ESL Wet Floor Formers - Pressalit A/S

ESL Wet Floor Formers
Materials
Manufactured from toughened Glass-
Reinforced Plastic (GRP) for strength and
durability, whilst also being light and easy
to install.
Load
Details
Stainless steel drain cover.
Stylish, high quality finish, positioned
to maximise unhindered wet floor area.
Sensors to activate water pump.
For lowest possible noise levels.
ESL Wet Floor Formers can safely take a
loading of up to 30 Stone (190 kg), cater-
ing for the weight of both a wheelchair
user and a carer.
The ESL Former provides a swift and cost
effective method of creating a wet floor area
that can be covered with non-slip flooring
for step-free, level access showering.
The range of preformed bases ensures that
the correct falls are created - a huge 18 mm
gradient to the drain – coupled with a
waste position designed to create a truly
unhindered showering area.
Design features
Huge 18 mm preformed gradient to the
drain for swift water dispersal.
Stylish stainless steel drain cover provides
a quality finish.
40 mm flat edge surround ensures a good
water seal for the doors.
Can be used with the extensive range of
ESL door options.
Formers are available for both gravity and
pumped waste installations.
Noise reduction on pumped waste
The unique design of the gully has the
effect of reducing noise from the pump for
a quieter, less intrusive solution.
Automatic pump activation
In addition to the unique gully, our form-
ers are equipped with ESL Pressalit Care’s
tried and tested automatic pump activation
system.
In conjunction with the Whale Gulper pump
this system has been designed to ensure
that the pump operation can be matched
to the requirements of the installation to
ensure the lowest possible noise levels are
achieved.
No flow switch is needed for the pump.
Guarantee 15 Years
ESL Pressalit Care guarantees to remedy
material and manufacturing defects for a
period of 15 years from the invoicing date.
(Excludes pump).