterior disc space 

for most decompression type procedures. 

Mini Posterior Port Set Product No. 97-1141 

SEE PAGES 2 AND 3 FOR MORE DETAILS. 



RETRACTORS 

49

RETRACTORS 

ETRACTORS 

MIS SMALL BONE RETRACTORS 

Great for small bone and trauma access. 

50 1-508-238-3351 www.holmed.net 

"GB" Mini-Access Mini-Hohman 45° Retractor 

P/N 303000 

(shown actual size) 

"GB" Mini-Access Mini-Hohman 90° Retractor 

P/N 304000

CEREBELLAR RETRACTORS 

General “Gelpi” type retractors are made of 304 stainless steel and can 

be used for a variety of purposes. 

30° Wide 

Cerebellar Retractor 

P/N 244000 

PHARYNGEAL RETRACTOR 

Pharyngeal Retractor 

P/N 240000 

90° Wide 

Cerebellar Retractor 

P/N 241100 


60° Wide Cerebellar Retractor 

P/N 245000 


RETRACTORS 

51

RETRACTORS 

RETRACTORS 

US Army Style e Retractor 

P/N 482000 2000 

Volkman Style Retractor Retractor 

P/N 481000 

SOFT TISSUE RETRACTORS 

The lower profile and depth of the distal ends make these attractive 

solutions for shorter depth fascia type retraction. 

Medium Soft Tissue Retractor 

P/N 656100 

Small Soft Tissue Retractor 

P/N 656000 

52 1-508-238-3351 www.holmed.net 

Hibbs Style Retractor 

P/N 483000 

Large Soft Tissue Retractor 

P/N 656200

SOFT MALLEABLE RETRACTORS 

Retractor handles can be bent/re-shaped for each case as necessary. 

Retractors also mount on most standard pin-type frames. 

Narrow Width 1.07 

P/N 762100 

Medium Width 1.75 

P/N 762200 

Large Width 2.5 

P/N 762300 


RETRACTORS 

53

RETRACTORS 

LEW'S LEVER SPINAL RETRACTORS 

Designed by George Lewinnek, M.D., these provide a simple and effective shield to protect 

surrounding muscle and tissue while drilling and tapping holes in the pedicles. 

1/2" Diameter Clearance 


ILIAC CREST RETRACTORS 

54 1-508-238-3351 www.holmed.net 

3/4" Diameter Clearance 


While excising bone grafts from the iliac crest, the retractor may be held 

secure by tapping the side pins into bone. 

Product No. 97-1145 Product No. 97-1146

"O" CLAMP 

This patented combo clamp and drill guide allows for great implant plate to bone 

interface for optimum fracture alignment. The small design also allows for less fascia 

trauma and is easy to use. 

#3 Compression Grip 


#2 Slide Button 

#2 Slide Button 

#1 Drill Guide 



TRAUMA 

55

TRAUMA 

WIRE TIGHTENERS 

This uniquely designed product can be used with a variety of wire 

sizes. Use the single or double wrap method. Contact us today 

for an instructional guide. 

Small Wire Tightener 


56 1-508-238-3351 www.holmed.net 

Large Wire Tightener 


A/O CONNECTION HANDLES 

These small delicate type drivers give the surgeon excellent control 

with the palm rotating end caps. 



CABLE PASSER 

The small Ø5.5mm tubing makes these an excellent choice for passing 

cable around bone for trauma type cases and spinal fusion procedures. 

Small Cable Passer Product No. 410000 


clamptite tools 




Large Cable Passer Product No. 411000

HEX POLYAXIAL SCREW DRIVER 

Designed for the most difficult to reach areas, these screwdrivers offer a low cost solution 

to gain access through small incisions or difficult to access anatomy. 

3.5mm Hex Polyaxial Screw Diver P/N 558100 


2.5mm Hex Polyaxial Screw Diver P/N 558000 

DISPOSABLE MINI TORQUE LIMITER 

Product Features 

• Available soon in 3 different sizes to 

accommodate torque requirements 

up 12Nm (106 IN-LBS) 

• Accuracy ±10% up to 100 clicks** 

• Can be designed to accommodate 

different connections** 

• Can be delivered non-sterile 

or delivered packaged/sterile 

• Single Use Only - Cannot be autoclaved 

without resulting in noticeable damage 

** Depending on size and specifications 

Product Benefits 

• Helps avoid the potential use of an out 

of spec torque limiter in multiple cases 

• Eliminates the timely & costly 

process of re-calibration of reusable 

torque limiters 

• Eliminates the repeated autoclave 

process for reusable torque limiters 

• Eliminates and/or reduces the 

chance of infection - Single Use Only 

NEW! EW! 

