Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL Chapter 9
Figure 9-7. Subnet Masks Tab
234 Sniffer Adaptive Application Analyzer
To add an IP Network Address and Subnet Mask:
1 Click the Add button to create a new entry.
2 Enter the IP address in the IP Net Address column using the x.x.x.x
format, where each x is an integer from 0 - 255.
3 Enter the subnet mask associated with the IP address in the Subnet
Mask column.
4 Click Apply.
5 Click OK.
RIP Options Settings
The Expert performs RIP (Routing Information Protocol) analysis and
builds a routing table by parsing RIP and other routing protocols in
captured frames. RIP analysis is shown in the Route layer in the Expert
tab and lets you detect common routing problems.You can disable RIP
analysis, or specify the level of analysis you want to perform (traffic
counts and misdirected frames, or traffic counts only).