Trapped Moisture Ventilating System HP60 - Injectidry

Trapped Moisture Ventilating System HP60 - Injectidry Trapped Moisture Ventilating System HP60 - Injectidry

injectidry.com
from injectidry.com More from this publisher

Patents US5893216, 6647639<br />

Patents US5893216, 6647639<br />

<strong>Trapped</strong> <strong>Moisture</strong><br />

<strong>Ventilating</strong> <strong>System</strong><br />

Patents US5893216, 6647639<br />

Patents US5893216, 6647639<br />

<strong>HP60</strong><br />

Patents US5893216, 6647639<br />

Patents US5893216, 6647639


NEW plug receptacle design<br />

<strong>HP60</strong><br />

Base only<br />

HP-60-BO


NEW plug and cord design


Wall & Ceiling<br />

Basic Package<br />

WCB


<strong>HP60</strong><br />

Wall & Ceiling<br />

Drying<br />

Package<br />

INJ01


<strong>HP60</strong><br />

Floor Drying<br />

Package<br />

<strong>HP60</strong>FDP


PRV<br />

Main Air Out


QC W<br />

PTMA<br />

PRV & Filter<br />

Main Air IN AMIH


HP Quick Connect Main W QC02


Unscrew clear filter lid to open for cleaning


Remove screen for cleaning


se pressurized air to clean filter screen


CLOSE TO PROTECT BLOWER


HP 60 Accessories<br />

• Interceptor (HEPA Filter)<br />

• Water Separator<br />

• Silencer<br />

• Vac-It Panels


Water Separator<br />

Interceptor<br />

Silencer


Water Separator<br />

Interceptor<br />

Interceptor<br />

Silencer<br />

HEPA FILTER SYSTEM (Replacement filters available)


Debris ingested into blower invalidates warranty


Water Separator<br />

Water Separator<br />

Interceptor<br />

Silencer<br />

Temporarily used to collect water that remains after bulk water has been removed


Water damaged blower


New Silencer<br />

Should be elevated from surfaces that could be damaged by heat


• 8 point<br />

• Multi-Port<br />

• Small- Single Port<br />

• U Panel<br />

• Clear<br />

Vac-It Panels<br />

Patent # US6886271


Vac-It Panel Variety Package


QCEP01<br />

VAC T shown on Center Port<br />

VACITPA-MPUK<br />

VACITPA-8<br />

RP2<br />

VACITPA-CL<br />

VACITPA-MP<br />

Assortment of all Panels in the VACITPA-VP


8 Point Vac-It Panel<br />

8 Point Vac-It Panel


8 point panel<br />

cut in eighths


Multi Port Vac-It Panel


U Shaped Vac-It Panel<br />

Fit perfectly around toilets, pedestal sinks and doorways


Clear Vac-It Panel


Drying with negative pressure<br />

(suction)


Before bulk water is removed


After bulk water is removed


Using the Water Separator temporarily to remove<br />

any remaining water


Drying Hardwoods using the <strong>HP60</strong>, Eight Point,<br />

Multiport Panels, the Interceptor and the Silencer


Panels should have more spacing.


Yes they will work on marble, pulling moisture through the<br />

grout. Works best with infrared heat from crawl or basement.


Drying with positive pressure


Drying sub layers with positive pressure.


Drying walls with positive pressure


Drying ceilings with positive pressure

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!