P/N 36600-XX Small 

P/N 366100-XX Medium 

P/N 366200-XX Large 

(XX = torque value required) 

DISPOSABLE TORQUE LIMITER INSIDE 

TRAY (STERILE PACKAGING) 



TRAUMA 

57

MISCELLANEOUS 

HARRIS / HARF ANTERIOR CERVICAL 

CORPECTOMY / DISCECTOMY SET 

* Hole from drill is absolutely round 

* Hole is straight and not tapered at top of hole 

* Get full purchase between spine and graft with 

a line to line fit of dowel 

* Eliminates migration issues 

58 1-508-238-3351 www.holmed.net 

* Easily reproduceable 

* Allows for multiple graft sources: 

Allograft, Autograft, peek, metal 

* Set is complete and cost effective 

Product Produ No. 697000

PEDICLE MARKERS AND INSERTER 

During imaging the surgeon can easily identify which side of the spine he 

is viewing from an x-ray depending on the solid or the notched type marker. 

Notched Marker 


SOLID PEDICLE MARKER 


NOTCHED PEDICLE MARKER 


Pedicle Marker Inserter 


Solid Marker 


Markers are inserted using 

any standard A/O divers 


MISCELLANEOUS 

MI 

59

MISCELLANEOUS 

PATELLA CLAMP 

Lightweight and low profile makes this clamp a simple solution 

for cementing implants and protecting the patella. 

Patella Clamp Product No. 805200 

K-WIRE REMOVAL INSTRUMENT 

Designed to grasp multiple size “K” wires 

up to 2mm efficiently and with ease. 

K-Wire Removal Instrument Product No. 698000 

60 1-508-238-3351 www.holmed.net 

w.holmed.net

LARGE IMPACT 

MALLET 

Large Impact Mallet 


REVERSE SHOULDER 

GLENOSPHERE FORCEPS 

Reverse Shoulder Glenosphere Forceps 


A single instrument designed to grab 

and hold multiple sizes of implants 

for reverse shoulder arthroplasty 

40° ANGLE DRIVER 

These small angled drivers are designed to withstand up 

to 70 in/lbs of torque for shoulder arthroplasty or spine 

surgery where access is limited. Also provides much better 

visibility over conventional instrumentation. 

40° Angled Driver Product No. 238000 

NEW! 



Distal ends are made of "peek" 

to protect against marring or 

scratching of implants 


MISCELLANEOUS 

61

MISCELLANEOUS 

SOUNDING PROBES 

Supplied with a unique texture on the distal ends, these probes 

give the surgeon the desired “feel” when probing around the 

pedicles and nerve roots. 

BALL HANDLE PEDICLE PROBES 

Available in a variety of configurations, from thin and narrow tips for pediatric surgery, to flat duckbill type 

and Lenke probes for creating access channels for pedicle screws or probing the walls of the disc before 

inserting pedicle screws. 

Narrow Straight 

Ball Handle 

Pedicle Probe 

P/N 344000 

Duckbill Curved 

Ball Handle 

Pedicle Probe 

P/N 342000 


Duckbill Straight 

Ball Handle Pedicle Probe 

P/N 343000 


Narrow Curved Ball 

Handle Pedicle Probe 

P/N 341000 

62 1-508-238-3351 www.holmed.net 

Straight Sounding Probe 316 SS P/N 557000 


Straight Sounding Probe 17-4 PH P/N 557200 

Curved Sounding Probe 316 SS P/N 557400 


Curved Sounding Probe 17-4 PH P/N 557300

MOLDED HANDLE PEDICLE PROBES 

Available in a variety of configurations, from thin and narrow tips for pediatric surgery, to flat duckbill 

type and Lenke probes for creating access channels for pedicle screws or probing the walls of the 

disc for before inserting pedicle screws. 


Molded Handle 

Pedicle Probe 

P/N 331000 


Molded Handle 

Pedicle Probe 

P/N 334000 

Straight Lenke Probe 

P/N 336000 



Molded Handle Pedicle Probe 

P/N 333000 


Narrow Curved 

Molded Handle Pedicle Probe 

P/N 330000 

LENKE PROBES 

Designed with our non-slip silicone handles, 

these industry standard probes are narrow and 

fairly sharp for creating and probing a working 

channel for pedicle screw insertion. 

NEW! 

NEW! 

