Legacy® PLUS - Smiths Medical

General
Description
Section 1: General Description
Downstream Occlusion Sensor: The pump contains a downstream occlusion
sensor. When a downstream occlusion (between the pump and
patient access site) is detected, an alarm will sound, delivery will stop,
and the display will show “High Pressure.”
Reservoir Volume Alarm: The Reservoir Volume alarm indicates when
the fluid in the fluid container is low or depleted. Each time you change
the fluid container, you may reset the Reservoir Volume to the originally
programmed volume. Then, as medication is delivered, the Reservoir
Volume automatically decreases. When the pump calculates that 5 ml
remain in the fluid container, beeps sound and “ResVol Low” appears on
the main screen. This alarm recurs at every subsequent decrease of 1 ml
until the Reservoir Volume reaches 0 ml, at which point the pump stops
and the Reservoir Volume empty alarm sounds.
The Main Screen
The main screen is the starting point for programming or viewing the
pump’s settings.
If no keys are pressed for a period of time (2 minutes), the display reverts
to the main screen. When the two AA batteries are low, “LowBat”
appears on the main screen.
When running:
Status of pump
Reservoir
Volume
When stopped:
Status of pump
RUN LowBat
ResVol 50.0 ml
STOPPED
Battery Status
Status of
Reservoir
Volume