NS7 Reference Manual - v1.1 - Numark
NS7 Reference Manual - v1.1 - Numark NS7 Reference Manual - v1.1 - Numark
SOFTWARE INSTALLATION Free updates to the Serato ITCH software are available online at http://www.serato.com/itch. We recommend checking the website for the latest update of Serato ITCH before installing it on your computer. WINDOWS (XP & VISTA) 1. IMPORTANT: Do NOT connect the NS7 to your PC before you are prompted to do so. The installer will prompt you to connect it at the appropriate time. 2. Insert the included software CD into your computer’s CD-ROM drive. An installation "wizard" will appear. (If it does not appear, open the contents of the software CD and double-click the “ITCH_Installer.exe” file.) 3. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the NS7 to your computer. Throughout the installation: if Windows warns you that any of the drivers' certificates cannot be verified, approve them anyway. if Windows warns you that the hardware installation was not successful or may not work properly, ignore it. if you see any dialog boxes flash briefly on the screen before disappearing, ignore them. These warnings are normal and are simply Windows' reaction to the cancellation of its own hardware installer. (NS7 and Serato ITCH use their own installation processes.) If you selected the default location during the installation process, you can find the program in the following location: XP: Start Menu Programs ITCH Vista: Windows Menu All Programs Serato ITCH MAC 1. Insert the software CD (included) into your computer’s CD-ROM drive. 2. Open the contents of the software CD in your computer. 3. Double-click the ITCH Installer file. 4. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the NS7 to your computer. If you selected the default location during the installation process, you can find the program in your Applications folder. CONNECTING THE NS7 1. Connect any optional input sources (microphones, turntables, CD players, etc.) to NS7. 2. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to NS7. 3. Plug all devices into power supply, and turn on devices in proper order: a. When starting a session, turn devices on in this order: (1) auxiliary input sources, (2) NS7, (3) output devices b. When ending a session, reverse this operation by turning off: (1) output devices, (2) NS7, (3) auxiliary input sources 4. Connect NS7 to your computer with the USB cable (included) and to your headphones. 5. Start Serato ITCH and go! 3
CONNECTION DIAGRAM COMPUTER MICROPHONE OR BACK FRONT CD PLAYER 4 HOUSE AMP BOOTH AMP OR HEADPHONES
- Page 1 and 2: REFERENCE MANUAL
- Page 3 and 4: MIXING WITH THE NS7................
- Page 5: PLATTER ASSEMBLY 1. Remove NS7 from
- Page 9 and 10: TOP PANEL OVERVIEW 32 33 34 18 36 3
- Page 11 and 12: 26. MODE - Press this to switch bet
- Page 13 and 14: Showing Your iTunes Library: Serato
- Page 15 and 16: 13. Record: Starts or stops recordi
- Page 17 and 18: LIBRARY Show iTunes Library: When
- Page 19 and 20: Browse To browse through your files
- Page 21 and 22: MIXING WITH THE NS7 PLAYING YOUR FI
- Page 23 and 24: Main Waveforms This view provides a
- Page 25 and 26: USING PITCH / TEMPO CONTROLS The fo
- Page 27 and 28: RECORDING Serato ITCH can capture r
- Page 29 and 30: UPDATING THE FIRMWARE Occasionally,
- Page 31 and 32: 6. Set all faders and knobs to the
- Page 33 and 34: TROUBLESHOOTING PROBLEM CAUSE SOLUT
- Page 35: www.numark.com
SOFTWARE INSTALLATION<br />
Free updates to the Serato ITCH software are available online at http://www.serato.com/itch. We recommend checking the website<br />
for the latest update of Serato ITCH before installing it on your computer.<br />
WINDOWS (XP & VISTA)<br />
1. IMPORTANT: Do NOT connect the <strong>NS7</strong> to your PC before you are prompted to do so. The installer will prompt you to connect it<br />
at the appropriate time.<br />
2. Insert the included software CD into your computer’s CD-ROM drive. An installation "wizard" will appear. (If it does not appear,<br />
open the contents of the software CD and double-click the “ITCH_Installer.exe” file.)<br />
3. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the<br />
<strong>NS7</strong> to your computer. Throughout the installation:<br />
if Windows warns you that any of the drivers' certificates cannot be verified, approve them anyway.<br />
if Windows warns you that the hardware installation was not successful or may not work properly, ignore it.<br />
if you see any dialog boxes flash briefly on the screen before disappearing, ignore them.<br />
These warnings are normal and are simply Windows' reaction to the cancellation of its own hardware installer. (<strong>NS7</strong> and Serato<br />
ITCH use their own installation processes.)<br />
If you selected the default location during the installation process, you can find the program in the following location:<br />
XP: Start Menu Programs ITCH<br />
Vista: Windows Menu All Programs Serato ITCH<br />
MAC<br />
1. Insert the software CD (included) into your computer’s CD-ROM drive.<br />
2. Open the contents of the software CD in your computer.<br />
3. Double-click the ITCH Installer file.<br />
4. Follow the instructions on the screen to begin the installation process. During this process, you will be prompted to connect the<br />
<strong>NS7</strong> to your computer.<br />
If you selected the default location during the installation process, you can find the program in your Applications folder.<br />
CONNECTING THE <strong>NS7</strong><br />
1. Connect any optional input sources (microphones, turntables, CD players, etc.) to <strong>NS7</strong>.<br />
2. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to <strong>NS7</strong>.<br />
3. Plug all devices into power supply, and turn on devices in proper order:<br />
a. When starting a session, turn devices on in this order: (1) auxiliary input sources, (2) <strong>NS7</strong>, (3) output devices<br />
b. When ending a session, reverse this operation by turning off: (1) output devices, (2) <strong>NS7</strong>, (3) auxiliary input sources<br />
4. Connect <strong>NS7</strong> to your computer with the USB cable (included) and to your headphones.<br />
5. Start Serato ITCH and go!<br />
3