Curved Lenke Probe 

P/N 337000 

Similar to the straight Lenke type probes, 

the tips of these are curved for greater 

access to the pedicles. 


MISCELLANEOUS 

MISCE 

63

MISCELLANEOUS 

ROD BENDERS 

3mm Rod Bender 

P/N 802 802000 

Simple and effective hand held rod bender 

for Ø3mm cervical rods. 

Rod Bender 

P/N 97-1315 

Designed to bend multiple size spinal rods, 

from 4.75mm to 6.35mm. 

64 1-508-238-3351 www.holmed.net 


3mm/4mm Dual Rod Bender 

P/N 802100 

Designed for where multiple size rod systems are 

available with one instrument. 

NEW! 

Cross Cro Connector Bender 

P/N 893100

ROD PERSUADER 

Simple low cost solution for rod reduction with 

most pedicle screw systems. The fork may be 

customized for optimum fit with screw housing. 

Rod Persuader 

P/N 669000 

ANTI-TORQUE DEVICE 

Designed to work with most pedicle screw systems, 

the lower profile makes this product attractive for 

less invasive procedures. The smaller size also 

provides better visualization of the construct. 

Anti-Torque Device 

P/N 824000 

ROD PUSHER 

Rod Pusher P/N 673000 

4MM HEX SCREWDRIVER VER 

4mm Hex Screwdriver P/N 504100 


MISCELLANEOUS 

65

MISCELLANEOUS 

ROD REDUCTION DEVICE 

Customized for each pedicle screw system, the ratcheting tube will grip the 

housing securely and then reduce the rod into the seat of the housing, thus 

eliminating cross threading and improper tightening of setscrews. The tube 

is cannulated to accept up to a 10mm diameter setscrew or smaller. 

Rod Reduction Device P/N 835000 

NEW! 

TRIAL ROD 

Rods are manufactured factureed 

in soft aluminum 

allowing for easy y bending bend ding to desired 

contour of the sspine 

spine bbefore 

before actual 

bending of the implants. immplannts. 

5mm x 450mm 

Tria Trial al Rod 

P/N 97-1307 

66 1-508-238-3351 www.holmed.net 

P/N 686600 

P/N 686500 

P/N 97-1310 

P/N 885000 

P/N 686400 

P/N 97-1308 

P/N 97-1311 

P/N 97-1312 


3.17mm x 400mm Trial Rod NEW! 

3.5mm x 450mm Trial Rod 





6.00mm Trial Rod 

6.35mm Trial Rod

DISPOSABLE DRILL 

Cost effective 2mm diameter drill 

for cervical and trauma applications. 

Disposable Drill P/N 571000 

BONE TAPS 

Bone taps are designed to provide a more secure e 

channel for inserting pedicle screws. Custom 

threads and sizes available upon request. 

7.00mm Bone Tap P/N 493000 

P/N 495000 

P/N 494000 

P/N 492000 

P/N 491000 


8.50mm Bone Tamp 




BONE AWL 

The sharp narrow tip allows the surgeon 

a quick and easy solution to always 

placing a pedicle screw in the desired 

location regardless of the curvature 

of the spinus process. 

Bone Awl P/N 332000 


MISCELLANEOUS 

67

MISCELLANEOUS 

CORONAL BENDERS 

P/N 747000-XX Coronal Bender Set 

68 1-508-238-3351 www.holmed.net 

P/N 747000-40 

P/N 747000-45 

P/N 747000-50 

P/N 747000-55 

P/N 747000-60 

NEW! 

Available Rod Sizes 

4.0mm Rod Size 




6.0mm Rod Size

MIS MIS (cont'd) 

