MGC-25/50/100 MGC+50/100 - Polycom

MGC Release Notes - Version 7.5
48
Table 5: Corrections between Versions V.7.0 and V.7.0.1
#. Category Description ID# Remarks
13. H.323 An exception may occur when
connecting more than 96 H.323
participants in a blast dial-out
conference.
14. Lecture Mode -
CP conference
15. Lecture Mode -
CP conference
Incorrect speaker is displayed when the
first participant that connects to the CP
conference set to Lecture Mode,
running on the Standard Video card, is
muted and the second participant is
unmuted. The first participant remains
the speaker although second
participant should have been selected
as the speaker.
No video when connecting a single
participant to a CP conference set to
Lecture Mode, running on the Standard
Video card, and the selected layout is
other than full screen.
16. MGC Manager When creating a new Network Service,
after adding 10 different Spans, the
17. MGC Manager In the MGC Manager monitoring pane
refresh problems may cause wrong
endpoint status.
18. MGC Manager No 'Faulty connection' indication in the
MGC Manager application.
19. Video A blue screen is displayed for 1-1.5
seconds when the speaker changes in
a conference with more than 10
participants in Classic or Quad Views
CP conference running on the Video+
card.
20. Video Conferences with 4CIF or higher Video
Formats may encountered brief video
interruptions.
21. Video VSX endpoint connect as Secondary
(audio only) when connecting via ISDN
to a VSW conference set to Auto mode,
as the endpoint uses encryption for the
connection.
22. Video
Switching
In a conference set to 256Kb line rate,
connecting and disconnecting ISDN
endpoints cause the MUX+ card to
crash.
23. XGA In a IP conference with the Video
Format set to XGA, errors could occur
when sending content.
24. XPEK In certain instances the MCU does not
accept valid IP addresses
19887
17571
17571
19939
19860
20194
16032
19462
18991 This is an
endpoint issue
and not the
MCU’s.
19680
19632
19346