Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

Using the Graph Panel Controls
Table 3-1. Graph Panel Controls
Butto
n
EARLY FIELD TRIAL Chapter 3
54 Sniffer Adaptive Application Analyzer
The Graph panel controls let you change the size of the data window,
move up and down the x and y axis, travel through time on the data
stream, and actively monitor incoming stream data. Use the following
buttons to perform functions described in this table.
Name Description
Up Press this button to climb the y axis, increasing the y-axis interval for the
selected Data Type (Packets, Bytes, Bits, or Utilization).
Down Press this button to step down the y axis, decreasing the y-axis interval for
the selected Data Type (Packets, Bytes, Bits, or Utilization).
Oldest
Packet
Previous
Time
Selection
Next
Time
Selection
Current
Time
Active
Monitor
Press this button to rewind to the beginning of the stream.
Press this button to rewind one interval. An interval is determined by the
amount of time you have configured in the time selector.
Press this button to fast forward one interval. An interval is determined by
the amount of time you have configured in the time selector.
Press this button to fast forward to the end of the stream or the last
captured packets in a trace file.
Press this button to start real-time monitoring. See Monitoring for Updates –
Active Monitor Mode.
Pause Press this button to pause real-time monitoring. See Monitoring for Updates
– Active Monitor Mode.
Monitoring for Updates – Active Monitor Mode
Press the Active Monitor button to start real-time monitoring. Active
Monitor mode displays new data on the Graph panel as it arrives from
the stream. Configure the default monitor update time interval from the
Quick Select > Options > Graph tab. See Setting Graph Tab Options
on page 247 for details.