Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL Chapter 8
180 Sniffer Adaptive Application Analyzer
The Console displays the Define Filter dialog box with the specified
component of the selected frame added to the last used filter
definition. You can edit the settings in this dialog box, if necessary.
When you are satisfied with the filter definition, click Apply to filter
the active tab.
Selecting Filters / Combining Multiple Filters
You use the Display > Select Filter command to display a dialog box
in which you can select display filters to apply. The dialog box lists all
display filters you have created.
You can either use a single listed filter or check the Multiple Filter Mode
option and check the boxes for multiple filters.
To select a display filter:
1 Use the Display > Select Filter command.
The Select Filter dialog box appears (Figure 8-10).
Figure 8-10. The Select Filter Dialog Box
2 Do you want to use a single filter or combine multiple filters from
the list?
Multiple Filter Mode. If you want to combine multiple filters
from the list, enable the Multiple Filter Mode option. Then,
check the boxes corresponding to the filters you want to use.