Product Description P/N PG Product Description 

P/N PG 

4 

130214 3 

97-1137 3 

130215 3 

130213 3 

130225 3 

130216 3 

360° Bevel Swivel Port 

Bayonets 

10° Backward Bend, 3.8mm x 6mm 

10° Backward Bend Oval, 3mm x 5mm 

20° Oval End Cut Gouge, 3mm x 5mm 

90° Ball Probe, 2.5mm dia Tip x 10mm Length 

90° Ball Probe, 1.7mm dia Tip x 8.4mm Length 

Angled Forward Cutting, 3.8mm x 6mm 

Angled Forward Cutting Gouge, 5mm x 8mm 

Curved Ball Probe, 2.5mm dia Tip 

Curved Tip Ball Probe, 1.7mm dia 

Down Cutting Straight, 3mm x 5mm 

Straight, 3.8mm x 6mm 

Penfi eld Probe, Narrow, 3.5mm 

Penfi eld Probe, Narrow, 3mm 

Penfi eld Probe, Wide, 6.6mm 

Straight Left Cutting Teardrop 7.75mm Wide 

Straight Right Cutting Teardrop 7.75mm Wide 

Up Fenestrated Left Cutting Teardrop 7.75mm Wide 

Up Fenestrated Right Cutting Teardrop 7.75mm Wide 

Up Cutting Straight, 3mm x 5mm 

Bayonet Disposable Surgical Blade Holder 

Bayonet Scissors 

Blunt Dissector 

Track Dilators 

Dilator #1 

Dilator #2 

Dilator #3 

Dilator #4 

Dilator #5 

Dilator #6 

Track Dilator #4 – 19mm 

Track Dilator #6 – 27mm 

Dilator Track Sets 

Mini 15 

Mini 18 

Standard 19 

Standard 27 

Disc Spreaders 

3mm Angled 

7mm Angled 

7mm Straight 

9mm Angled 

9mm Straight 

11mm Angled 

11mm Straight 

13mm Straight 

Flex Arm 

Forceps 


2mm Up-biting Disc Forceps 

Disposable Bipolar Forceps 

Re-usable Bipolar Forceps 

Jackson Table Clamp Adaptor 

Lateral Equal Length Blades 

Long 

Medium 

Short 

Lateral Expander Blades 

Long 

Medium 

Short 

Lateral Handle 

Lateral Offset Blades 

Long (Midline) 

Medium (Midline) 

Short (Midline) 

Lateral Rotating Ring 

Lateral Screwdriver 

Light Sources 

Mini Ports 

Standard Port 

Mini Bayonet Set 


MIS Compressor 


Osteotomes 

Curved, 6mm Wide 

Straight, 6mm Wide 

Posterior Cobb Elevator w/Handle 

Posterior Handle 

Posterior Expander Blades 

Long Expander Blade 

Medium Expander Blade 

Short Expander Blade 

97-1801 

97-1818 

97-1819 

97-1811 

97-1823 

97-1802 

97-1812 

97-1810 

97-1822 

97-1820 

97-1803 

97-1809 

97-1821 

97-1808 

97-1804 

97-1807 

97-1806 

97-1805 

97-1817 

804100 

97-1154 

130465 

97-1780 

97-1781 

97-1782 

97-1783 

97-1784 

97-1785 

97-1790 

97-1788 

97-1792 

97-1791 

97-1786 

97-1787 

707213 

707207 

707107 

707209 

707109 

707211 

707111 

707113 

97-1156 

804300 

804200 

97-1153 

97-1253 

910000 

130423 

130422 

130421 

130433 

130432 

130431 

130480 

130812 

130811 

130810 

130460 

130470 

728000 

721000 

97-1144 

721000 

829000 

829200 

812100 

812000 

130265 

97-1134 

130224 

130223 

130222 

7 

6 

6 

7 

6 

7 

7 

7 

6 

6 

7 

7 

6 

7 

7 

7 

7 

7 

6 

8 

15 

2 

11 

11 

11 

11 

11 

11 

11 

11 

11 

11 

11 

11 

10 

10 

10 

10 

10 

10 

10 

10 

12 

8 

8 

15 

15 

12 

2 

2 

2 

2 

2 

2 

2 

2 

2 

2 

2 

2 

15 

15 

6 

15 

13 

13 

14 

14 

3 

3 

3 

3 

3 

Posterior Medium Swivel Port 71mm Blade 

Posterior Rotating Ring 

Posterior Short Long Port 84mm Blade 

Posterior Short Swivel Port 58mm Blade 

Posterior X-Long Expander Blade 

Posterior X-Long Swivel Port 97mm Blade 

Tamps 

Bayonet Oval Tamp, 8mm x16mm 

Round Straight Tamp 

Straight Oval Tamp 8mm x 16mm 

Bayonet Round Tamp, 8mm 

Rod Forcep 

Pivot Tip 3.50mm 









Short Blue Handle 

Short Screw Insert 

Standard Lateral Bayonet Set 

Standard Lateral Port Set 

Sterilization Tray 

Swivel Port Side Pin Option 

Swivel Standard OVOID Lumbar Tray Set 

Swivel Standard OVOID Port, Equal Blades 





Swivel Standard OVOID Port, Offset Blades 





Swivel Standard OVOID Port, Expander Blades 





Cutting Devices 

Product Description 

Curettes 

#0 Straight Cup Curette, 6” Length 



#1 30° Left Serrated Cup, 6” Length 

#1 30° Right Serrated Cup, 6” Length 

#1 Cup Curette, 9” Length 

#1 Oval End Cutting Curette, 6” Length 

#1 Straight Cup Curette, "9 

#1 Serrated Cup, Right, 9” Length 

#1 Serrated Cup, Straight, 9” Length 

#1 Serrated Cup, Left, 9” Length 

#1 Straight Serrated Cup, 6” Length 

#2 Cup Curette, 9” 




