power meter for electrosurgical units - MTK Peter Kron GmbH
power meter for electrosurgical units - MTK Peter Kron GmbH
power meter for electrosurgical units - MTK Peter Kron GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
POWER METER FOR<br />
ELECTROSURGICAL UNITS<br />
PETER FEUCHT<br />
Successor of the proven EPM 2<br />
Enhanced with an abundance of new features<br />
mtk <strong>Peter</strong> <strong>Kron</strong> <strong>GmbH</strong><br />
Medical Test Equipment & Software<br />
Zossener Strasse 41, 10961 Berlin, Germany<br />
Tel.: +49 30 69 81 8840<br />
Fax: +49 30 69 81 88 49<br />
Email: info@mtk-biomed.de<br />
www.mtk-biomed.de<br />
EPM 3<br />
calibrated calibrated !
OUTPUT POWER AND<br />
CURRENT METER FOR<br />
ELECTROSURGICAL UNITS<br />
Bolometric RMS Converter<br />
(20mA...2200mA) with internal<br />
overload protection<br />
Rugged yellow plastic caselightweight<br />
and beautifull<br />
Automatic adjustment of the<br />
current converter every 30s<br />
Available with calibration certificate<br />
according to PTB standards and<br />
guidelines of TÜV product service,<br />
Munich<br />
Large range of load resistors:<br />
10, 25...3175 <br />
(128 values)<br />
Additional fixed 200 200 resistor <strong>for</strong><br />
tests according to EN 60601-2-2 Art. 19.101<br />
(5 k k and 10 10 k optional)<br />
Large LC Display with CFL backlight<br />
RS 232 232 Interface<br />
Software <strong>for</strong> Windows PCs with database<br />
capability to record data according to<br />
manufacturer's instructions<br />
Cable sets <strong>for</strong> diverse <strong>electrosurgical</strong> <strong>units</strong><br />
are available upon request<br />
Supply Voltage: 100...250 VAC, 45...60 Hz<br />
Fixed load 200 / 250W<br />
<strong>for</strong> leakage current<br />
measurements according<br />
to IEC 601-2-2<br />
Input connectors<br />
4mm safety sockets<br />
Current monitor<br />
1A ^<br />
s = 1Vs Relay contact to<br />
release the<br />
<strong>electrosurgical</strong> unit<br />
Connection Board<br />
Fixed<br />
Load<br />
200 <br />
W<br />
Power-<br />
Meter<br />
Variable<br />
Load<br />
10 ...<br />
3175 <br />
Current- Current-<br />
Monitor<br />
Foot-<br />
Switch<br />
Softkeys<br />
{<br />
The new EPM 3 is the ideal choice <strong>for</strong><br />
all measurement tasks in manufacturing<br />
and maintenance of <strong>electrosurgical</strong> <strong>units</strong>.<br />
EPM 3<br />
Calculated<br />
Power in Watts<br />
Measured<br />
HF Current in mA<br />
Control Panel<br />
ELECTROSURGICAL<br />
POWER METER<br />
Continuous Measurement<br />
Single Mode<br />
Power Distribution<br />
Graphics Mode<br />
mtk <strong>Peter</strong> <strong>Kron</strong> <strong>GmbH</strong><br />
Medical Test Equipment & Software<br />
Zossener Strasse 41, 10961 Berlin, Germany<br />
Tel.: +49 30 69 81 8840<br />
Fax: +49 30 69 81 88 49<br />
Email: info@mtk-biomed.de<br />
www.mtk-biomed.de<br />
START<br />
STOP<br />
7 8 9<br />
4 5 6<br />
1 2 3<br />
0 +/- , /<br />
{<br />
Selected load<br />
resistor in Ohms<br />
RS 232<br />
Numerical Input<br />
Continuously indicated<br />
results of current and<br />
<strong>power</strong> measurement<br />
<strong>for</strong> adjustment puposes.<br />
Single measurement<br />
with manual trigger.<br />
Automatic recording of<br />
the output <strong>power</strong> over<br />
a range of load<br />
resistances.<br />
A graphic display may be<br />
obtained to evaluate the<br />
measured data at first<br />
glance.<br />
08.02/<br />
Specifications, design and accessories are subject to<br />
change without any notice or obligation on the part of<br />
the manufacturer.