Sniffer® Portable Professional User's Guide - NetScout

Real-Time Expert Display
Adding Known Addresses from the Postcapture Display
Use the following procedure to add the MAC addresses of known wireless
units (either access points or mobile units) automatically from the
Expert tab of the postcapture display.
To add known addresses automatically from the postcapture
display:
1 Display either a capture buffer or a saved trace file.
2 Click the Expert tab of the postcapture display.
NOTE: If the Expert tab is not available, make sure the
Expert tab option is enabled in the Display > Display Setup
> General tab.
3 Click Wireless Units List at the top of the Expert pane.
The Wireless Units Discovered in this trace dialog box appears
(Figure 7-3). This dialog box has two separate lists of wireless units
discovered in the capture buffer or trace file — one for access
points and one for mobile units.
NOTE: You can edit the IP Address field in either list. In
some cases, the Expert may be unable to determine a station’s
IP address. In these cases, you can manually enter an IP
address using this feature.
User’s Guide 143