MGC-25/50/100 MGC+50/100 - Polycom

MGC Release Notes - Version 7.5
52
Table 6: Pending Issues (Continued)
#. Category Description ID# Remarks
35. NTP When the MCU connects to the NTP
server for a time calibration, connection
problems occur and 15 hour time
deviations result on the MCU.
36. On-line Help On-line help is not updated in version
7.0.X.
37. PSOS When sending files to the MCU, the
MCU displays a “Bad Connection”
status indication. When the download is
completed the status indication reverts
to “Normal”.
38. PSOS The Backup and Restore processes
take more than 20 minutes to complete.
39. PVX During MCU dialout, the PVX endpoint
connects as “Secondary” when the dial
out call is set to H.263 and the endpoint
VGA Encoding is enabled.
40. SIP An IP Video Switching conference set
to 256Kb with many SIP participants
may crash the IP+ card.
41. SIP After a SIP connection failure, deleting
SIP participants from the conference
fails.
42. SIP When changing the Refresh SIP
registration in the IP Service to 10
seconds, the LCS proxy rejects the
MGC and registration fails.
43. SIP LCS proxy does not work with
Automatic SIP-Factory settings.
44. SSL The MCU occasionally disconnects
from MGC manager when using a
secured port (port 443 - SSL).
45. SNMP SNMP MIB2 sections: interfaces, at, ip,
icmp, tcp, udp, egp transmission are
not supported in XPEK.
46. T1-CAS T1-CAS is not supported on the
MGC-25.
47. T-120 During the creation of a T-120
conference an error may occur.
48. Video+ When changing the video protocol of a
conference from H.264 to H.263 long
delays in the video occur.
20619
15670
17914
18869
21115
19547
20788
21191 Set the Refresh
SIP Registration
to more than 10
seconds.
21319 In the LCS proxy,
define
static-route rules
using IP board
(format:
*@IPAddress)
20880 Reconnect to the
MCU.
17175
15663
19501
19315