Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Setting Display Setup Options
Raw Capture Mode Postcapture Analysis
You can customize the way data is displayed in the decode display. You
can:
Exclude certain subprotocols from the summary pane (this is a
more detailed control than a display filter).
Set the summary address field format (network or hardware).
Specify whether the two-station display format should be used.
Select optional fields to be shown in the summary display.
Color-code packets displayed in the summary pane based on their
protocol.
Select the font for the detail display.
To set the display options:
1 Select Display Setup from the Display menu. The Display Setup
dialog tabs are summarized in the following table.
Table 8-8. Display Setup Options
Display Setup Tab Settings for...
General Select which tabs show on the Display. You
can show/hide the Expert tab and the post
analysis tabs (Host Table, Matrix, Protocol
Distribution, and Statistics). The Decode
tab is always displayed. You can also set
options that affect how fast data is
decoded. See Display Setup > General
Options on page 192.
Summary Display Specify the symptoms and protocol detail
in the Decode Summary pane. See Display
Setup > Summary Display Options on
page 193.
Protocol Color Click here to change the colors used for
protocols in the summary pane.
Protocol Expand Click here to set each protocol’s display
mode in the Detail pane to fully expanded
or one-line summary.
User’s Guide 191