Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Raw Capture Mode
Postcapture Analysis
Overview
8
This chapter describes postcapture analysis views for data captured in
Raw Capture mode. In Raw Capture mode, Sniffer Adaptive Application
Analyzer stores raw packets rather than condensed Adaptive Session
Packets. Sniffer Adaptive Application Analyzerautomatically displays the
postcapture analysis views corresponding to your capture mode –
Adaptive or Raw Capture.
IMPORTANT: Refer to Adaptive Session Analysis on page 141 for
information on the postcapture views available for data captured in
Adaptive mode. Also, see Postcapture Analysis by Capture Mode on page
141 for a discussion of the postcapture views available for different
capture modes.
When you mine data captured in raw Raw Capture mode, Sniffer
Adaptive Application Analyzer displays the selected packets in a variety
of formats, including the Expert tab, classic line-by-line decode tab, and
a variety of other formats. This section includes the following major
topics:
Introducing the Raw Mode Postcapture Window on page 162
Introducing the Packet Decode Tab on page 165
Navigating the Decode Tab on page 167
Working with Display Filters on page 172
Setting Display Setup Options on page 191
Searching for Frames in the Decode Display on page 197
Using the Matrix Tab on page 209
Using the Host Table Tab on page 212
Using the Protocol Distribution Tab on page 214
Using the Statistics Tab on page 216
User’s Guide 161