Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Step 4 – Capturing Data
Quick Start – Five Steps
RMON statistics are valuable for understanding the network entities and
traffic volumes on your network. Network troubleshooting, however,
usually requires packet analysis. Use the following procedure to set the
capture mode and start capture.
1 Click the Configure Capture button and select the capture mode
(Figure 2-5) – either Adaptive Capture or Raw Capture.
Figure 2-5. Configuring the Capture Mode
The table below summarizes the differences between the two
modes as well as the postcapture analysis views available for each:
User’s Guide 33