#6 Cup Curette. 9” 

10° Backward Bend, 3.8mm x 6mm 

10° Backward Bend Oval, 3mm x 5mm 

15° Angled Osteotome, 9mm x 11mm, 6” 

20° Oval End Cut Gouge, 3mm x 5mm 

30° Left Fenestrated Cup Ring, 6mm x 13mm, 6” 

30° Right Fenestrated Cup Ring, 6mm x 13mm, 6” 

45° Double Sided Rasp, 6mm x 13mm, 6” 

45° Right Modifi ed Rasp, 6mm x 16mm 

90° Ball Probe 2.5mm dia Tip x 10mm Length 

90° Ball Probe 1.7mm dia Tip x 8.4mm Length 

Angled Forward Cutting, 3.8mm x 6mm 

Angled Forward Cutting Gouge, 5mm x 8mm 

Curved Ball Probe 2.5mm dia Tip 

Curved Tip Ball Probe 1.7mm dia 

Down Cutting Straight, 3mm x 5mm 

Penfi eld Probe, 3.5mm, 

Penfi eld Probe, 3mm, Narrow 

Penfi eld Probe, 6.6mm, Wide 

Narrow 

Fenestrated Cup Ring, Straight, 6mm x 13mm, 6” 

Fenestrated Cup Ring Curette, Left, 9” Length 

Holmed Corporation 1-508-238-3351 www.holmed.net 

97-1207 

97-1198 

97-1206 

97-1199 

655600 

655500 

655400 

655300 

655700 

655100 

655000 

655800 

655200 

854200 

853009 

97-1143 

97-1140 

97-1136 

97-2735 

97-3500-50 

97-3500-60 

97-3500-70 

97-3500-80 

97-3501-50 

97-3501-60 

97-3501-70 

97-3501-80 

97-3502-50 

97-3502-60 

97-3502-70 

97-3502-80 

P/N 

97-1414 

97-1413 

97-1412 

97-1465 

97-1466 

97-1592 

97-1467 

97-1435 

97-1485 

97-1484 

97-1486 

97-1464 

97-1436 

97-1418 

97-1419 

97-1420 

97-1440 

97-1801 

97-1818 

97-1468 

97-1819 

97-1462 

97-1463 

97-1422 

97-1442 

97-1811 

97-1823 

97-1802 

97-1812 

97-1810 

97-1822 

97-1820 

97-1809 

97-1821 

97-1808 

97-1809 

97-1461 

97-1482 

14 

14 

14 

14 

9 

9 

9 

9 

9 

9 

9 

9 

9 

3 

3 

7 

2 

15 

4 

5 

5 

5 

5 

5 

5 

5 

5 

5 

5 

5 

5 

5 

PG 

22 

22 

22 

21 

21 

23 

21 

22 

23 

23 

23 

21 

22 

22 

22 

22 

22 

20 

20 

21 

20 

21 

21 

21 

23 

20 

20 

20 

20 

20 

20 

20 

20 

20 

20 

20 

21 

23 

INDEX 

69

INDEX 

70 

Cutting Devices (cont'd) Screwdrivers (cont'd) 


P/N PG 

Curettes 

Fenestrated Cup Ring Curette, Right, 9” Length 97-1483 

Nerve Hook Retractor, 5mm 

97-1825 

Ring Curette, 7mm, 9” Length 

97-1494 

Ring Curette, 5mm, 9” Length 

97-1443 

Size 1 Curette, 9” Len 

97-1475 

Size 4/0 Curette, 9” 

97-1444 

Spatula Dissector, 3.8mm Wide 

97-1639 

Straight, 3.8mm x 6mm 

97-1803 

Straight Left Cutting Teardrop,7.75, Wide 

97-1804 

Straight Right Cutting Teardrop, 7.75, Wide 

97-1807 

Up Cutting Straight, 3mm x 5mm 

97-1817 

Up-biting Disc Forceps, 2mm 

804200 

Up Fenestrated Left Cutting Teardrop, 7.75mm, Wide 97-1806 

Up Fenestrated Right Cutting Teardrop, 7.75mm, Wide 97-1805 

Cobb Elevator 

19mm, 6” Length 

97-1491 

25mm 6” Length 

Kerrison 

97-1492 

Curved Tip, 3mm 

804100 

Narrow, 2mm 

691410 

Handheld Rod Deburrer 

Handles 

658000 

Long Black, 10” 

