Sniffer® Portable Professional User's Guide - NetScout

Figure 8-4. Selecting the Automatic Filter Type
You can select from the following options:
Table 8-4. Automatic Filter Type Selection Options
Connection
IP Source Address
IP Destination
Address
IP Addresses
Source Port
Destination Port
Ports
Source Application
Destination
Application
MAC Addresses
3 Click the Define Display Filter button .
Displaying Captured Data
Use both the source/destination IP
addresses and source/destination ports as a
filter.
Use only the source IP address as a filter.
Use only the destination IP address as a
filter.
Use both the source and destination IP
addresses as a filter (traffic flowing between
these two addresses only).
Use only the source port as a filter.
Use only the destination port as a filter.
Use both the source and destination port as
a filter.
Use both the source IP address and port as
a filter.
Use both the destination IP address and port
as a filter.
Use the source and destination MAC
addresses as a filter.
User’s Guide 169