MGC-25/50/100 MGC+50/100 - Polycom

More documents

Recommendations

Info

<strong>MGC</strong> Release Notes - Version 7.5 Disconnecting from the Falcon Diagnostic Tool 80 Disconnecting from the Falcon diagnostic tool resets the MCU and puts it back into Normal mode. If the MCU is not connecting properly in the <strong>MGC</strong> Manager Application, this option is a good way to restore the connection. This is also the recommended way to close the Falcon tool. To disconnect from the Falcon diagnostic tool: 1. Right-click the MCU icon and then select Disconnect. Alternatively, on the MCU menu, click Disconnect. A pop-up window appears prompting you to confirm the selection. 2. Click OK. The MCU disconnects from the Falcon diagnostic tool and is reset. At the end of the reset, the MCU status is restored to Normal mode.
Appendix - Adding an MCU to the Network To add an MCU to the MCU Network: 1. Right-click the MCU Network icon, and then click Add MCU. 2. Alternatively, on the MCU menu, click Add MCU. 3. The Add MCU dialog box opens. Appendix A - Falcon Diagnostic Tool 4. In the Name box, enter the name of the MCU. Specify a name that clearly identifies the MCU. 5. In the IP Address box, enter the IP Address of the MCU. The correct IP address should be obtained from your network administrator. 6. The correct Port Number appears in the dialog box. 7. Enter the user name of the MCU in the User Name field. 8. Enter the MCU password in the Password field. 9. Click the Add button. The Add MCU dialog box closes. A new icon with the specified MCU name appears in the Browser pane below the MCUs Network icon. 81
Page 1 and 2:
MGC-25/50/100 MGC+50/100 Release No
Page 3 and 4:
Table of Contents Version 7.5 - New
Page 5 and 6:
Version 7.5 - New Features List The
Page 7 and 8:
Table 1: New Features List (Continu
Page 9 and 10:
Version 7.5 Upgrade Package Content
Page 11 and 12:
# Board Type Prior to Installation
Page 13 and 14:
Table 1: Version 7.5 Interoperabili
Page 15 and 16:
Dongle Upgrade Dongle Information T
Page 17 and 18:
Software Upgrade Procedure MGC-25
Page 19 and 20:
6. Click Download. Save the new don
Page 21 and 22:
Software Upgrade Procedure Upgradin
Page 23 and 24:
Installing the MGC Manager Software
Page 25 and 26:
Detailed Description - Video Detail
Page 27 and 28:
Detailed Description - General Netw
Page 29 and 30:
Secure Socket Layer (SSL) Detailed
Page 31 and 32:
9. Paste the certificate’s text i
Page 33 and 34: Detailed Description - General —
Page 35 and 36: Ad Hoc Auto Cascade Detailed Descri
Page 37 and 38: Limitations Detailed Description -
Page 39 and 40: HTTP File Transfer Mode Detailed De
Page 41 and 42: Direct IP Dial-in Detailed Descript
Page 43 and 44: Detailed Description - General —
Page 45 and 46: Detailed Description - General MGC+
Page 47 and 48: Corrections, Pending Issues and Lim
Page 49 and 50: Table 4: Corrections between Versio
Page 51 and 52: Corrections between Versions V.7.0
Page 53 and 54: Version 7.5 Pending Issues Table 6:
Page 55 and 56: Table 6: Pending Issues (Continued)
Page 57 and 58: Table 6: Pending Issues (Continued)
Page 59 and 60: Table 7: System Limitations (Contin
Page 69 and 70: Appendix A - Falcon Diagnostic Tool
Page 71 and 72: Table 8: Diagnostic Tests Card Unit
Page 73 and 74: Table 8: Diagnostic Tests Card Unit
Page 77 and 78: Setting the Log Files Path Appendix
Page 79 and 80: Running Diagnostic Tests Appendix A
Page 83: Test Results Appendix A - Falcon Di
Page 87 and 88: Log File Report Examples Appendix A
show all

MGC-25/50/100 MGC+50/100 - Polycom

Create successful ePaper yourself

Delete template?

Save as template?