855100 

Long Blue, 10” 

855200 

Long Green, 10” 

855000 

Short Black, 10” 

854100 

Short Blue, 10” 

854200 

Short Green, 10” 

854000 

Short Metal, 10” 

853025 

Mini Bayonet Set 

Osteotomes 

97-1144 

Curved, 9mm, 9” Length 

97-1488 

Straight 9mm x 11mm, 6”Length 

97-1516 

Curved, 6mm, Wide 

812100 

Straight, 6mm, Wide 

812000 

9mm Straight Osteotome, 6” 

97-1516 

Plate & Rod Cutter, 3.5mm Rods 

Quick Connect Rod Deburrers 

149000 

1/4” Square Connect 

658100 

Hudson Connect 

658200 

Zimmer Connect 

Rod Cutter Cartridges 

658300 

3.3mm 

97-1045 

5.0mm 

97-1046 

5.5mm 

97-1044 

6.0mm 

97-1048 

7.0mm 

Rod Cutters 

97-1049 

In-Situ Rod Cutter, 3.2mm 

197300 


197000 


197350 

Non-Racheting, 5.5mm 

147500 

Ratcheting Lightweight Handheld, 3.5mm 

150000 

w/Depth Gauge, 1/4” 

860000 

Table-Top Ratcheting, 5.50mm 

158000 

Universal Rotary Rod Cutter 

97-1060 

Standard Disc Prep Bayonet Set 

97-1143 

Straight Disc Forceps, 2mm 

804300 

TLIF Set 

770100 

Torque Devices 

Product Description P/N PG 

Disposable Mini Torque Limiter 

Small 

Medium 

Large 

Hex Torque Indicator, 4mm, 4Nm 

In-Line Dial Torque Measure, 55 lbf-in, 1/4” Q.C. 

In-Line Disk Torque Measure, 55 lbf-in, 1/4” Q.C. 

In-Line Torque Limiter 

Slim Line Torque Indicators 

Torque Limiter, Hudson Style Q.C. 




Torque Limit Device, 5mm Hex Tip,106 Lbf/in (12Nm) 

Torque Limit Device, 3mm Hex Tip, 27 Lbf/in (3Nm) 

Torque Limit Device, 4mm Hex Tip ,71 Lbf/in (8Nm) 

T-Handle Disk Torque Measure Device, 120 lbf-in, 1/4” Q.C. 

T-Handle Torque Limiter 

Screwdrivers 

36600-XX 

366100-XX 

366200-XX 

370000 

584100 

584000 

459300-XX 

367000-XX 

595100-XXX 

560000-XX 

561000-XX 

570000-XXX 

307000 

306000 

308000 

586000 

459500-XX 

Product Description 

1/4” Square Q.C., Ratcheting Drivers 

P/N PG 

23 

20 

23 

23 

23 

23 

20 

20 

20 

20 

20 

19 

20 

20 

21 

21 

19 

19 

18 

25 

25 

25 

25 

25 

25 

25 

20 

23 

21 

18 

18 

23 

17 

18 

18 

18 

17 

17 

17 

17 

17 

17 

17 

17 

16 

16 

17 

16 

17 

20 

19 

21 

28 

28 

28 

29 

29 

29 

26 

29 

27 

27 

27 

27 

27 

27 

27 

29 

26 

1/4” Square Q.C., Ratcheting Drivers (cont'd) 

