DRAW-TITE CUSTOMBUILT TRAILER HITCHES

SPECIALTY HITCHES AND STEP BUMPER HITCHES
MULTI-FIT MOTORHOME HITCHES
STEP BUMPER HITCHES
2595
2596
1120
1922
1923
• Simple three-piece construction makes assembly and installation fast and easy. No welding
required. Attachment hardware included.
• 2” receiver tube accepts all standard utility ball mounts, providing ball height adjustment for level
towing.
MAXIMUM GTW
WT. CAR. WT. DIST.
PART NO. GTW/TW GTW/TW DESCRIPTION
5350 5,000/500 6,000/750 For motorhomes w/chassis 24” to 46” wide.
Caution: This is a general application product and it is the responsibility of the installer to select a
structurally safe location for attachment.
• All Draw-Tite bumper hitches meet or exceed V.E.S.C. and V-5 regulatory standards.
• Ball platform ìdrop” ranges from 4” to 6”.
• Receiver Style Step Bumper Hitches 2595 are boxed and come standard with removable zinc
drawbar, pin & clip and tube cover.
Frame Hitch Style Step Bumper Hitches
MAXIMUM FINISH RECEIVER BALL
PART GTW RECEIVER OPENING HOLE
NO. DESCRIPTION (LBS.) DRAWBAR SIZE DIA. DROP LENGTH
2595 Step Bumper Hitch 3,500/300 Black/Zinc 1 1/4” 3/4” 4 1/2” 5 1/16”
(Frame Hitch Style) Square
2596 Step Bumper Hitch 3,500/300 Black/Zinc 1 1/4” 3/4” 6” 5 1/16”
(Frame Hitch Style) Square
Fixed Drawbar Style
MAXIMUM FINISH BALL
PART GTW RECEIVER HOLE
NO. DESCRIPTION (LBS.) DRAWBAR DIA. DROP LENGTH
1120* Step Bumper Hitch 2,000/200 Zinc 3/4” 4” 3”
1922* Step Bumper Hitch 3,500/300 Zinc 1” 4” 4”
1923* Step Bumper Hitch 3,500/300 Zinc 1” 6” 4”
21529** Step Bumper Hitch 2,000/200 Zinc 3/4” 4” 3”
(For factory installed bumpers only).
88-89 Chevy & GMC Full Size
Pickup, 92-98 Chevy & GMC
Suburban 92-98 Chevy Blazer/Tahoe
(Full Size), 92-98 GMC Yukon
NOTE: Order hitch ball separately. All bumper hitches are limited by their rating as noted or the vehicle
bumper rating, whichever is lower. May require bumper reinforcement. Do not use for horse trailers
*May not fit all bumpers. Will not fit 1988 and later Chevy/GMC pickups. Use 21529 Class I hitch.
**Uses existing holes. No drilling required. Provides 4” drop from bumper platform.
Spotting Hitch
Mounts easily to the front bumper using license plate holes. Especially suited to boat trailer maneuvers
where trailer positioning is often difficult.
MAXIMUM FINISH BALL
PART GTW RECEIVER HOLE
NO. DESCRIPTION (LBS.) DRAWBAR DIA. DROP LENGTH
1290 Spotting Hitch 2,000/200 Zinc 3/4” - 3”
82