Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Raw Capture Mode Postcapture Analysis
Table 8-7. Automatic Filter Type Selection Options
b
Ports
Source Application
Destination
Application
MAC Addresses
3 Click the Define Display Filter button .
The Define Filter - Display dialog box appears populated based on
the specified portion of the selected frame (Figure 8-6). Notice that
the settings already populated in this dialog box correspond to
those shown in the selected packet in the Summary pane in Figure
8-5.
Figure 8-6. Define Filter - Display Dialog Box
Use both the source and destination port as
a filter.
Use both the source IP address and port as
a filter.
Use both the destination IP address and port
as a filter.
Use the source and destination MAC
addresses as a filter.
Note the following important points about the Define Filter - Display
dialog box:
You can change which parts of the selected frame are used for
an automatic filter by clicking the dropdown at the top of the
Define Filter dialog box (a in Figure 8-6) and selecting a
different option.
a
User’s Guide 175