Sniffer Adaptive Application Analyzer: Adaptive Mode ... - NetScout

Modifying Statistics Panel Columns and Tabs
EARLY FIELD TRIAL Chapter 4
104 Sniffer Adaptive Application Analyzer
In the Statistics panel, you can add new columns and tabs, modify the
tab order, and modify the column order:
Adding New Columns
Adding New Columns
Adding New Tabs on page 106
Reordering and Deleting Columns and Tabs on page 106
To add a new column, click the heading and a list of
categories appear. Categories vary according to the data type available
on each tab. A complete list of categories are listed in the following table.
Note, however, that the exact meanings of these statistics change
depending on the tab in which it is displayed.
NOTE: Statistics columns cannot be added until there is at least
one index column added on the Statistics panel tab. Note, however,
that adding an index column will clear all existing checkbox and
highlighted selections on the current Statistics panel tab.
Table 4-1. New Column Heading Options (1 of 3)
Column Category Description
MAC Address A The hardware address for a station sending packets on the
network.
MAC Address B The hardware address for a station receiving packets on the
network.
VLAN ID The ID for a VLAN on the network.
NOTE: This statistic is only available for VLAN stream types.
Layer 2 The layer two protocol for the selected statistic. For example,
IP_ARP, Spanning_Tree, and so on.
Network A subnet address on the network, including the mask. For
example, 192.168.1.0/24 indicates the 192.168.1 subnet with a
24-bit (Class C) subnet mask.
IP Address A The IP address for a station sending packets on the network.
IP Address B The IP address for a station receiving packets.