Sniffer® Portable Professional User's Guide - NetScout

Chapter 7
Discovered access points
are listed in the upper list;
discovered mobile units
are listed in the lower list.
IP Address fields are
editable — you can enter
a custom IP address.
Selected access points
and mobile units will be
added to the list of known
addresses by clicking this
button.
By default, all discovered addresses are selected for addition to the Known list (the box
at the right of each entry in the list is checked). You can select and deselect individual
entries for addition or click Select All and Deselect All for faster selection.
144 Sniffer Portable Professional
Figure 7-3. Adding Discovered Addresses Postcapture
4 Select the access points and mobile units you would like to add to
the list of known addresses by checking the checkbox at the right
of each desired entry. By default, all discovered addresses are
selected for addition. You can change selections in the following
ways:
By clicking Select All and Unselect All.
By clicking in the checkbox for individual entries to toggle
them between selected and unselected.
5 When you have finished selecting the addresses for addition, click
Update Known Wireless Units List at the bottom of the dialog
box.
Those selected addresses not already in the Expert’s list are added.
You can verify that they have been added by displaying the Tools
> Expert Options > 802.11 Options tab or the Tools >
Wireless > Rogue dialog box. The Known Access Points in the
Network and Known Mobile Units in the Network lists will
include the newly added addresses.