Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Network Tab
Using the Statistics Panel
The Network tab (a) provides statistics for individual subnets.
Packets, Bytes, Packets/sec, and Bytes/sec are displayed by
default for each entry in the tab. Use the Statistics panel controls to
filter, sort, select, collapse, and expand the statistical data. See Using
the Statistics Panel Tools on page 99.
a
Figure 4-6. Network Tab
IMPORTANT: By default, the IP Address column is collapsed – it
simply indicates the number of unique nodes seen in the subnet. This
helps make the Network tab a concise list of the individual subnets
seen. You can expand this data using the right-mouse menu to see each
of the IP addresses seen on the subnet. See Collapsing and Expanding
Column Data on page 100.
IMPORTANT: If you collapse the Network column, the resulting
Packets and Bytes counters are the sum of the Packets and Bytes values
for all networks. Packets sent to a foreign network are only counted
User’s Guide 79