Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Table 8-9. Summary Display Options
Display Setup > Packet Selection Options
Raw Capture Mode Postcapture Analysis
Optional Fields • Status. Flags associated with a
frame. See Packet Status Flags in the
Summary Pane on page 169 for a
description of the flags that can
appear in the Status column.
• Absolute time. When the frame was
received.
• Delta time. The interval between the
current frame and the previous frame.
• Relative time. The interval between
the current frame and the marked
frame.
• (Len) Bytes. The frame’s length.
• Cumulative bytes. The length of all
frames, starting with the marked
frame and including the current
frame.
Exclude protocols Checked protocols are excluded from the
Decode tab. Click All to exclude all
protocols or click None to include all
protocols.
Use the options in the Display Setup > Packet Selection tab to
specify how Quick Filters are applied and how new tabs of filtered
frames are named (the Filtered Tab Name option).
Set the following options:
Table 8-10. Packet Selection Tab Options
Option Description
Select Packets When this option is enabled, quick filters either
select or clear matching packets in the active
Decode tab, depending on whether Select
Matching or Clear Selected is set.
When this option is not enabled, quick filters return
matching packets in a new tab of filtered packets.
Select Matching When this option is enabled, quick filters select
matching packets in the active Decode tab (check
the boxes in the leftmost column of the Summary
pane).
User’s Guide 195