T-Handle, Black 


T-Handle, Blue 

Palm Handle, Blue 

Small Handle, Blue 

Medium Handle, Blue 

Large Handle, Blue 

1/4” Square Q.C., Non-Ratcheting Drivers 

Palm Handle, Black 



1/4” Square Q.C., Push T-Handle 

A/O Connection, Brown Phenolic Handle 6.2” Long 

A/O Connection, Mini Blue Handle 

A/O Quick Connect, Push T-Handle 

A/O Q.C. Ratcheting Drivers 



A/O Q.C., Non-Ratcheting Divers 





A/O Pull Style Q.C., Ratcheting Drivers 

Large Handle, Green 


Medium Handle, Green 


Beam Ratchet Driver Assembly, 1/4” Square Style 

Beam Ratchet Driver Assembly, Hudson Style 

Extended A/O Style Quick Connect T-Handle 

Hex Polaxial Screwdrivers 

2.5mm 

3.5mm 

Hudson Q.C., SS T-Handle 

Hudson Style Q.C., Non-Ratcheting Drivers 


Medium Handle, Black 




Palm Handle, Light Blue 


Palm Handle, Green 

Hudson Style Q.C., Ratcheting Drivers 



Large Handle, Black 




Mini-Zimmer Q.C., Ratcheting Drivers 


Medium Handle 

Small Handle 

Large Handle 

Square Q.C. Extender 

Square Adapter 

T20 Torx Screwdriver 

Zimmer Q.C., Ratcheting Drivers 





Rod Holder & Vice Grips 

Angled Rod Holder 3/16” 

Angled Rod Holding Forcep 5.50mm 

Broad Nose Clamp 

Large Power Grips 

4.75mm 

5.50mm 

6.35mm 

6.00mm 

Rod Forceps 

Angle Rod Forcep 4.50mm 

Pivot Tipped 3.50mm 








256000 

733200 

733100 

164300 

164200 

164100 

164500 

259000 

259100 

736000 

628000 

352100 

350000 

562000 

165300 

165200 

135000 

133000 

736500 

733500 

165600 

165400 

165500 

165100 

710500 

710000 

562100 

558000 

558100 

679000 

233000 

262300 

362200 

362500 

362600 

127200 

127100 

127000 

162300 

733000 

162500 

162400 

162100 

162200 

163300 

163100 

163200 

163400 

693000 

695000 

538000 

166400 

166400 

166100 

166200 


100078 

692000 

657000 

200043 

546000 

200048 

200043M 

655425 

655600 

655500 

655400 

655300 

655700 

655200 

655100 

31 

37 

37 

31 

31 

31 

31 

31 

31 

31 

38 

39 

39 

38 

36 

36 

36 

36 

37 

37 

36 

36 

36 

36 

40 

40 

38 

40 

40 

38 

33 

33 

33 

33 

33 

33 

33 

33 

32 

32 

32 

32 

32 

32 

35 

35 

35 

35 

39 

39 

40 

35 

34 

34 

34 

42 

43 

41 

41 

31 

41 

41 

43 

43 

43 

43 

43 

43 

43 

43

Rod Holder & Vice Grips (cont'd) Trauma (cont'd) 


P/N PG 

Rod Forceps (cont'd) 



Rod Grippers 

1/4” 

3/16” 

4.50mm 

5.00mm 

5.50mm 

6.00mm 

6.50mm 

Rod Holding Forceps 

Straight 5.50mm 

Straight Narrow 3.50mm 

Rod Holders 

1/4” Narrow Nose 

1/4” Straight Nose 

3/16” Narrow Nose 

3/16” Straight Nose 

5.5mm Narrow Nose 

Narrow Nose, Non-Ratchet 

Narrow Nose, Ratchet 

Schlein Type Rodholder 

Compressors & Distractors 

Compressor with 180° Degree Rotating Tips 

Distractor 

Distractor with 180° Degree Rotating Tips 

Distractor with In-Line Tips 

MIS Compressor 


Non-Ratcheting Compressor 

Ratcheting Rod Compressors 

Large 

Medium 

Small 

Reverse Jaw Non-Ratcheting Compressor 

Rod Compressors 

1/4” 

1/4” Large 

1/4” Small 

Screw Distractor 

Small Hook Distractor 

Cerebellar Retractors 

30° Wide 

60° Wide 

90° Wide 

“GB” Mini-Access Mini_Hohman 45° Retractor 

“GB” Mini-Access Mini_Hohman 90° Retractor 

Hibbs Style Retractor 

Illiac Crest Retractor 

Illiac Crest Retractor 

Lew’s Lever Spinal Retractors 

1/2” Diameter Clearance 

3/4” Diameter Clearance 


Pharyngeal Retractor 

Soft Malleable Retractors 

Medium Width 1.75" 

Narrow Width 1.07" 

Wide Width 2.5" 

