MGC-25/50/100 MGC+50/100 - Polycom
MGC-25/50/100 MGC+50/100 - Polycom
MGC-25/50/100 MGC+50/100 - Polycom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MGC</strong> Release Notes - Version 7.5<br />
Starting the Falcon Diagnostic Tool<br />
Falcon Main Window<br />
70<br />
The Falcon tool is part of the <strong>MGC</strong> Manager Options menu.<br />
To Start the Diagnostics Tool:<br />
1. Terminate all On Going Conferences and cancel any soon to open Reservations on the<br />
MCUs to be tested.<br />
2. In the Options menu, select Diagnostics tool.<br />
The Falcon diagnostics tool opens.<br />
The Falcon diagnostics tool displays all the MCUs currently defined in the <strong>MGC</strong><br />
Manager, see “Falcon Main Window” on page 1-70. You can define other MCUs so<br />
they can be displayed in the <strong>MGC</strong> Manager and in the Falcon tool.<br />
The MCU network is displayed in a Browser pane on the left side of the Falcon<br />
window.<br />
Main menu<br />
Browser pane<br />
Tests available<br />
for the selected<br />
element<br />
Displays the Test<br />
Results.<br />
Test columns<br />
change if test is<br />
run on an MCU<br />
unit or on a card.<br />
Detailed<br />
explanation of<br />
selected test<br />
results<br />
Test Modes available for running tests IP Test window. It is<br />
enabled when running<br />
the LAN test on an IP+<br />
or IPN card.
Change language