MGC-25/50/100 MGC+50/100 - Polycom

More documents

Recommendations

Info

MGC Release Notes - Version 7.5 42 When joining a Meeting Room, the system displays a video slide indicating the operations that can be performed from the participant’s endpoint and the DTMF code that must be used to activate each operation. Figure 3: Meeting Room Video Slide
Corrections, Pending Issues and Limitations Corrections between Versions V.7.0.2 and V.7.5 Table 3: Corrections between Versions V.7.0.2 and V.7.5 Corrections, Pending Issues and Limitations #. Category Description ID# Remarks 1. Audio+ In an Encrypted VS conference with 96 Dial-out and 96 Dial-in participants, the Audio+ cards crashed. 2. Cascade Video Switching, H.261 Fixed, 384Kbps and H239/P+C defined conferences may suffer from bad video quality. 3. CP In a CP conference with a PSTN participant, the speaker indication disappears. 4. General When the MGC Manager uses port 80 to connect to the MGC unit, the MGC Manager may disconnect from the MGC unit (Bad connection status). 5. H.239 When sending Content from two endpoints at the same time (within the same second), one endpoint will not be able to send Content again. 6. H.239 Connecting 12 H.239 participants to an MG323 board causes the card to crash. 7. Meeting Rooms When a conference is defined as a Meeting Room, it takes over two minutes to receive any indication from MGC Manager. 8. MGC Manager Endpoints appear as “faulty connected” during the first seconds of connection. 9. Microsoft During an On Going conference participants from a previous conference are listed. 10. MPI When upgrading the MCU software from version 6.xx to version 7.0.X, on an MCU with two MPI cards, an exception may occur. 20460 20975 20375 20317 20452 20458 21248 20382 21472 19600 43
Page 1 and 2: MGC-25/50/100 MGC+50/100 Release No
Page 3 and 4: Table of Contents Version 7.5 - New
Page 5 and 6: Version 7.5 - New Features List The
Page 7 and 8: Table 1: New Features List (Continu
Page 9 and 10: Version 7.5 Upgrade Package Content
Page 11 and 12: # Board Type Prior to Installation
Page 13 and 14: Table 1: Version 7.5 Interoperabili
Page 15 and 16: Dongle Upgrade Dongle Information T
Page 17 and 18: Software Upgrade Procedure MGC-25
Page 19 and 20: 6. Click Download. Save the new don
Page 21 and 22: Software Upgrade Procedure Upgradin
Page 23 and 24: Installing the MGC Manager Software
Page 25 and 26: Detailed Description - Video Detail
Page 27 and 28: Detailed Description - General Netw
Page 29 and 30: Secure Socket Layer (SSL) Detailed
Page 31 and 32: 9. Paste the certificate’s text i
Page 33 and 34: Detailed Description - General —
Page 35 and 36: Ad Hoc Auto Cascade Detailed Descri
Page 37 and 38: Limitations Detailed Description -
Page 39 and 40: HTTP File Transfer Mode Detailed De
Page 41 and 42: Direct IP Dial-in Detailed Descript
Page 43 and 44: Detailed Description - General —
Page 45: Detailed Description - General MGC+
Page 49 and 50: Table 4: Corrections between Versio
Page 51 and 52: Corrections between Versions V.7.0
Page 53 and 54: Version 7.5 Pending Issues Table 6:
Page 55 and 56: Table 6: Pending Issues (Continued)
Page 57 and 58: Table 6: Pending Issues (Continued)
Page 59 and 60: Table 7: System Limitations (Contin
Page 69 and 70: Appendix A - Falcon Diagnostic Tool
Page 71 and 72: Table 8: Diagnostic Tests Card Unit
Page 73 and 74: Table 8: Diagnostic Tests Card Unit
Page 77 and 78: Setting the Log Files Path Appendix
Page 79 and 80: Running Diagnostic Tests Appendix A
Page 83 and 84: Test Results Appendix A - Falcon Di
Page 85 and 86: Appendix - Adding an MCU to the Net
Page 87 and 88: Log File Report Examples Appendix A

MGC-25/50/100 MGC+50/100 - Polycom

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?