Infutest Solo - MTK Peter Kron GmbH

Infutest Solo
Single Channel Infusion Pump Analyzer
The Infutest Solo is the
competitive mobile single
channel infusion Pump
analyzer to assay infusion-
/ syringe-pumps effectively
and cost-consciously.
Features
Accuracy:
Infutest Solo has a deviation < 1% with all infusion pumps.
Multi-pump-test-data:
Infutest Solo stores data of over 120 testruns until they are deleted or transferred to
your PC.
Input via keyboard:
Infutest Solo offers manual access to every single dataset.
USB port:
Infutest Solo is equipped with a USB-port for most convenient data transfer to your PC.
Data transfer:
Infutest Solo includes a Windows-based software (“Micro-DTP”) for rapid data
transfers and easy to use data management and documentation.
Application:
Infutestt Solo is best suited for standard assays and may be operated both with line-
and battery- powersupply.
mtk Peter Kron GmbH Mess-Systeme für Medizintechnik Hard & Software
Zossener Straße 41, D-10961 Berlin Tel.+49 (0)30 / 69 81 88-40 Fax. +49 (0)30 69 81 88-49
Freeline 0800 040 50 30 www.mtk-biomed.de info@mtk-biomed.de

Specifications*
Flow-assay:
Range: 1 ml/h to 1000ml/h
Display-accuracy: 0.01 or 0.1 ml/h,
depending on the
selected rate
Volume range: 0 ml to 9999 ml
Volume accuracy: 0.01 ml, 0.1 ml or 1.0 ml
Time: hours, minutes, seconds
Max. assay duration: 100 h
Sensor resolution: ca. 0.137 ml
Accuracy: +/-1%, dispensed volume
>=1 ml
Display update rate:
1 ml/h: 8.2 min
10 ml/h: 49 s
100 ml/h: 5 s
1000 ml/h: 0.5 s
Recorded assay-data:
device no. and other -data
date and time of assay
dispensed volume, ml
assay-duration, h/min/s
average flow, ml/h
Pressure-assay
Range: 0 to 2586 mmHg (0 to 50
psi)
Accuracy: +/-1 % of display +/- 5
mmHg
Units : mmHg, additionally
selectable:
psi, kPa or Bar
Time measurement: mm:ss
Max. assay duration: 100 min
Scanning rate: 0.025 s
Display update rate: 0.5 s
Recorded assay-data:
device No. and other -data
date and time of assay
assayed max. pressure, units:
mmHg, psi/kPa/Bar
duration of max. pressure, units:
min/s.
User interface:
Display: 2 lines x 20 characters
Keyboard: 12 buttons
Battery status: LCD-display
Acoustic signal: „beeper“
Permanent memory:
• capacity: 8 KB
• type: EEPROM
• storage: > 120 assays
USB port:
Hardware interface: USB-port
Protocol: Standard ASCII
Transfer rate: 64 Bytes/ms
Download-duration: ca. 500 ms
Windows application: “Micro-DTP” (included)
RS-232 data transfer:
Hardware interface: RS-232 TXD
Transfer rate: 9600 baud
Download-duration: ca. 10 s
Automatic assays: user selectable
infusion- or occlusion
assay
Environment:
Temperature: 15°C to 40°C
Humidity: 10 – 90 %, non
condensing
Date/time:
Display: day-month-year
Time: 24 h-format
Power supply:
Rechargeable battery: 12V NiCd, 1400 mAh
Dimensions: 23 cm x 20 cm x 15 cm
Weight: 1,8 kg
Standard accessories:
User manual
Mains adaptor, 15 VDC, 800 mA
Tubeset with threeway valve
“refill syringe Micro-DTP” - Windows
(98/2000/XP) software
Optional accessories:
Barcode-scanner
CBM Citizen serial printer (7050-055)
CBM Citizen inked ribbon(7050-056)
CBM Citizen paper roll (7050-057)
USB-cable, type A to type 3
5-pin miniDIN to DB25 female for printer or
medTester
5-pin miniDIN to DB9 female for PC connection
*Specifications subject to change without notice.
mtk Peter Kron GmbH Mess-Systeme für Medizintechnik Hard & Software
Zossener Straße 41, D-10961 Berlin Tel.+49 (0)30 / 69 81 88-40 Fax. +49 (0)30 69 81 88-49
Freeline 0800 040 50 30 www.mtk-biomed.de info@mtk-biomed.de