Legacy® PLUS - Smiths Medical

More documents

Recommendations

Info

Reference Section 5: Reference 3. Secure the slide clamp as close to the extension set Luer lock connector as possible. This should assure a minimum water loss from the tubing when the syringe is removed. 4. Weigh the entire Medication Cassette Reservoir/extension set and record the weight. This is the predelivery weight. (This weight includes the empty Medication Cassette Reservoir, extension set, and weight of the water.) 5. Attach the cassette to the pump. Program the Reservoir Volume to 20 ml. Now press ¤. This value is the intended delivery volume. (1 ml of water at 20°C weighs 1 gram.) Remove the slide clamp. 6. With the pump in Lock Level 0, program a Continuous Rate of 125 ml/hr. Start the pump and wait for the reservoir volume empty alarm. The pump will deliver 20 ml. 7. Again, secure the slide clamp as close as possible to end of the extension set Luer lock connector. Remove the cassette from the pump and weigh the entire Medication Cassette Reservoir/extension set assembly. This is the postdelivery weight. 8. Calculate the difference in weight between the predelivery weight and the postdelivery weight. This is the weight of the amount delivered. 9. Find the difference between the volume of the amount delivered and the intended delivery volume. This is the inaccuracy volume. 10. Divide the inaccuracy volume by the intended delivery volume and multiply by 100. This is the accuracy error percentage. 11. If the accuracy error percentage is greater than ± 6%, repeat the test with a new Medication Cassette Reservoir. If the pump fails a second time, call Smiths Medical MD, Inc. or Smiths Medical International Ltd.
Example: Predelivery Weight: 61.1 g Postdelivery Weight: – 41.6 g Weight of Amount Delivered: = 19.5 g Volume of Amount Delivered: 19.5 ml Intended Delivery Volume: – 20.0 ml Inaccuracy Volume: = –0.5 ml Inaccuracy Volume: –0.5 ml Intended Delivery Volume: ÷ 20.0 ml Accuracy Error: = –0.025 Accuracy Error: -0.025 × 100.00 Accuracy Error Percentage: = –2.5% Section 5: Reference Reference
Page 1 and 2:
Legacy Operator’s Manual CADD-Leg
Page 3 and 4:
Read this entire Operator’s Manua
Page 5 and 6:
• Do not use rechargeable NiCad o
Page 7 and 8:
• Do not expose the pump to humid
Page 9 and 10:
Table of Contents Warnings iii Caut
Page 11 and 12:
1.0 General Description Section 1:
Page 13 and 14:
Symbols O Direct Current (Power Jac
Page 15 and 16:
Section 1: General Description Desc
Page 17 and 18:
Section 1: General Description WARN
Page 19 and 20:
Lock Levels Section 1: General Desc
Page 21 and 22:
2.0 Pump Setup and Programming Inst
Page 23 and 24:
Section 2: Pump Setup and Programmi
Page 25 and 26:
Page 27 and 28:
Changing to Lock Level 0 (LL0) Sect
Page 29 and 30:
Delivery Methods Section 2: Pump Se
Page 31 and 32:
Page 33 and 34:
Programming Continuous Delivery Sec
Page 35 and 36:
Page 37 and 38:
KVO Rate Section 2: Pump Setup and
Page 39 and 40:
Programming Intermittent Delivery S
Page 41 and 42: • Press „. 11. Verify the Upstr
Page 43 and 44: Attaching a Cassette Section 2: Pum
Page 45 and 46: Section 2: Pump Setup and Programmi
Page 49 and 50: Setting the Lock Level for the Pati
Page 53 and 54: 3.0 Operating the Pump Starting the
Page 55 and 56: 4.0 Biomed Functions Overview: Acce
Page 57 and 58: Upstream Sensor On/Off Section 4: B
Page 59 and 60: 5.0 Reference Messages and Alarms,
Page 61 and 62: Section 5: Reference Messages and A
Page 63 and 64: Cleaning the Pump and Accessories S
Page 65 and 66: Section 5: Reference Exposure to Ra
Page 67 and 68: Section 5: Reference IEC 61000-4-4
Page 69 and 70: Section 5: Reference System Deliver
Page 71 and 72: Biomed Functions Air Detector .....
Page 73 and 74: Flow rate: Minimum Time Interval: 1
Page 75 and 76: Section 5: Reference WARNING: The P
Page 77 and 78: Recommended separation distances be
Page 79 and 80: Section 5: Reference the motor driv
Page 81 and 82: Data Handling Software Safety Featu
Page 83 and 84: Mechanical Inspection Section 5: Re
Page 85 and 86: Section 5: Reference • Press and
Page 87 and 88: Upstream Occlusion Sensor Test Sect
Page 89 and 90: Occlusion Pressure Range Test II De
Page 91: Accuracy Tests Gravimetric Accuracy
Page 95 and 96: Section 5: Reference 5. Program a C
Page 97 and 98: indicator light, 4 inspection proce
Page 99 and 100: E. Computer Program License: Sectio
show all

Legacy® PLUS - Smiths Medical

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?