Legacy® PLUS - Smiths Medical

Operating
the Pump
Section 3: Operating the Pump
Turning the Pump On/Off
When the pump is stopped, you may put the pump into a low power state
by turning it off. The pump may be turned off when it is disconnected
from the patient and it is going to be stored for short periods of time.
CAUTION: Do not store the pump for prolonged periods of time with
the batteries installed. Battery leakage could damage the pump.
To turn the pump off
• Press and hold Å.
Three sets of dots will appear one-by-one on the pump’s display,
each accompanied by a single beep.
To turn the pump on
• Press and hold Å. The pump will power up and automatically
review all screens.
Resetting the Reservoir Volume
To reset the Reservoir Volume to the value programmed in LL0, the
pump may be in any lock level.
1. Stop the pump.
2. Press „ to display the Reservoir Volume screen.
3. Press ¤ to reset the volume to the programmed value.