MGC-25/50/100 MGC+50/100 - Polycom

MGC Release Notes - Version 7.5
50
Table 6: Pending Issues (Continued)
#. Category Description ID# Remarks
13. FECC FECC does not work between an IP
endpoint and an MPI (DTE) endpoint.
14. FTP FTP service on XPEK may stop
working, which affects system
functions, such as prevent the Logger
Diagnostic Files from opening, causing
the MGC Manager application to close.
15. Gatekeeper
CON
Gatekeeper CON (Conference On
Demand) does not work with the
MGC-25. With the MGC-50/MGC-100/
MGC+ it works with asserts.
16. Gateway When connecting conferences using
the Gateway when you move a
participant to and from a conference, no
video is seen.
17. Gateway When calling from H323 endpoint to an
EQ placed on MGC V6 (used as an
MCU) through MGC V7 (used as GW
H323->H320), the call will fail.
18. General When moving a participant from one
conference to another, the “First to join”
IVR message is heard twice.
19. General The 'Auto_Redial' parameters in
'confer.cfg' file are not updated.
20. General Creating a conference with parameters
"enable invite" and "encryption", the
invitees are rejected.
21. General SilenceIT algorithm does not
automatically mute participants placing
their line on hold, hence background
music is played to the conference.
22. H.264 In Video Switching conference set to
H.264 and a line rate of 384Kbps, Sony
endpoints connect as secondary.
23. H.323 Connecting a service to a card during
card download card results in card
failure.
20401
20433 In the IP
Terminal, enter
restore_ftp. If
the system
displays an
indication that
the ftp cannot be
restored, reset
the MCU. If MCU
reset is not
applicable, call
support.
20477
19469
20232
19515
20897 Require MCU
restart in order
for changes to
take effect.
21097
21960
21207
20747 Connect the
service after
software
download is
completed.