Sniffer® Portable Professional User's Guide - NetScout

Chapter 4
50 Sniffer Portable Professional
Table 4-1. Setting Tools > General Tab Options
Entry Description
Show Use these options to:
• Specify which toolbars appear in the
Sniffer window by default. You can
enable and disable the Main toolbar
and Capture toolbar separately.
• Specify whether the Status bar
appears at the bottom of the Sniffer
window.
• Specify whether monitor applications
should show Formatted data or not. If
this option is enabled, the byte values in
the Host and Matrix tables will change
between using K and M indicators
(Formatted) or fully numeric counts.
For example, 47K would be a
Formatted data representation of a
byte count that would otherwise be
shown as 47,138.
• Specify whether the Sniffer window
should add an Extra Filter Window
when a Display filter is applied to a
capture buffer or trace file. If this option
is not enabled, a set of filtered frames
resulting from a Display filter will
appear in an additional tab on the
existing decode window rather than in
an entirely new window.
• Specify whether Sniffer Portable
Professional should always start in log
off mode. In log off mode, Sniffer
Portable Professional will not actively
monitor the selected adapter at startup.