MGC-25/50/100 MGC+50/100 - Polycom

MGC Release Notes - Version 7.5
58
Table 7: System Limitations (Continued)
No. Category Description ID#
42. General MCU software installation must be
performed from a mapped location
(X:\....) and not from a network location
using Windows “My Network Places”.
43. General When a defined dial-in participant is
moved to the Operator conference with
“Attend with details”, and is
disconnected, the Attended Participant
window cannot be closed and the
participant disappears from the
conference (as an undefined
participant).
44. General Long backup time (more than 15
minutes) for reservations (in XPEK
only).
45. General When the participant name has been
changed and you add a new
participant using the first participant’s
former name a message “STATUS
PARTY NAME EXISTS” appears.
46. General When definiting Network Services, the
Apply button is disabled.
47. General When an Entry Queue accessed
Meeting Room is active you cannot
change the password.
48. General When you open the LAN.cfg with
Notepad application, the file’s content
is listed in a single string. Editing the
file may result in an MCMS crash.
49. H.264 In the H.264 Quad View mode
endpoints do not connect in H.264.
50. H.264 IP Participants are connected as
Secondary when moved from a CP/
H.264 conference to a CP COP/H.264
conference, running at a different line
rate.
51. H.323 In H.323 Fixed Ports mode - although
only two ports are allocated to audio
and two ports to video, defining a
range of two consecutive ports for
each will result in an error message
indicating ports overlap.
52. Interop After moving a participant with a
Tandberg endpoint to a conference
without H.263 annexes the endpoint
remains secondary.
14227
14813
and
14838
—
19350
21103 Use the OK button.
21308
— Open the LAN.cfg
file with WordPad
and only change
the MCU’s IP
address.
21371
17198
— Define the range
leaving a 2-port
gap.
17624
Workaround/
Remarks