MGC-25/50/100 MGC+50/100 - Polycom

More documents

Recommendations

Info

MGC Release Notes - Version 7.5 H.239/People+Content Star Cascading Detailed Description 30 H.239/People+Content Star Cascading is available with mixed H.320 and H.323 Video Switching conferences. In MGC version 7.0, H.239/People+Content Star Cascading was only available in an IP Video Switching environment. All the conferences in the Star Cascading topology must have the same settings for the conference: line rate, audio algorithm, Video Parameters (Video Protocol, Video Format, Video Frame Rate, Annexes, and ProMotion) and other conferencing features such as Encryption. Highlights: • One central MCU is required in a conference. A slave MCU can only be cascaded to the main MCU. A Slave MCU cannot be cascaded with other slave MCUs. • Only two cascade options - "Master" and "Slave" - is available in H.320 H.239/ P+C cascade. There will be no "Auto" cascade mode like in regular H.320 cascade. • IVR is supported. However, if Node Type in the Participant Properties - Advanced is set to MCU, no IVR service is available. • Encryption is supported. • H.243 site names for H.320 are supported H.320 cascade links use the H.239 protocol and not Polycom P+C protocol, as in IP cascaded conferences. H.239 can only be implemented when in the system.cfg: H.239=YES.
Ad Hoc Auto Cascade Detailed Description Detailed Description - General The Auto Cascade feature enables automatic cascading of conferences. Both audio only and video conferences can be cascaded. The automatic cascading of conferences is beneficial in distributed MCU environment, when MCUs are installed in different locations. A maximum of six conferences can be Auto Cascaded into one conference. The MCU network can support multiple Auto Cascaded conferences simultaneously. The cascading is performed by an Ad Hoc Cascade component in the WebCommander Professional which monitors the MCUs. When the Ad Hoc Cascade component finds that two or more MCUs are running a conference with the same Conference Numeric ID, it checks if the conferences are already cascaded by looking for a cascading link between the conferences. If there are no cascading links, conferences are automatically connected using pre-defined cascading links. If at a later stage the Ad Hoc Cascade component finds an additional MCU running a conference with the same Numeric ID, it adds the conference to the cascaded conferences. Set up identical Ad Hoc Entry Queues and Profiles on each MCU, so that the cascaded conferences will have the same properties. To use the Auto Cascade feature, the system.cfg flag QUICK_LOGIN_VIA_ENTRY_QUEUE must be set to NO on all MCUs, that is, the Conference Numeric ID routing mode must be used. This flag is located in the GREET AND GUIDE/IVR section of the system.cfg file. 31
Page 1 and 2: MGC-25/50/100 MGC+50/100 Release No
Page 3 and 4: Table of Contents Version 7.5 - New
Page 5 and 6: Version 7.5 - New Features List The
Page 7 and 8: Table 1: New Features List (Continu
Page 9 and 10: Version 7.5 Upgrade Package Content
Page 11 and 12: # Board Type Prior to Installation
Page 13 and 14: Table 1: Version 7.5 Interoperabili
Page 15 and 16: Dongle Upgrade Dongle Information T
Page 17 and 18: Software Upgrade Procedure MGC-25
Page 19 and 20: 6. Click Download. Save the new don
Page 21 and 22: Software Upgrade Procedure Upgradin
Page 23 and 24: Installing the MGC Manager Software
Page 25 and 26: Detailed Description - Video Detail
Page 27 and 28: Detailed Description - General Netw
Page 29 and 30: Secure Socket Layer (SSL) Detailed
Page 31 and 32: 9. Paste the certificate’s text i
Page 33: Detailed Description - General —
Page 37 and 38: Limitations Detailed Description -
Page 39 and 40: HTTP File Transfer Mode Detailed De
Page 41 and 42: Direct IP Dial-in Detailed Descript
Page 43 and 44: Detailed Description - General —
Page 45 and 46: Detailed Description - General MGC+
Page 47 and 48: Corrections, Pending Issues and Lim
Page 49 and 50: Table 4: Corrections between Versio
Page 51 and 52: Corrections between Versions V.7.0
Page 53 and 54: Version 7.5 Pending Issues Table 6:
Page 55 and 56: Table 6: Pending Issues (Continued)
Page 57 and 58: Table 6: Pending Issues (Continued)
Page 59 and 60: Table 7: System Limitations (Contin
Page 69 and 70: Appendix A - Falcon Diagnostic Tool
Page 71 and 72: Table 8: Diagnostic Tests Card Unit
Page 73 and 74: Table 8: Diagnostic Tests Card Unit
Page 77 and 78: Setting the Log Files Path Appendix
Page 79 and 80: Running Diagnostic Tests Appendix A
Page 83 and 84: Test Results Appendix A - Falcon Di
Page 85 and 86:
Appendix - Adding an MCU to the Net
Page 87 and 88:
Log File Report Examples Appendix A
Page 89 and 90:
Appendix A - Falcon Diagnostic Tool
Page 91 and 92:
Page 93 and 94:
show all

MGC-25/50/100 MGC+50/100 - Polycom

Create successful ePaper yourself

Delete template?

Save as template?