MGC-25/50/100 MGC+50/100 - Polycom

Corrections, Pending Issues and Limitations
Corrections between Versions V.7.0.2 and V.7.5
Table 3: Corrections between Versions V.7.0.2 and V.7.5
Corrections, Pending Issues and Limitations
#. Category Description ID# Remarks
1. Audio+ In an Encrypted VS conference with 96
Dial-out and 96 Dial-in participants, the
Audio+ cards crashed.
2. Cascade Video Switching, H.261 Fixed, 384Kbps
and H239/P+C defined conferences
may suffer from bad video quality.
3. CP In a CP conference with a PSTN
participant, the speaker indication
disappears.
4. General When the MGC Manager uses port 80
to connect to the MGC unit, the MGC
Manager may disconnect from the
MGC unit (Bad connection status).
5. H.239 When sending Content from two
endpoints at the same time (within the
same second), one endpoint will not be
able to send Content again.
6. H.239 Connecting 12 H.239 participants to an
MG323 board causes the card to crash.
7. Meeting Rooms When a conference is defined as a
Meeting Room, it takes over two
minutes to receive any indication from
MGC Manager.
8. MGC Manager Endpoints appear as “faulty connected”
during the first seconds of connection.
9. Microsoft During an On Going conference
participants from a previous conference
are listed.
10. MPI When upgrading the MCU software
from version 6.xx to version 7.0.X, on
an MCU with two MPI cards, an
exception may occur.
20460
20975
20375
20317
20452
20458
21248
20382
21472
19600
43