Soft Tissue Retractors 

Large 

Medium 

Small 

Standard Disc Prep Port Set 

US Army Style Port Retractor 

Volkman Style Retractor 


Hex Polaxial Screwdriver, 2.5mm 

Hex Polaxial Screwdriver, 3.5mm 

Cable Passer, Large 

Cable Passer, Small 

Disposable Mini Torque Limiters 

Small 

Medium 

Large 

“O” Clamp 

655000 

655800 

499600 

499200 

499100 

499300 

499400 

499500 

499800 

692100 

692200 

608000 

100081S 

608100 

100078S 

608000 

116000 

114000 

100225 


Retractors 

119000 

602000 

118000 

553300 

828000 

829200 

100062M 

613000 

612000 

611000 

107000 

600000 

605000 

604000 

553100 

579000 


Trauma 

244000 

245000 

241100 

303000 

304000 

483000 

97-1145 

971146 

618000 

618100 

97-1141 

240000 

762200 

762100 

762300 

656200 

656100 

656000 

97-1140 

482000 

481000 


352100 

558000 

558100 

411000 

410000 

36600-XX 

366100-XX 

366200-XX 

435000 

43 

43 

41 

41 

41 

41 

41 

41 

41 

43 

43 

42 

42 

42 

42 

42 

42 

42 

42 

47 

44 

45 

44 

47 

44 

47 

48 

48 

48 

47 

46 

46 

46 

44 

45 

51 

51 

51 

50 

50 

52 

54 

54 

54 

54 

49 

51 

53 

53 

53 

52 

52 

52 

49 

52 

52 

56 

57 

57 

56 

56 

57 

57 

57 

55 

Wire Tightener, Large 

Wire Tightener, Small 


4mm Hex screwdriver 

40° Angle Driver 

Anti-Torque Device 

Bone Awl 

Bone Taps 

5.50mm 

6.25mm 

7.00mm 

7.75mm 

8.50mm 

Coronal Bender Set 

Coronal Benders 

4.0mm 

4.5mm 

5.0mm 

5.5mm 

6.0mm 

Cross Connector Bender 

Drill, Disposable 

Dual Rod Bender, 3mm/4mm 

Harris/Harf Anterior Cervical Corpectomy/Disectomy Set 

K-Wire Removal Instrument 

Large Impact Mallet 

Lenke Probes 

Straight 

Curved 

Notched Marker 

Notched Pedicle Marker 

Patella Clamp 

Pedicle Marker Inserter 

Pedicle Probes, Ball Handle 



Narrow Curved 


Pedicle Probes, Molded Handle 



Narrow Curved 




Rod Bender 

Rod Bender, 3mm 

Rod Persuader 

Rod Pusher 

Rod Reduction Device 

Solid Marker 

Solid Pedicle Marker 

Sounding Probes 

Curved 17-4 PH 

Curved 316 SS 

Straight 17-4 PH 

Straight 316 SS 

Trail Rods 

3.17mm X 400mm 

3.5mm X 450mm 

4.75mm X 450mm 

5mm X 450mm 

5.5mm X 200mm 

5.5mm X 400mm 

5.5mm X 450mm 

6.0mm 

6.35mm 

784100 

784000 

350000 

56 

56 

56 

Miscellaneous 


504100 

238000 

824000 

332000 

491000 

492000 

493000 

494000 

495000 

747000-XX 

747000-40 

747000-45 

747000-50 

747000-55 

747000-60 

893100 

571000 

802100 

697000 

698000 

812500 

336000 

337000 

664100 

569002 

805200 

663000 

342000 

343000 

341000 

344000 

333000 

334000 

330000 

331000 

809200 

809000 

97-1315 

802000 

669000 

673000 

835000 

664000 

569001 

557300 

557400 

557200 

557000 

686600 

686500 

97-1310 

97-1307 

885000 

686400 

97-1308 

97-1311 

97-1312 


Call: 1-508-238-3351 

Email: 


or Visit: www.holmed.net 


65 

61 

65 

67 

67 

67 

67 

67 

67 

68 

68 

68 

68 

68 

68 

64 

67 

64 

58 

60 

61 

63 

63 

59 

59 

60 

59 

62 

62 

62 

62 

63 

63 

63 

63 

61 

61 

64 

64 

65 

65 

66 

59 

59 

62 

62 

62 

62 

66 

66 

66 

66 

66 

66 

66 

66 

66 

INDEX 

71

HOLMED 

APPRO ED 


Worldwide Provider - Quality Products - Personalized Service 

40 Norfolk Avenue, South Easton, MA 02375 


1-508-238-3351 



Current Certifi cations Include: 

FDA Registration 

ISO 13485 

ISO 9001:2000 

"CE" Mark Certifi cation 

Certifi cate to Export to Foreign Governments 

TESTED TO HIGHER STANDARDS

SURGICAL INSTRUMENTS - Holmed Corporation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?