Legacy® PLUS - Smiths Medical
Legacy® PLUS - Smiths Medical
Legacy® PLUS - Smiths Medical
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section 2: Pump Setup and Programming<br />
Inserting the Tubing into the Air Detector<br />
WARNING: When the Air Detector is turned off, the pump will not<br />
detect air in the fluid path. Periodically inspect the fluid path and<br />
remove any air to prevent air embolism. Air embolism could result in<br />
death or serious injury to the patient.<br />
(See Section 4, Biomed Functions, for instructions on how to turn the air<br />
detector on and off.)<br />
1. If the Air Detector is in use, make a small loop of tubing underneath<br />
the air detector and hold it with your thumb.<br />
2. Place the tubing over the groove in the air detector and tuck it<br />
under the catch.<br />
Catch<br />
Pump Setup &<br />
Programming