MGC-25/50/100 MGC+50/100 - Polycom

Table 4: Corrections between Versions V.7.0.1 and V.7.0.2
13. Falcon The Falcon application crashes after
downloading diagnostic traces on the
MGC-25.
Corrections, Pending Issues and Limitations
#. Category Description ID# Remarks
14. Falcon No Falcon diagnostics available on
Video+ cards.
15. General When the MCU is extremely loaded,
conferences may terminate before
their scheduled time (XPEK operating
system only)
16. General PictureTel Legacy endpoint cannot
connect to On Going conferences.
In the system.cfg, General section a
new flag:
TRADITIONAL_END_POINTS_MODE
=NO has been added (default). Set this
flag to YES, when using older
PictureTel endpoints.
17. General In the Participants Queue the operator
cannot attend the next participant. The
message "No Party in Participants
Queue" appears.
18. General Version default password and
connectivity issues when upgrading:
V.5 to V.6 & V.5 to V.7.
19. General When an operator joins the
conference, the conference
terminates.
20. H.239 In an IP conference Sony endpoints do
not open the Content channel.
21. H.239 After sending content in ISDN, the
H.239 channel does not open.
22. H.239 Slave conferences cannot receive
content from the Master conference on
the MGC-25.
23. IP Alias names for IP participants
increased to 100 characters.
24. IVR When connecting a defined dial-out
participant to a Meet Me Per
conference with IVR that all its options
are enabled, and the participant is first
to connect, the participant hears the
voice message (you are the first
participant to connect), but does not
hear the music that should follow the
message.
20469
—
19118
19945 Set the
system.cfg flag
to YES.
20141
20283
20511
19673
20565
20649
20481
16625
45