Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Raw Capture Mode Postcapture Analysis
NOTE: When Frame Slicing is enabled on the Capture > Define
Filter > Buffer tab, windowed reassembly is not supported.
Enabling windowed reassembly and frame slicing can result in some
minor display problems.
Display Setup > Summary Display Options
The following table summarizes the options you can set in the Display
Setup > Summary Display tab.
Table 8-9. Summary Display Options
Show Expert symptoms If enabled, the Summary display shows
the last symptom found (if any) for each
frame.
Show all layers If enabled, the Summary pane shows one
line for each protocol level contained in a
frame. If disabled, only one line (for the
highest enabled protocol level) is shown.
Show network address If enabled, the Summary pane shows
addresses as network addresses. If
disabled, the Summary pane shows
addresses as hardware (DLC) addresses.
Display vendor ID on MAC
Address
Resolve name on Network
address
Use Address Book to resolve
name
If enabled, the Summary pane shows
vendor names for the first portion
(manufacturer’s ID) of MAC addresses
instead of numerical addresses.
If enabled, the Summary pane shows
names for network addresses instead of
numerical addresses.
If enabled, the Summary pane will
substitute names for addresses for any
stations that are named in the Address
Book.
User’s Guide 193