Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

EARLY FIELD TRIAL
Adaptive Decode View
a
b
Adaptive Session Analysis
The Adaptive Decode View (Figure 7-7) provides line-by-line protocol
decodes for data captured in Adaptive mode. You can display the
Adaptive Decode View in either of the following ways:
Drill down from the Adaptive Session view using the Adaptive
Packet Drill Down command (refer to Drilling Down to Adaptive
Session Packets on page 151 for details on how to do this).
Drilling down from the Session View opens just those ASPs
associated with flow selected in the Session view.
Open an Adaptive Session Packet (.asp) file directly using File >
Open. Depending on how the ASP file was saved, this could
produce just those ASPs retrieved during a drilldown, or, if you
open the full ASP file automatically saved during mining, all packet
data in the time selection, including raw packets. Refer to Opening
ASP Files on page 155 for more information on opening ASP files.
Adaptive Decode View Mechanics
The mechanics of the Adaptive Decode View will be familiar to anyone
accustomed to traditional Sniffer decodes – individual ASPs are listed
line-by-line in a Summary pane (a) at the top of the window. Selecting
an ASP in the Summary pane populates the lower Detail pane (b) with
the Adaptive decode for the selected packet. In contrast to the
traditional, tri-pane Sniffer decode window, the Hex pane is not present.
Figure 7-7. Adaptive Decode View
User’s Guide 153