Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Raw Capture Mode Postcapture Analysis
8 Click OK to start the search. If a pattern match is found, the packet
containing the pattern will be displayed in the Decode Display.
Press F3 to search for the next packet.
Searching for Frames Matching Packet Status Flags
To search for packets with a a particular Status flag:
1 Display the Find Frame dialog box using any of the following
commands:
Select Find Frame from the Display menu.
Select Find Frame from the Decode tab’s context menu
(activated by right-clicking anywhere on the Decode tab).
Use the Alt-F3 keyboard shortcut.
2 Click the Status tab.
3 Select the status flag(s) to search for.
4 Click Up or Down to specify the search direction.
5 Click OK. If a frame with one of the specified flags is found, the
frame containing the will be displayed in the Decode Display. Press
F3 to search for the next packet matching the same criteria.
For descriptions of the various possible packet status flags, see Packet
Status Flags in the Summary Pane on page 169.
Figure 8-20. Status Tab of the Find Frame Dialog Box
User’s Guide 205