Sniffer® Portable Professional User's Guide - NetScout

Display Setup > Packet Selection Options
Displaying Captured Data
Use the options in the Display Setup > Packet Selection tab (Figure
8-10) to specify how Quick Filters are applied and how new tabs of
filtered frames are named (the Filtered Tab Name option).
Set the following options:
Table 8-7. Packet Selection Tab Options
Option Description
Select Packets When this option is enabled, quick filters either
select or clear matching packets in the active
Decode tab, depending on whether Select
Matching or Clear Selected is set.
When this option is not enabled, quick filters return
matching packets in a new tab of filtered packets.
Select Matching When this option is enabled, quick filters select
matching packets in the active Decode tab (check
the boxes in the leftmost column of the Summary
pane).
Clear Selected When this option is enabled, quick filters clear the
selection of matching packets in the active Decode
tab.
Apply on Selected
Set
When this option is enabled, quick filters are
applied only to the currently selected packets in
the active Decode tab.
Filtered Tab Name Use this option to specify how new tabs of filtered
frames are named. New tabs will be added using
the name you specify here along with a sequence
number.
User’s Guide 183